Nebulizers, ICP-MS, Chemicals
-
Capillary Tubing 18 0.043 x 0.017 for Mira Mist
PerkinElmer0. 5 meters of . 044 OD X . 018 ID. Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines.
-
The internal standard mixing tee is perfect for online addition of internal standard or online dilution. Achieves excellent mixing with minimal dead volume.
-
The PEEK Mira Mist ® nebulizer produces excellent mist and can handle high level of particulates in sample. Fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its features include standard pressure (45 psi), low sample flow and enhanced parallel path design.
-
GemCone High Dissolved Solids Nebulizer
PerkinElmerHigh solids Gem Cones are for samples with high dissolved solids (up to 20%). This cone spray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer. Gem Cone nebulizers require an end cap for use with Ryton Scott Spray Chambers. High…
-
The SeaSpray ™ concentric nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization ef ciency for trace level analyses. It offers freedom from clogging while nebulizing solutions to the limit of solubility of most mineral salts and conferring significant…
-
Replacement connector and sample tubing for glass concentric nebulizers with EzyFit sample inlet.
-
The GemCone low-flow nebulizer permits lower nebulizer flow rates, useful for spectral lines with high excitation energies and for providing a more robust plasma. The nebulizer is optimized for low nebulizer gas flow for use with cyclonic spray chambers. It requires an end cap (N0680504) for use…
-
The Cross-Flow II Nebulizer is made completely from chemically inert non-metallic materials. With new GemTips optimized for ICP-MS(0. 009in and 0. 013in orifices), the new ICP-MS Cross-Flow II Nebulizer is specially manufactured and cleaned for ultra-trace analysis. Providing high sensitivity and…
-
This nebulizer self-aspirates at low-flow rates with any autosampler and provides the same benefits of the PFA MicroFlow nebulizer. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is…
-
Type A0.5 Quartz Nebulizer for NexION
PerkinElmerThe MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and…
-
The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists with sample uptakes 0.2 – 0.4 mL/min are fitted with a UniFit connector with 1.3 O.D. x 0.50 mm I.D. x 700 mm long sample tubing. MicroMists with sample uptakes 0.05 – 0.1 mL/min are…
-
Fused Silica Obstruction Removal Kit for ST type Nebulizers. Used to clear blockage from ST type nebulizers. Inc Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final…
-
The UniFit connector is a convenient drain connector for glass cyclonic spray chambers.
-
This kit includes: MicroMist ™ Nebulizer, Qty. 1 (N0775342) Quartz Cyclonic Spray Chamber, Qty. 1 (WE025221) 2 mm I.D. Quartz Bore Injector, Qty. 1 (WE023948) Tygon Tubing 3.175 mm I.D., Qty. 1 (02506516) 3.175 mm Tubing Insert, Qty. 1 (09903094) Front Ferrule for 6.35 mm Tube Fitting, Qty.…
-
F0 Encapsulated Micro Capillary
PerkinElmerF0 Encapsulated micro tubing for microflow rates with the lowest internal volume of any nebulizer. Includes 0. 25 mm i. d. (green marker) 70 cm long micro capillary. Compatible with all MEINHARD Plus nebulizers.
-
Nebulizers And Nebulizer Supplies
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Cyclonic spray chamber drain fitting
PerkinElmerCyclonic spray chamber drain fitting with ETFE capillary tubing - 24 length by 0.030 ID x 0.062 OD.
-
2 mm gas line with UpChurch fingertight fittings for Mira Mist and Ari Mist nebulizers.
-
-
ICP-OES Nebulizers
Agilent TechnologiesAgilent offers a wide range of concentric and microconcentric glass nebulizers to facilitate sample introduction for a variety of ICP-OES measurements. Nebulizer styles can accommodate samples with up to 20% total dissolved solids (TDS) and slurry samples containing more than 20% total dissolved…
-
Low-Flow GemCone for Optima 3X00 Nebulizer
PerkinElmerCan be used with either the glass Cyclonic spray chamber or the Ryton ® MEINHARD ® end cap. RequiresMEINHARD ® End Cap II, P/N N0680504, when used with the Ryton ® double-pass, Scott-type spray chamber(glass or Ryton).
-
Eluo Nebulizer Cleaner
PerkinElmerEluo Nebulizer Cleaner Particle build-up in a nebulizer capillary and tip causes sample flow to be constricted, thereby reducing nebulizer efficiency andperformance. Previously there was no simple way to effectively clean and unblock nebulizers. Now, blocked nebulizers can be safelyand easily…
-
SeaSpray U-Series Nebulizer 1mL/min
PerkinElmerMaterial: Borosilicate glass High physical reproducibility ~ 1%, TDS tolerance, typically up to 20%, High tolerance to particulates, typically up to 75um, Low RSD's due to highly accurate construction
-
-
The PEEK Ari Mist ® nebulizer provides very low sample flow and is for samples that are particlate free. Operates on stand pressures of 40 - 50 psi. Fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its features an enhanced parallel path design.
-
Gem tip Cross-Flow II Tip Kits for Optima 8x00
PerkinElmerThe PerkinElmer GemTip Cross-Flow II Tip Kit is for use with the Optima 8x00 ICP-OES. Excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and samples with less than 5% dissolved solids. The Tip Kit includes a clear sapphire sample tip and a red ruby argon…
-
PFA-ST nebulizer for prepFAST
PerkinElmerPFA-ST self-aspirating nebulizer for prepFAST, with external 1/4-28 threaded connector.
-
PTFE Capillary Tubing
PerkinElmerPFA sample capillary 0. 062 o. d. x 0. 020 i. d. in (1. 59mm x 0. 5mm)60cm length. For use with P/N WE024372 connector.
-
The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists with sample uptakes 0.2 – 0.4 mL/min are fitted with a UniFit connector with 1.3 O.D. x 0.50 mm I.D. x 700 mm long sample tubing. MicroMists with sample uptakes 0.05 – 0.1 mL/min are…
-
EzyLok Kit for Glass Concentric Nebulizers
PerkinElmerIncludes: EzyLok Connector for 4mm Tubing EzyLok 6mm Hose Adaptor Nebulizer Hose Clip
-
-
Quick Release 2000/4000/5000-Mira Mist
PerkinElmerQuick Release for PE Optima 2000, 4000, 5000 series.