Calibration Weight Sets

Compare Tool

Select up to 3 products

Calibration Weight Sets
1 - 32 of 108
Sort
View
Show
  • …in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Sets are supplied in a rugged polypropylene case with a handle on top. Foam insert has compartments for each weight in the set. Set contains…

  • …ASTM E617-13 specifications ASTM Class 0 weight sets and individual weights are not individually marked with their weight value or individually serialized per ASTM E617-13 Nominal value marked on weights Serial numbers applied to case (weights may be marked with symbol) Density 7.95 g/cm…

  • Uncompromising selection of steel and rigorous control of manufacturing processes make these weights the excellent choice for balance calibration and testing. The proven one-piece design (monobloc) guarantees best long term stability and accurate testing results. Austenitic Stainless Steel …

  • Class E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.

  • Class F1 Appropriate for calibrating high-precision top loading balances with a readability as low as 0.01 g to 0.001 g

  • …device. Weight bottoms are slightly recessed to expose the smallest possible area to wear. Each weight (except Class 0 weights) is marked with its nominal value. Troemner Calibration Weights are available in either one-piece or two-piece construction. One-piece construction indicates the weight

  • Hooked Weight Set

    United Scientific Supplies

    Individually calibrated weights made of high quality stainless steel. Both sets come with a sturdy plastic storage block. Set of 9 includes 1 each of 5g, 10g, 50g, 100g, and 500g, plus 2 each of 20g and 200g weights. Set of 10 includes all of the previously mentions, plus 1 each 1000g weight.

  • Class E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. NVLAP Accredited Certificate Troemner's NVLAP Accredited Certificate provides compliance in…

  • …primary reference for calibrating other reference standards and weights. Class 0 weights are intended to be used in metrology laboratories where the stability of the environment and careful handling are assured. Although very stable, one-piece construction Class 0 weights have no method of…

  • …device. Weight bottoms are slightly recessed to expose the smallest possible area to wear. Each weight (except Class 0 weights) is marked with its nominal value. Troemner Calibration Weights are available in either one-piece or two-piece construction. One-piece construction indicates the weight is…

  • Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.

  • Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.

  • …standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg. Weight Sets are supplied in a high quality polycarbonate case with a compartment for each weight as well as compartments…

  • …for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg. Weight Sets are supplied in handcrafted wood cases. Includes a compartment for a polycarbonate case which holds weights 500 g…

  • …in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical Stainless Steel and Cast Iron Weights, where…

  • …each calibration weight comes in a protective plastic case. The W1000 series of individual weights come in protective plastic cases with a screw top cover. The W1100-200 Weight Set includes 23 weights ranging from 1mg to 200g and is packaged in a protective carrying case with a set of tweezers,…

  • …which holds weights 500 g and below. 1 kg and 2 kg weights are held in individual polycarbonate cases inside a felt-lined cutout. 5 kg weight sits in a felt-lined compartment within the wood case. Class 1 Can be used as a reference standard in calibrating other weights and is appropriate…

  • Class 2 Appropriate for calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g.

  • …collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cable for USB and RS-232 connectivity. Meter Kit includes Meter, "All-in-One" pH probe 35808-71, RDO probe 35640-53, sensor cap, RDO weight, calibration tube, calibration solutions, two AA batteries,…

  • Class F2 For calibration of semi-analytical balances and for student use.

  • Class 3 Appropriate for calibrating balances with moderate precision and with a readability as low as 0.1 g to 0.01 g.

  • …in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical Stainless Steel and Cast Iron Weights, where…

  • …platform. Capacity is 610g, and optional weight set extends capacity to 2610g. Limited five year warranty. Features: Notched and tiered beam, front beam calibration 0.1g sensitivity Middle Beam- 500g x 100g Rear Beam- 100g x 10g Weight Set included with selected models (2 x 1000g /…

  • …Moreover, it is also possible to use standardized Q-Apps applications for the determination of the minimum sample weight according to USP as well as for easy pipette calibration. Workflows can be performed independently and do not necessarily require a PC connection. Q-Level - The Automatic,…

  • …in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical Stainless Steel and Cast Iron Weights, where…

  • …in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical Stainless Steel and Cast Iron Weights, where…

  • …in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical Stainless Steel and Cast Iron Weights, where…

  • Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies…

  • …are factory calibrated in accordance with ISO 8655 standards, and include a factory calibration certificate. NextPette Micro Starter Kit Set (Thomas No. 1160X96) Includes: P7700-10, P7700-20, P7700-200, P7700-1000, P7700-CAR NextPette Macro Starter Kit Set (Thomas No. 1160X97)…

  • UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…

  • UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…

  • Class 4 For calibration of semi-analytical balances and for student use. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical Stainless Steel and Cast Iron Weights, where a certificate is not ordered is supplied with a Statement of Accuracy. This…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.