Bottles, Polypropylene
-
5 mL Centrifuge Tube Rack
SP Bel-ArtDesigned specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf…
-
The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Multi-Use Universal Vial Rack™ System
J.G. FinneranIncreased spacing allows the user to pipet samples or attach caps without removing the vials from the rack. Available 5 per case.
-
Colored Polypropylene Caps
DWK Life Sciences (Wheaton)Inner seal ring 45 mm size Caps have built-in, wedge-shaped sealing ring, eliminating the need for a liner. Use with Wheaton Lab 45® media bottles.
-
Sealing Cap
Thermo Scientific NalgeneAutoclavable Two-part assembly For attachment to centrifuge tubes or bottles to prevent leakage during extremely high speed centrifugation. Two-part assembly consists of polypropylene screw closure and a retained silicone gasket. Caps can be written on for easy notation.
-
20-410 Dropper Tip Caps
DWK Life Sciences (Wheaton)Screw cap made of radiation grade polypropylene Variety of colors Packaged in case of 100 or 1000
-
Open-Top Polypropylene Screw Thread Closures with Red
Chase ScientificConvenient assembly of caps and liners Available with standard or pre-slit septa Autoclavable and used for multiple injections
-
Centrifuge Bottles With Sealing Cap
Thermo Scientific NalgeneIdeal for bacterial, yeast and tissue isolations True one liter volume Autoclavable Excellent clarity and mechanical strength Non-cytotoxic USP class IV Recommended operating temperature: 4 to 22°C Storage to -70°C Leakproof up to 15,810 x g
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
Sealing Caps Oak Ridge™ PP / Silicone 63 mm
Thermo Scientific NalgeneThermo Scientific™ Nalgene Sealing Cap Assemblies ensure leakproof service of Nalgene centrifuge bottles at their recommended maximum rated speeds. They are also recommended for use when spinning hazardous materials.
-
58-400 Redi-Cap, PP White, Fmd PE Liner
DWK Life Sciences (Wheaton)Use these caps with WHEATON or other manufacturers# glass bottles or vials White polypropylene screw cap provides clear surface for writing on cap Foamed polyethylene liner provides chemical resistance for acids, alkalis, solvents, alcohols, oils, household cosmetics and aqueous products …
-
Polypropylene Dilution Bottles
Thermo Scientific NalgeneResistant to strong acids, alcohols and bases Nalge 2505 Autoclavable Polypropylene screw cap without liner Contact-clear bottles are graduated at 90 mL and 99 mL , accurate to 4 mL . Polypropylene copolymer, polypropylene screw closure. Temperature range -40 to 121°C…
-
Polypropylene Utility Trays
Thermo Scientific NalgeneUsed to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…
-
The 4-Way Flipper benchtop storage system combines four racks in one. Designed to support a variety of tube sizes and styles, each rack can be rotated to any of the four sides to support different size centrifuge tubes. Their rugged polypropylene construction allows them to be autoclaved, placed in…
-
96 Wells 0.2 or 0.5 mL tubes Alphanumeric grid Specifically designed for PCR research, this 96-well rack holds either 96 0.2 mL PCR tubes or 96 0.5 mL style microcentrifuge or PCR tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes.…
-
Polypropylene Racks for 12mm and 16mm OD Vials
DWK Life Sciences (Kimble)Disposable polypropylene vial rack Lettered and numbered for indexing individual tubes Corners interlock for convenient stacking
-
Replacement closed-top polypropylene closures and PTFE liners are sold separately and unassembled except for 1709B73, which is a 24-414 size that comes with a bonded-in PTFE-lined silicone liner.
-
Full-View Test Tube Supports
SP Bel-ArtHold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…
-
Tube and Cuvette Racks
EppendorfOptimize your workflows through user-friendly handling of clearly arranged samples. Eppendorf Tube Racks and Eppendorf Cuvette Racks are ideal for sample processing, transport, and short- to mid-term storage of samples. Well Organized - The Eppendorf Tube Racks and Eppendorf Cuvette Rack …
-
Bulk White Closures
I-ChemLDPE foam-lined white polypropylene cap Bottles sold separately: 013-series and 012-series Recommended for general purpose sampling where cleaning and certification is not required, or ready for your own cleaning and certification procedures Economically bulk packed Includes:…
-
CryoSure® & MST™ Vial Processing Racks
Caplugs Evergreen®Racks are designed for our CryoSure® vials & MST™ tubes, holding up to fifty vials/tubes in alpha-numerically labeled holes. The racks are autoclavable and stackable. Tubes and vials sold separately.
-
Scienceware® Vacuum Aspirator Bottle
SP Bel-ArtThe Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…
-
White Polypropylene Screw Caps
DWK Life Sciences (Wheaton)Bonded Teflon®-faced silicone liners White, autoclavable caps have a bonded Teflon-Faced Silicone Liner making them suitable for storage and containment of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005”…
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
Closure 18-415 0
DWK Life Sciences (Kimble)Closure of one-piece construction with a seal achieved due to a unique inner sealing ring. Intended for use with 73750, 73760 and 73770 disposable culture tubes and 73785 disposable centrifuge tubes. Natural polypropylene Autoclavable Designed from ASTM Specification E982
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Polypropylene Open-Top Screw Caps
DWK Life Sciences (Wheaton)Bonded Teflon®-Faced Silicone Liners White autoclavable open-top caps have a bonded Teflon-Faced Silicone Liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005” of…
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…
-
PPCO Centrifuge Bottles with Sealing Closure
Thermo Scientific NalgeneCentrifugalize low- to moderate-speed large-volume biological and chemical samples with Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, which include a sealing closure for added leakproof assurance at maximum speeds for when spinning hazardous materials. Molded of rigid and robust…