Gloves, MilliporeSigma
-
Zinc plated pump for Sigma-Aldrich 20 L Flex-spout cans
MilliporeSigmaThis Rieke pump is for dispensing solvents and non-corrosive liquids. The self-venting design eliminates a need for an air vent opening. Pump includes a plastic Flex-spout mounting cap and a stabilizing metal strap for mounting to Sigma-Aldrich 20 L Flex-spout cans. Pump may also be used with…
-
PTFE Tubing
MilliporeSigmaEconomical, flexible PTFE tubing is ideal for use at pressures up to 500 psi (35 kg/cm2). Use in automatic analyzer, postcolumn reaction, preparative scale systems, in-stream sampling devices, and when monitoring physiologically important compounds. The maximum recommended operating temperature for…
-
Polyetheretherketone (PEEK) tubing has become a popular replacement for stainless steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical…
-
-
Stainless Steel HPLC Fittings ferrule
MilliporeSigmaSynonyms: Valco® FERRULE 1/16 PK 10 Legal Information: Valco is a registered trademark of Valco Instruments Co. Inc.
-
Tee bore 0.020 in., 10-32 thread
MilliporeSigmaThe PEEK tees are to be operated at 4000 psi (281 kg/cm2). They include Fingertight III nuts and ferrules. Synonyms: Upchurch PEEK Fingertight Union
-
Frits for Isolation Technologies Precolumn Filter
MilliporeSigmaThe features of Frits for Isolation Technologies Precolumn Filter include: •In-line installation. •High capacity inlet filter, with 0.5 mum stainless steel frit. •Minimizes dead volume and band broadening, to prevent loss of column efficiency while protecting the column. •Includes two each of…
-
PEEK Tubing
MilliporeSigmaPolyetheretherketone (PEEK) tubing has become a popular replacement for stainless steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical…
-
Purge/Trap J BTEXTRAP(TM)
MilliporeSigmaTubes used in purge and trap analyses generally are packed with multiple beds of adsorbent materials, so that a broad range of polar and nonpolar, high and low molecular weight compounds can be trapped in a single tube. Each bed protects the next, increasingly active bed, by preventing compounds…
-
CHROMOLITH CAPROD RP-18E 150-0.1
MilliporeSigmaChromolith® CapRod is a capillary column that combines the speed of monolithic silica technology with the sensitivity of nano-LC, hence enabling new productivity levels for high-throughput proteomics LC applications. In contrast to microparticulate columns Chromolith® CapRod can be operated at…
-
-
PTFE Tubing
MilliporeSigmaEconomical, flexible PTFE tubing is ideal for use at pressures up to 500 psi (35 kg/cm2). Use in automatic analyzer, postcolumn reaction, preparative scale systems, in-stream sampling devices, and when monitoring physiologically important compounds. The maximum recommended operating temperature for…
-
PTFE Tubing
MilliporeSigmaEconomical, flexible PTFE tubing is ideal for use at pressures up to 500 psi (35 kg/cm2). Use in automatic analyzer, postcolumn reaction, preparative scale systems, in-stream sampling devices, and when monitoring physiologically important compounds. The maximum recommended operating temperature for…
-
Upchurch PEEK Fingertight Fitting nut and ferrule 10-32
MilliporeSigmaMaterial: PEEK nut and ferrule Packaging: pkg of 10 ea I.D.: 0.0625 in. (1.5875 mm) Fitting: nut and ferrule 10-32 General description The one-piece fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy…
-
PEEK Tubing
MilliporeSigmaPolyetheretherketone (PEEK) tubing has become a popular replacement for stainless steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical…
-
Slip-On Inlet Filter
MilliporeSigmaWe recommend this filter for solvent inlet applications. The 10 mum filter protects the HPLC system from contamination while minimizing pump cavitation problems. Compatible with the 1.5 mm I.D. tubing used with many HPLC pumps. Also fits the 2.2 mm I.D. tubing used with Varian pumps and the 3.0 mm…
-
Supelco® Precolumn Filter Direct-connect, PEEK
MilliporeSigmaDirect-connect; protects analytical and guard columns. Our precolumn filter can be connected directly, hand-tightened, into any HPLC column or guard column that has Valco-compatible end fittings. PEEK cap and body, 2 mum stainless steel frit. For a metal-free system, order PEEK (biocompatible)…
-
Peel-A-Way(TM) embedding molds Square S-22
MilliporeSigmaDisposable paraffin molds designed to be peeled from solidified embedding blocks.22mm x 22mm square x 20mm deep Storage: room temp Application: Peel-A-Way embedding mold has been used for sectioning of embryos. It is also used in preparation of acute slices from mouse spinal cord. Legal…
-
RheFlex® PEEK Fittings Long fitting set
MilliporeSigmaLegal Information: RheFlex is a registered trademark of IDEX Health & Science, LLC
-
-
Liquid Handling Equipment for 20L and 200L Drums
MilliporeSigmaLiquid Handling Equipment for 20L and 200L drums for safe and convenient dispensing of EMD Millipore products.
-
Union bore 0.020 in., 10-32 thread
MilliporeSigmaThe PEEK zero dead volume unions (bore 0.020 in., thread 10-32) need to be operated at 5000 psi (352 kg/cm2). They include Fingertight III nuts and ferrules. Synonyms: Upchurch PEEK Fingertight Union
-
MicroTight Adapters
MilliporeSigmaThese adapters will help create a true zero dead volume (ZDV) connection between 1/16" I.D. tubing and capillary tubing. MicroTight Adapters allow connection of 1/16" O.D. tubing directly to 1/32" O.D. and 360 μm tubing.
-
High Output & Chemical Duty Pumps
MilliporeSigmaThe High Output Pump features a piston-driven design for greater power. The Chemical Duty Pump has a chemically-resistant head and diaphragm for use with corrosive chemicals and solvents. The High Output and Chemical Duty pumps can support high flow rates to decrease process filtration time.…
-
Rheodyne® Injector Rheodyne, 7725i
MilliporeSigmaRheodyne® Injector model is a stainless steel version and comprises of a six-port sample injection valves in which the sample is loaded through a built-in needle port in the front of the valve. Legal Information: Rheodyne is a registered trademark of IDEX Health & Science, LLC
-
Supelco® ColumnSaver Precolumn Filter
MilliporeSigma•Economical protection for your guard or analytical HPLC column •No wrenches or tools required to install, fingertight to 5,000 psi •Lower dead volume than conventional filters with holders •Universal connection is compatible with all manufacturers fittings· The new Supelco ColumnSaver offers…
-
Union bore 0.010 in., 10-32 thread
MilliporeSigmaThe PEEK zero dead volume unions are to be operated at 5000 psi (352 kg/cm2). They include Fingertight III nuts and ferrules. Synonyms: Upchurch PEEK Fingertight Union
-
LiChrospher® ADS allows the fully automated, LC integrated sample preparation of hydrophobic, low molecular weight analytes from untreated samples like serum, milk, fermentation broth of food homogenates. The enrichment is based on two chromatographic processes: reversed phase and size exclusion…