Microsart e.jet Transfer Pump: The Microsart e.jet pump reduces operating complexity, conserves space and offers exceptional overall cleanliness. The e.jet is designed to pump both gas and liquids collectively, allowing the powerful system to draw simultaneous vacuum filtration and transfer the…

Programmable dual speed peristaltic pump; 75 & 150 rpm Icon driven 5” interface For use with 2 – 8 mm ID tubing Dispense range 0.01 – 999.99mL The Wheaton UniSpense PRO is an intelligent peristaltic pumps for all of your dispensing needs. Whether you are…

Peristaltic pump for continuous delivery in speed ranges from 0.2 to 100 revolutions per minute rotarus® volume 50 is a comfortable, precise dispensing pump with control options for velocity, flow rate, dispensing duration and total volume. Variable cycles and graduated pump speeds can be…

GoatThroat® Pumps work by pressurizing a container to dispense liquids with one touch, as easily as using a faucet. A few strokes of the piston can pressurize any container from 2-gallon jugs to 55-gallon drums. One-touch flow control dispenses liquids at a controlled rate to prevent…

SCI Q Speed range 0.5-90 rpm Switch selectable from 100-120 V to 220-240 V Digital closed-loop 180:1 speed control Pump liquids from 0.0003 to 21 mL /min per channel through 4 to 32 channels. Cartridges can be added or removed without disturbing pumping action of remaining…

The telescopic immersion tube adapts itself to the container height on insertion of the foot pump. This ensures good removal of residual liquid and means that the foot pump can be used with different containers. Simple handling: Both hands remain free for filling Very good pump capacity…

rotarus® smart rounds off the selection of rotarus® pump drives in the basic segment.  The control panel on the housing enables simple and rapid configuration of the most important parameters, and the speed can be programmed directly on the unit.  Thanks to its low space…

The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate…

Dispensing with the intelligent rotation Hirschmann has now applied experience gained from dispensers with pistons to the principle of continuous delivery by a pump,  and this is reflected in the pump head series for piston pumps. The pump head is available with pistons in a…

This Rieke pump is for dispensing solvents and non-corrosive liquids. The self-venting design eliminates a need for an air vent opening. Pump includes a plastic Flex-spout mounting cap and a stabilizing metal strap for mounting to Sigma-Aldrich 20 L Flex-spout cans. Pump may also be used with…

Backlit LCD Continuous dispense volume display Model 7888R96 is a single syringes infusion pump holding one syringe, 10 µL to 60 mL. 

The Safe-T-Feed® system keeps the concentrated peracetic acid product entirely contained and away from operator contact or contamination throughout the entire process. No bung removal is required to insert dip tubes, and no open drums means no accidental contamination.

The Aether series Vacuum Pump is a high-speed, motor direct drive, dual-stage oil-sealed rotary vane pump. Suitable for use with inactive gases within the scope of low vacuum with a small amount of non-condensable gas. Features: 142 L/min free air displacement High Reliability High…

The barrel pump's universal adapter fits onto container openings of 30 - 70 mm, closing tightly. The container screw joints can be screwed into the container with the 3/4" thread and lock nut. The gas-tight barrel pump enables odour-free transfer. During transfer with normal…

TPM Variable-Speed Transfer Pumps PumpPro® TPM Variable speed transfer pumps 20 to 1 speed control Reversible Pump features 20 to 1 speed control and reversible flow. Versatile, easy-loading pumphead with spring-loaded rollers accepts seven tubing sizes without…

NF1.300.KT.18S LIQUIPORT Liquid transfer pumps with brushless DC motor for improved service life and integrated overheating protection PP head, PTFE coated diaphragm, and FFKM valves Simple and intuitive operation Self priming, can run dry. Analog control Splashproof IP5, small…

These pumps feature an oil-filled motor housing with a radial lip seal on the motor shaft. They have an exceptional life expectancy because oil serves as a continuous lubricant for all the moving parts and the shaft seal. This non-toxic dielectric oil, often paired with an aluminum, cast iron or…

Solvent pump foot operated for filling off high purity liquids such as solvents. Pouring flammable liquids All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so…

The Micro-Perfusion Pump is a miniature, single or dual, channel, full-featured peristaltic pump designed for specific ranges of flow rates conducive to microscopy. Unlike most peristaltic pumps that are driven by stepper motors, the Micro-Perfusion Pump is driven by a tachometer regulated,…

Due to the high chemical resistance of the medium-contacting parts made of PTFE and FEP, even liquids which attack conventional materials such as PP or PVC can now be safely transferred (except for elemental fluorine) with this barrel pump. The barrel pump is also suitable for transferring…

Very flexible output/flow with the same pump Corrosion-proof with glass fiber reinforced polypropylene housings Adjustable stroke length and frequency Very low minimum outputs possible with 200:1 turndown ratios Maximum flow rates of up to 34 LPH at 60 psi …

The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the hand pump can be used with different containers. Particularly compact, space-saving hand pump Good pump capacity With universal bungs made of…

The Watson-Marlow manifold pump is mainly used to control and direct pumping of high value fluids or samples. It is used in pharmaceuticals, food and beverage industries and chemical processing.

GoatThroat® Pumps work by pressurizing a container to dispense liquids with one touch, as easily as using a faucet. A few strokes of the piston can pressurize any container from 2-gallon jugs to 55-gallon drums. One-touch flow control dispenses liquids at a controlled rate to prevent…

Simple and Intuitive Operation Easy Calibration Cycle mode and adaptable to fluid characteristics Self priming, can run dry and dose up to 999 ml in one cycle Various control options Splashproof IP65 Small footprint

The Sterisart® Gen 4 Pump features a compact, universal design that easily fits into various workspaces, including benchtops in laminar airflow cabinets, RABS, and sterility testing isolators. Select the model that meets your needs with the convenience of built-in upgradability.

We offer a broad range of thread adapters. This facilitates the secure connection of many of our pumps and discharge cocks to a variety of containers. You will always find the correct connection thanks to the combination of different adapters.

Reliable filling of small quantities The Mini Solvent Pump is a high-quality hand pump for use with liquids and flammable media such as acetone, ethanol, isopropanol and methanol. Use with small containers such as bottles, canisters, carboys and tanks with GL45 threads, from 1 liter up to ~ 10…

Programmable variable speed peristaltic pump; 0.5 - 400 rpm Icon driven 5” interface For use with 2 – 8 mm ID tubing Dispense range 0.01 – 999.99mL Accommodates multiple pump heads System allows for speed ramping, flow mode and programmable drawback The…

The Poly-Hand Pump threads directly to a standard drum bung or carboy. It is constructed entirely of rugged polyethylene and is inert to strong acids, alkalis and many solvents. Delivers by positive pressure on the downstroke of the piston; does not pressurize the vessel Ergonomic…