CAPILLARY Quartz Liner for Split Operations, with Silanized Glass Wool, for Programmed-Temperature Split/Splitless Inlet System

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Kit includes all necessary items to install the TCD into theinstrument: detector, heater, sensor, heater block, 1/6 in. gasline, and flow controller pneumatics. How it Works: Balanced carrier flow is maintained through the analytical andreference channels. The filaments are electrically heated…

The gold seal forms a leak-free seal with the bottom of the inlet body and column ferrule to minimize both sample contamination and sample loss. Even small leaks in the split/splitless injection port can reduce system sensitivity, cause poor signal-to-noise ratio, increase column bleed, and even…

Multiple styles in tri-fold blister packs Fits 4890, 5890, 6850 and 6890 GCs Precision molded for accurate fit Premium 11 mm Bleed and Temperature Optimized (BTO)Septa feature a recess on the injection side that guides the syringe needle to the same point with every injection.…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The analytical technique known as thermal desorption (TD) provides the ability to measure volatile contaminants in air, toys, building materials, car cabins, and food. When the TD systems from Markes International are combined with Agilent GC and GC/MS systems, the results meet current requirements…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Benzidines Mix 1. 2 mL @ 2000µg/ml - in methanol2000 µg/ml - Benzidine2000 µg/ml - 3,3-Dichlorobenzidine

The Agilent 10 mL sample loop made of polyetheretherketone is ideal for AQUATek 100. Application: For AQUATek 100 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

We offer standard solutions to meet your environmental analysis requirements.

PerkinElmer’s FlowMark ™ flowmeter is specifically designed for use with gas chromatography (GC) instruments. The probe is applied directly to the gas flow stream and the measured flow rate is presented on the LCD screen. Units of flow are measured in mL/min. This unit provides continuous…

1/8 Graphite/Vespel Ferrule, Pkg. 10

PerkinElmer now offers a hand crimper and decapper developed with the user in mind. This robust and easy to use tool is ideal for consistent crimping and decapping of 11mm and 20mm caps - a must have for every lab!

Liner O-rings are used to form a proper seal around the outside of the inlet liner between the inlet weldment and the turn-top. O-rings are composed of either graphite or fluorocarbon material, Graphite O-rings are used when operating inlet temperatures exceed 350°C. Agilent fluoroelastomer or…

Packing for wide-bore glass liners.

Rated to 400°C, Advanced Green injector port septa was designed to combine significantly longer injection life, low bleed and low injection port adhesion. The result is a general use green septa made of uniquely formulated silicone rubber you can use for all your critical analyses. Packaged in a…

The Agilent Technologies tube made of durable PTFE material, is suitable for use with chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The PerkinElmer O-seal washer measuring 4.5 mm ID x 9.5 mm is made from stainless steel and is used with TurboMatrix HeadSpace traps.

The analytical technique known as thermal desorption (TD) provides the ability to measure volatile contaminants in air, toys, building materials, car cabins, and food. When the TD systems from Markes International are combined with Agilent GC and GC/MS systems, the results meet current requirements…

The analytical technique known as thermal desorption (TD) provides the ability to measure volatile contaminants in air, toys, building materials, car cabins, and food. When the TD systems from Markes International are combined with Agilent GC and GC/MS systems, the results meet current requirements…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The PerkinElmer regulator replacement kit makes use of gas chromatography technology for the regulation and monitoring of hydrogen.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The PerkinElmer flow measurement adapter comes inclusive of flame ionization detector and is mainly used in laboratory and manufacturing factories.

Ultra quiet for use in the laboratory area Compact size and light weight Commercial / Industrial grade 1 Year warranty on workmanship 5. 0 micron pre-filter and regulator Internally powder coated air tank to prevent rust Pressure switch for automatic operation Horse Power: 0. 60 Power…

The analytical technique known as thermal desorption (TD) provides the ability to measure volatile contaminants in air, toys, building materials, car cabins, and food. When the TD systems from Markes International are combined with Agilent GC and GC/MS systems, the results meet current requirements…

The PerkinElmer column cutter is made from ceramic and is mainly used in laboratory and manufacturing factories.

The Agilent Technologies capillary insert weldment is suitable for use with Agilent 7890 GC (gas chromatography) model. Application: For Agilent 7890 GC This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies intuvo gasket is made from solid polyimide material and can be connected with all face seals of fittings. This gasket prevents any leakage in the capillary flow path components thus preventing the need of cumbersome ferrules. It is easy to install and works better even at…

The PerkinElmer ATD sample tube measuring 0.196 Inch ID x 0.23 Inch OD has a solid stainless steel construction that gives more strength.