The lab filtration pump that transfers filtered liquids directly to waste Designed to improve operation time and comfort Simply connect the pump to your manifold or filtration apparatus and place the discard tubing to drain and you are ready to filter. There is no need to use additional…

TPM Variable-Speed Transfer Pumps PumpPro® TPM Variable speed transfer pumps 20 to 1 speed control Reversible Pump features 20 to 1 speed control and reversible flow. Versatile, easy-loading pumphead with spring-loaded rollers accepts seven tubing sizes without…

The Micro-Perfusion Pump is a miniature, single or dual, channel, full-featured peristaltic pump designed for specific ranges of flow rates conducive to microscopy. Unlike most peristaltic pumps that are driven by stepper motors, the Micro-Perfusion Pump is driven by a tachometer regulated,…

Peristaltic pump for continuous delivery in speed ranges from 0.2 to 100 revolutions per minute rotarus® volume 50 is a comfortable, precise dispensing pump with control options for velocity, flow rate, dispensing duration and total volume. Variable cycles and graduated pump speeds can be…

1/3 hp submersible sump pump with cast iron housing, polypropylene base, polycarbonate cover, and thermal overload protection. “CIA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". The 6-CIA-RS has a piggyback diaphragm switch with same “on/off”…

1/3 hp Automatic Utility pump with durable reinforced thermoplastic pump casing, continuous duty ?oil free” motor, bottom suction design with built-in strainer to eliminate internal damage from possible debris, removable filter screen for easy cleaning, and 1-1/4? NPT discharge. SP33A features an…

Submersible pumps with Fluoroelastomer (FKM) seals, 1/4" MNPT discharge, master builders conduit fitting, 6' power cord without plug. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory.

Flow Rate Range: 1-50 mL/min Power Voltage: 110-120 / 220-240 V~ Purification Technique: PLC Max Pressure: 300 bar Gilson products are intended for sale/shipment within the US only. International customers should contact their local Gilson distributor to place orders for Gilson products.

314X Four roller extension pumphead attaches to 314D/A or 313D2/A channels depending on drive torque.

The telescopic immersion tube adapts itself to the container height on insertion of the foot pump. This ensures good removal of residual liquid and means that the foot pump can be used with different containers. Simple handling: Both hands remain free for filling Very good pump capacity…

Solvent pump foot operated for filling off high purity liquids such as solvents. Pouring flammable liquids All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so…

The barrel pump's universal adapter fits onto container openings of 30 - 70 mm, closing tightly. The container screw joints can be screwed into the container with the 3/4" thread and lock nut. The gas-tight barrel pump enables odour-free transfer. During transfer with normal…

Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with…

Microsart e.jet Transfer Pump: The Microsart e.jet pump reduces operating complexity, conserves space and offers exceptional overall cleanliness. The e.jet is designed to pump both gas and liquids collectively, allowing the powerful system to draw simultaneous vacuum filtration and transfer the…

GoatThroat pumps, long valued for their innovative design combined with a simple, safe, and clean hand-operated fluid delivery system, bring another innovative advancement to the industrial marketplace. These small, versatile pumps can now safely be used with shop air, aircompressors or…

Heavy-duty Pump siphons up to 7 gallons per minute from 55-gallon drums. Moves up to 7 gallons of liquid per minute Compatible with mild solvents, light oils, diluted acids/caustics and disinfectants Maximum recommended viscosity: equal to 30-40 wt. oil

NF1.300.KT.18S LIQUIPORT Liquid transfer pumps with brushless DC motor for improved service life and integrated overheating protection PP head, PTFE coated diaphragm, and FFKM valves Simple and intuitive operation Self priming, can run dry. Analog control Splashproof IP5, small…

VELP Scientifica has developed a range of peristaltic pumps useful for transferring liquids in industry sectors like pharmaceutical, food, biotechnological, chemical, beverage. Simple Operation Minimum maintenance (just replace the tube) Easy cleaning – no contact of liquid…

The 300 series of interchangeable OEM pumpheads also includes the 304MC and 308MC microcassette pumpheads with a choice of four rollers for higher flow or eight rollers for higher precision. Microcassette pumpheads are available with three or 5 pumping channels.

Simple and Intuitive Operation Easy Calibration Cycle mode and adaptable to fluid characteristics Self priming, can run dry and dose up to 999 ml in one cycle Various control options Splashproof IP65 Small footprint

The VERITY® Syringe Pumps provide speed and reliability to small- and large-volume, repetitive liquid transfers in HPLC, SPE, and other general liquid handling methods.These pumps work with many VERITY systems and are available in single syringe, dual syringe, and dual syringe with tee…

Programmable variable speed peristaltic pump; 0.5 - 400 rpm Icon driven 5” interface For use with 2 – 8 mm ID tubing Dispense range 0.01 – 999.99mL Accommodates multiple pump heads System allows for speed ramping, flow mode and programmable drawback The…

5 Series: 1/6 hp Submersible Sump/Utility Pump with cast aluminum housing, plastic base, bottom sump-type pick-up with removable plastic screen, pumps down to 1/8", thermal overload protection, 1" FNPT discharge with a garden hose adapter. 5-ASP features a diaphragm pressure switch…

The Franklin Electric 505712 is for submersible use only; this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter. Utility Water Pump: For submersible use only; this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and…

Specifications: Dimensions H x W x D: 10 Inches x 6.5 Inches x 4.5 Inches Pump Head: PVDF Diaphragm: PTFE Coated Valves: FFPM Maximum Head Pressure: 14.5 psi Power Requirements: 115V, 60Hz Head Connections: 1/2” Compression Fittings PLEASE NOTE: DESIGNED FOR SCRUBBER…

The Watson-Marlow manifold pump is mainly used to control and direct pumping of high value fluids or samples. It is used in pharmaceuticals, food and beverage industries and chemical processing.

Reliable filling of small quantities The Mini Solvent Pump is a high-quality hand pump for use with liquids and flammable media such as acetone, ethanol, isopropanol and methanol. Use with small containers such as bottles, canisters, carboys and tanks with GL45 threads, from 1 liter up to ~ 10…

For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

The Watson-Marlow accessories are suitable for use with DPM dispensing and transfer pump models, which are mainly used to overcome fluid handling challenges in various industries. These accessories ensure versatile, smooth and uninterrupted functioning of the transfer pumps.

Device for easy operation to quickly fill off watery liquids from containers higher up to containers lower down. Works according to the siphoning principle: Liquid needs only to be primed once, therefore especially handy for complete emptying of a container. LDPE/PVC Pump capacity 9…

Non-submersible high pressure pump used for carpet cleaners, dispenser displays and pressure washer applications. 3/8" OD barbed intake and discharge, 24" lead wires.

Self-priming, completely submersible Output 3 1/4 gpm (12 Lpm) at one-foot (0.3 m) head, 2 gpm  (7.5 Lpm) at five-foot (1.5 m) head; maximum pressure 3.2 psi (22 kPa) Continuous-duty, 1.1 ampere motor, sealed and permanently lubricated, enclosed in epoxy-coated, cast-aluminum…