ICP-MS Nebulizers
These nebulizers convert liquid samples into aerosols, which are then transported into the plasma torch for analysis. The precision of ICP-MS Nebulizers, particularly those from the nebulizer ICP range, allows for detecting trace elements and isotopes at extremely low concentrations, making them invaluable in environmental monitoring and geochemistry. Their design ensures minimal sample loss and maximizes analytical sensitivity, offering reliable and consistent performance.
By providing a seamless interface between liquid samples and high-temperature plasma, these nebulizers support the advanced analytical capabilities of ICP-MS systems, contributing to the generation of accurate and reproducible results.
-
F2 Standard Integrated Capillary
PerkinElmerF2 Standard Integrated Capillary (standard fitting with + nebulizers). F2 Standard integrated capillary for self-aspiration or pumping. Includes 0. 5 mm i.d. (orange marker) 70 cm long capillary.
-
MicroFlow nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport efficiency and high sensitivity. The PFA-ST3 Nebulizer is designated for superior clog resistance and higher sensitivity compared to the standard PFA nebulizer. • All PFA…
-
PFA MicroFlow high solids large bore nebulizer with external 1/4-28 threaded connector. Ideal for strong acids, high solids, alkalis, organic solvents, soils and high salt solutions.
-
The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization effciency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts, and conferring signifcant…
-
The MicroMist ™ micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists with sample uptakes 0.2 – 0.6 mL/min are fitted with a UniFit connector with 1.3 mm O.D. x 0.50 mm I.D. x 700 mm long sample tubing (N0777513). MicroMists with sample uptakes 0.05…
-
-
Cross-Flow II Replacement GemTip for ICP-MS
PerkinElmerIncludes a color coded set of ruby and sapphire GemTips optimized for use with ICP-MS. Orifice size: argon, (0.23mm, 0.009in) ruby red; sample, (0.34mm, 0.013in) clear. For use with the Cross-Flow II Nebulizer only.
-
Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow…
-
200 uL/min self-asp capillary
PerkinElmer200 µL/min self-aspirating sample capillary for ST nebulizer. 0.30 mm i.d., yellow marker
-
Includes all O-Rings used in the Cross-Flow and Cross-Flow II nebulizers.
-
This nebulizer clip snapper, for MEINHARD nebulizers, is used with Avio 200 and 500 ICP-OES, and Optima 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments.
-
Adapter Tubing GemTip Nebulizer
PerkinElmerUsed to connect capillary tubing (Product Number: 09908265) to Cross-flow nebulizers, and to larger i.d. peristaltic pump tubing.
-
Nebulizer liquid fitting with ETFE capillary tubing - 4 length by 0. 020 ID x 0. 062 OD flanged onto female CTFE fitting Includes one male barb CTFE fitting.
-
The MEINHARD concentric glass nebulizers reflect exacting standards in design and manufacturing. They provide excellent sensitivity and precision for aqueous solutions and samples with few dissolved solids (less than 1%). MEINHARD nebulizers for Optima instruments include Standard Nebulizer…
-
Concentric Quartz Nebulizer, MEINHARD Type A3
PerkinElmerThe MEINHARD concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control.
-
PFA-200 Microflow Nebulizer 20 uL/min
PerkinElmerPFA-200 Microflow Nebulizer, 200 µL/min, with integrated autosampler probe [Ultem support] for ESI SC Autosampler. HF Resistant. Capillary length 150cm. Probe length 175 mm.
-
Previously there was no simple way to effectively clean and unblock nebulizers. Now, blocked nebulizers can be safely and easily restored to optimum performance with a revolutionary new cleaning instrument - the Eluo. The Eluo is designed to efficiently deliver a cleanser through the nebulizer…
-
Concentric Glass Nebulizer, MEINHARD Type C
PerkinElmerThe MEINHARD® concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. For use with high dissolved solids solutions.
-
ST3 MicroFlow PFA nebulizer
PerkinElmerThe ST3 MicroFlow PFA nebulizer has an exchangeable external sample uptake capillary. The sample uptake rate is controlled by the diameter of the external capillary or probe.
-
Type C0.5 Glass Nebulizer for NexION
PerkinElmerThe MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and…
-
-
Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow…
-
The UniFit sample tube connector is used with U-Series nebulizers.
-
Complete HF-resistant sample introduction system for NexION 300 and 350. All wetted surfaces are PTFE and Sapphire. Provides a chemically inert and clean introduction system. This kit includes: 47 mm PFA Barrel Spray Chamber with Endcap (N8142000) PFA-ST Nebulizer (N8122192) 1.8 mm I.D.…
-
Concentric PTFE Nebulizer - PFA-ST
PerkinElmerUltraclean PFA PTFE nebulizer with exchangeable capillaries to provide flow rates from 100-400 uL/min. For use with autosamplers. Requires union N8122355 to connect to autosampler probe.
-
One Sample Introduction Line for PFA-ST Nebulizer is included in the NexION 2000 ICP-MS Productivity Configuration's Consumable Kit (N8150056) and the Semi Configuration's Consumable Kit (N8150057).
-
GemTip Crossflow Nebulizer
PerkinElmerContains a PPS (carbon-filled polyphenyl sulfide) end cap with a Gem Tip clear sapphire sample tip and a Gem Tip red ruby argon tip.
-
-
The DuraMist concentric nebulizer is an economical nebulizer for high precision analyses involving samples digested in HF. The DuraMist nebulizer is recommended for samples containing up to 5% HF. For samples with higher concentrations of HF, the OpalMist PFA nebulizer is recommended.
-
Slurry Nebulizer 4mL/min for ELAN/NexION
PerkinElmerMaterial: Borosilicate glass High physical reproducibility ~ 1% TDS tolerance, typically ~ 1% High tolerance to particulates, typically up to 150um Low RSD's due to highly accurate construction Slurry nebulizers have a natural liquid uptake of 4mL/min but operate best between 1.5 - 2.5mL/min
-
-
The UniFit sample tube connector is used with U-Series nebulizers.