The Clinical 4-Way Tube Rack is the only tube rack specifically designed to hold round, flat & conical blood collection and culture tubes. It holds multiple tube sizes without multiple racks.  

Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…

Sturdy racks for transport or sample handling These compact chemical-resistant, epoxy-coated steel wire racks have a slotted bottom for better drainage and handling. Ideal for conical centrifuge tubes but can be used to hold other types and sizes of tubes. The 15 mL rack has 20 mm holes; 50 mL…

Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

Great alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…

Made of polypropylene The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base…

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…

Sterile, cotton-plugged, bagged N-51A borosilicate glass; color-coded, graduated scale Designed from ASTM Standard E-714 Tolerances: 1 mL pipet, ±0.02 mL ; 2 mL pipet, ± 0.4 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.30 mL Calibrated to tip, for blow-out, 7536S55 pipet is ungraduated below…

These reversible racks are designed to keep 0.5mL and 1.5mL( up to 2.0mL) microcentrifuge tubes organized and upright. Made of polypropylene, choose the blue rack for 60 tube capacity (5 rows of 12 tubes) or the larger orange rack for 96 tube capacity (8 rows of 12 tubes). Both racks have…

Dimensions: 246 x 105 x 64mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

Epoxy-coated steel wire, holds six bottles in 60 mm square grids on two levels Bottom level has rails to hold the tip of the conical bottom of the bottles Dimensions are 8-3/8” x 5-1/2” x 4” (20.8 x 13.5 x 10.2 cm H) Perfect for conical and round bottom bottles that can't stand…

Ideal for use in tissue culture work and other procedures performed under a fume hood or in other confined areas Calibrated to deliver with blow-out Reverse and negative calibrations Sterile Plugged Disposable serological pipets are packaged in color-coded, paper/plastic…

Cannot rust, chip or scratch Letters and numbers identify tube locations Assorted colors available These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’…

The 96 Well "Reversible" Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. …

Link together multiple racks Create as large a rack as you need by linking together multiple racks. Heavyduty polypropylene racks feature a unique system of tabs and slots, that facilitate easy connection and sturdy fit. Autoclavable. Assorted colors: blue, green, pink, yellow, and orange. Rack…

Attach several racks for large experiments Heavy polypropylene construction Glove friendly Hold 1.5/2.0 mL tubes Racks slide together on both sides. Internal ribbing make racks stable and sturdy. The “Hold-It” finger slot on the front of the racks allows racks to…

The PCR Storage Rack, by Heathrow Scientific, offers a sleek and modern design that’s packed full of features. The patent pending design offers a unique lid the rack slides out from, and then rotates 180°, to become a convenient stand the rack sits on. Ergonomic textured finger grips…

Made of polypropylene Versatile and easy to use Two sided Holds up to 25 tubes of 10 to 12 mm Accomodates 16 PCR or 0.2 to 0.5 ml tubes Supplied with handles This smaller model of the UniRackTM can hold up to 25 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x…

Durable racks for transport or sample handling Ideal for urine containers up to 58 mm dia Slotted bottom Mesh bottom support Chemically-resistant epoxy-coated steel wire racks Autoclavable

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

Close flat for compact storage! Pop up for quick use! Simple, easy action to open and close – expand and collapse when racks are needed. Designed to help organize 15 and 50mL tubes. Imprinted grid aids quick retrieval. Stack racks in open or closed position. Saves space when racks are not…

Made of polypropylene. The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base of…

Disposable, sterile, PYREX® individually wrapped Calibrated "to deliver" Has negative graduations and fire-polished tips for burr-free, even flow rates Individually wrapped in Steri-View™ wrapping (one side paper, one side plastic) for easier identification and opening

Polycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.

Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …

Autoclavable Durable polycarbonate Holds CryoTube vials and grips Nunc CryoTube vials with interlocking feet. Starfoot Cryotubes fit into grooves for one-handed operation.

These innovative Double Jumbo Test Tube Racks made of Polypropylene (PP) are used for high capacity storage for tubes, vials and Vessels. Extremely suitable for high throughput labs requiring large sample storage. Manufactured from sturdy and lightweight material suitable for easy movement and…

Open ended pipettes are just like the standard individually wrapped pipettes, but without the tip. The wide end opening is ideal when pipetting thick or viscous liguids, liquids that contain particulates which could block a standard tip pipette, or in applications where speed is critical. Supplied…

Polypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…

Durable racks for transport or sample handling Rack suitable for Universal, McCartney and Scintillation vials and low profile tubes up to 33 mm dia Available in a 2 x 6 or a 5 x 10 format Mesh bottom support Chemically-resistant epoxy-coated steel wire racks Autoclavable

Dimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…