Balance & Calibration Weights
Hooked weights and weight and hanger systems are particularly useful for calibrating scales that require a secure attachment method, enhancing stability during calibration. NIST traceable weights are highly sought for their guaranteed accuracy and traceability to national standards, providing confidence in measurements and compliance with regulatory requirements.
These tools, more than just instruments, are the backbone of any setting that relies on precise weight measurements. They offer not just reliability and consistency but also a sense of indispensability.
-
The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.
-
Precision Class E2 Weights
TroemnerClass E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Weight Set Hooked
GSC International, Inc.There are nine hooked weights in this set. The weights are as follows: one 1000g cast-iron hooked weight, one 500g cast-iron hooked weight, two 200g brass hooked weights, one 100g brass hooked weight, one 50g brass hooked weight, two 20g brass hooked weights, and one 10g brass hooked weight. Comes…
-
Weight set made from stainless steel Weights are slotted to fit and lock on to the hanger Hanging mass is perfect for balance testing and weight determination Good classroom tool for demonstrations on force and balance This Masses is perfect for labs and demos on force and balance,…
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Flat with one end turned up for easy handling Supplied in high quality polycarbonate case with…
-
Analytical Precision Class 1 Weights
TroemnerClass 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Weight Set Slotted with Hanger, 10 pcs
GSC International, Inc.This slotted weight set includes the following: Ten 10g plastic slotted weights One 10g hanger PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, which are known to the State of California to cause cancer, birth defects, or other…
-
OIML Precision Class F1 Weight Sets
TroemnerClass F1 Appropriate for calibrating high-precision top loading balances with a readability as low as 0.01 g to 0.001 g
-
Brass Weight Set Slotted
GSC International, Inc.This slotted weight set includes the following: One 500g brass slotted weight Two 200g brass slotted weight One 100g brass slotted weights One 50g brass slotted weight Two 20g brass slotted weights One 10g brass slotted weight One 50g hanger One weight rack PRODUCT…
-
ASTM Weights
Mettler ToledoHigh Gloss Polish: Experience, combined with special skill acquired through years of weight polishing guarantee the consistent high quality for all customer demands. Weight Calibration Performed by Robots: Substantial investments in cutting-edge robot technology combined with decades of…
-
Weight 3Kg
TroemnerUltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Metric, ASTM Class 1 calibration weight for calibrating other weights, or electronic balances and scales Stainless steel construction for stability, resistance to corrosion, and low magnetic susceptibility Cylindrical shape with groove for ease of lifting heavier weights Meets American…
-
Stainless Steel Basic Hooked Weight Set
United Scientific SuppliesSet of ten hooked weights are made of high quality stainless steel. Includes one of 200g, two of 100g, three of 50g, and four of 20g weights.
-
Analytical Precision Class 2 Weights
TroemnerClass 2 Appropriate for calibrating high-precision top loading balances with a readability as low as 0.01 g to 0.001 g.
-
Wt Analyt Ultra Cls w / TC 200G
TroemnerThe weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Cylindrical with handling knob Supplied in high quality polycarbonate case with red insert …
-
To get all the accuracy your electronic balance and/or scale provides, you need to perform routine calibrations and verifications using precision calibration weights. Troemner's Stainless Steel Electronic Balance Calibration Weights are intended for this purpose. Weights are available in a…
-
UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Class 4 For calibration of semi-analytical balances and for student use.
-
-
These weights are manufactured Troemner Alloy 8 Stainless Steel, which was developed by Troemner and is available exclusively through Troemner. This unique material possesses low magnetic susceptibility, uniform consistency and high resistance to corrosion. It is the finest grade of stainless steel…
-
To get all the accuracy your electronic balance and/or scale provides, you need to perform routine calibrations and verifications using precision calibration weights. Troemner's Stainless Steel Electronic Balance Calibration Weights are intended for this purpose. Weights are available in a…
-
Class 3 Appropriate for calibrating balances with moderate precision and with a readability as low as 0.1 g to 0.01 g. Flat with one end turned up for easy handling Weights are supplied in high quality polycarbonate case with red insert Manufactured in the USA Statement of…
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.
-
Weights are available with NVLAP* or Traceable Certificates To test commercial and non-commercial scales NIST Class F tolerances Designed for servicemen Class F weights are designed to check scales used in commercial and industrial applications where an accuracy of 0.1% or…
-
Weight Analyt Ultra Cls w / WCC 5Kg
TroemnerUltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…
-
Single hooked weight weighing 200g (0.44lbs) Cylindrical with cone shaped top Features hook for easy lifting and hanging. Bottom slot allows for other hooked weights to be attached in tandem Measures 1.25" in diameter, and is 2.75" in height Made of powder coated steel Single hooked weight.…
-
Laboratory Weighing
Mettler ToledoMETTLER TOLEDO's world leading expertise in metrology extends to weights, weight sets and weight calibration services. The weight portfolio covers OIML weights from fifty micrograms to five tons in all accuracy classes. Our weights are used all over the world, not only for testing balances but also…
-
Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies…