Hplc Fittings

…fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit. The Upchurch PEEK Fingertight fittings…

…capIntegrity-testable with the bubble point methodEnd fittings included – for replacement rings and caps, see our IFD end fitting kitGE’s Solvent IFD is a high-flow HPLC in-line filter/degasser, designed to simultaneously filter and degas organically based HPLC mobile phases. Whatman IFD options…

For start-up and maintenance in all HPLC systems. The PEEK Survival Kit is an invaluable parts kit that contains tubing, fittings, and tools essential for setting up and maintaining your HPLC system: PEEK tubing, connectors, and elbows, PTFE tubing, a tubing cutter and extra blades, a ValvTool…

Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal Both hand-tight and hex-head styles wrench-tighten for reliable UHPLC use up to 20,000+ psi! Patented ferrule can be installed repeatedly without compromising high-pressure seal Hybrid design…

…filter/degassers (IFD) connect directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Aqueous IFD provides pure filtration of aqueous based HPLC mobile phases while the Solvent IFD is used with organically based HPLC mobile phases. Specifically, the…

Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal Both hand-tight and hex-head styles wrench-tighten for reliable UHPLC use up to 20,000+ psi! Patented ferrule can be installed repeatedly without compromising high-pressure seal Hybrid design…

…The slip-on filter easily attaches to the pump inlet line, without the use of wrenches. The universal 1/8" OD tip accommodates standard PTFE tubing inner diameters. The cylindrical filter is standard 10 µm porosity. Fits Altex, ISCO, LDC, Varian, Waters, PerkinElmer, and other pumps.

Made of flexible stainless steel (0.6 mm OD) with 1/16” OD tubing at both ends to accept standard fittings Pre-swaged fittings are assembled according to Swagelok specifications

Replaces stainless steel, titanium, PTFE, or Tefzel tubing Less oxygen permeable and more temperature resistant (to 100 °C) than PTFE or Tefzel tubing Use with PEEK finger-tight or flangeless fittings Use tubing ≤ 0.007" to 7,000 psi; tubing ≥ 0.010" ID to 5,000 psi

Different columns have different fitting requirements. (Zorbax columns use standard Swagelok fittings) Agilent 1100 modules use standard Swagelok fittings Rheodyne injection valves require Rheodyne fittings How do you choose the correct fittings? To ensure leak-free connections, and to prevent…

…bubble point methodIncludes end fittings – for replacements, see our IFD end fitting kitAqueous IFD from GE is a polypropylene housed in-line filter/degasser (IFD) with nylon membrane. It connects to an HPLC line and simultaneously filters and degasses during HPLC mobile phase preparation. Whatman…

Quickly and reliably connect two pieces of 1/16" tubing. 0.3 mm union bore. End fittings included.

…in stainless steel and polypropylene with luer fittings for use with a standard syringe. The holders are designed for the quick and easy clarification, sterilization, and removal of particulates from small volume samples, typically for HPLC applications. The holders contain PTFE gaskets and…

Cost-effective protection for UHPLC systems Reliable way to extend column lifetime Universal fit—connects easily to any brand column Leak-tight to 15,000 psi (1,034 bar) 0.5 µm or 0.2 µm titanium frit in a stainless steel body with PEEK ferrule

Precut, micropolished tubing and preseated fittings for quick, easy maintenance of your Agilent HPLC systems Meet or exceed manufacturer's performance.

Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal Both hand-tight and hex-head styles wrench-tighten for reliable UHPLC use up to 20,000+ psi! Patented ferrule can be installed repeatedly without compromising high-pressure seal Hybrid design…

…into narrow particle size ranges. Agilent offers LiChrosorb columns in C8 and C18 phases and in both 5 and 10 µm particle sizes. These standard fitting columns are packed by Agilent using ISO-regulated, automated packing procedures to ensure high quality column-to-column reproducibility.

To ensure leak-free connections, use the manufacturer’s recommended style fittings with columns, valves and unions. Peak shape and resolution may be lost by mixing fittings.

A good connection between HPLC components is necessary for trouble-free chromatography. Secure-Fit connectors from Restek and Selerity Technologies ensure a consistent, leak-free seal—and they eliminate excess dead volume! An internal spring mechanism holds the capillary tubing at the proper…

…prepleated filter paper for collecting very small particles and removing fine precipitates. Savings in time required to quadrant-fold circles to fit conical filter funnels in repetitive or multiple analyses. Decreased overall filtration time because of the extra surface area exposed; the normal…

…fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit. The Upchurch PEEK Fingertight fittings…

…1/4" compression end-fittings are compatible with 1/16" connecting tubing using Valco and Parker fittings. Fittings with distribution cone are intended for use on 3.0–4.6 mm ID HPLC columns Fittings with flat bottom are intended for use on 1.0–3.0 mm ID HPLC columns

…MNPT fitting, Straight Filter Fitting Pack is the replacement fittings for EZwaste® Solvent Waste System's fittings. It includes (10) 1/4" MNPT fitting, Straight Filter Fitting. 1170A83 The 1/4" MNPT fitting, Straight Filter Fitting Pack is the replacement fittings for…

Drill into the broken fitting, then screw the extractor into the fitting and remove it easily. Eliminates the need for heat or other techniques that could damage your column.

We manufacture our frits from fine, chromatographic-grade 316 stainless steel, and we offer sizes to fit most column and pore sizes. To choose the correct frit, check its pore size compatibility with the particle size of the packing in the column. If the packing has a smaller particle size than the…

A good connection between HPLC components is necessary for trouble-free chromatography. Secure-Fit connectors from Restek and Selerity Technologies ensure a consistent, leak-free seal—and they eliminate excess dead volume! An internal spring mechanism holds the capillary tubing at the proper…

…for HPLC applications and is suitable for either pump fed or gravity flow HPLC waste methods. Double fittings eliminate back pressure in liquid flow disposal line and provide controlled handling of vapors. Container automatically vents between 3 and 5 psig. Models with stainless steel fittings offer…

…separately available compression fittings. The compression fittings, sold in sets of six, accommodate tubing sizes of either 1/16" and 1/8" OD. The fittings are approximately 1" long and made of Tefzel™. They include ferrules for a compression fit to the waste line. …

A Trident in-line guard cartridge holder can be used with almost any HPLC column by connecting it with a short piece of 1/16" tubing, appropriate nuts and ferrules, or finger-tight fittings. The system can be used with Restek columns, or with columns from other manufacturers. Holders are…

…procedures. Agilent has engineered a bio-inert PEEK liner clad with high-strength stainless steel to withstand pressures of at least 600 bar. This same technology is used in Agilent capillary fittings – giving you a strong, metal-free, capillary/ connector flow path for bio-inert applications.