Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

SPS 3/4 Pump tubing, Santoprene, 3-bridged, gray/gray, 6/pk. Suitable for ketone-based solvents including MIBK and DIBK. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Probe, inert, 1.0 mm id, PTFE-sleeved, for SPS 3 autosampler for operation with AA, MP-AES, ICP-OES, and UV-Vis instruments (or with diluter). Application: For SPS 3 Autosampler For Operation With AA, MP-AES, ICP-OES, & UV-Vis Instruments (or With Diluter) This product is only available to U.S.…

The Agilent Technologies capillary tubing measuring 0.023 Inch x 10 Feet provides a secure connection for 0.038 Inch Dia tubes. Polyethylene construction provides added strength and durability and is designed to use with cross-flow and high solids nebulizers. Application: For Sample Tubing,…

The Agilent Technologies nebulizer spring features a solid stainless steel construction that provides durability and prevents corrosion. Application: For AAnalyst 100/200/300/400/700/800 & PinAAcle 900, PerkinElmer AAS Instruments This product is only available to U.S. Domestic Customers. …

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For Amalgamation System, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer FIMS/FIAS …

Agilent graphite furnace AAS electrodes provide good electrical contact, ensuring you achieve optimum performance with maximum tube life. Application: For Agilent GTA120 Zeeman Graphite Furnace AA This product is only available to U.S. Domestic Customers. For research use only, not to be…

Nebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For…

A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES, and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the ASX 500 Series used with earlier model instruments. Each model autosampler is designed…

The Agilent Technologies sampling probe cleaning wire has a solid stainless steel construction that provides added strength and works well with auto sampler probes. Application: For Autosampler Probe, For AS-90/90A/90plus/91/93plus/S10 autosamplers This product is only available to U.S. Domestic…

Barrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Organics, for PinAAcle 900 This product is only available to U.S. Domestic…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For…

The Agilent Technologies corkpreen burner system gasket is ideal for burner end cap organics. It is suitable for AAnalyst 100/200/300/400/700/800 and PerkinElmer instruments. Application: For Burner End Cap Organics, for AAnalyst 100/200/300/400/700/800, PerkinElmer This product is only…

Agilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For End…

Agilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For…

The Agilent Technologies 1B connector with nipples is compatible to use with 2.4 to 3.2 mm OD tubing. Application: For 2.4 to 3.2 mm id Tubes, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use…

A range of rinse reservoirs and other autosampler supplies are available to upgrade probe rinsing capacity, giving you flexibility to improve the capabilities of the autosamplers used in your lab. Application: For SPS 3 Autosampler, Secures Transfer Tubing From Probe to Instrument on Arm of Probe…

The Agilent Technologies carousel & dust cover PSD-120 kit is suitable for use with chromatography or spectrometry system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent sampling probe is equivalent to the PerkinElmer AA version and is suitable for use with PerkinElmer AS-90/90A/90plus/91/93plus/S10 Autosamplers. Application: For inOrganic Acids & Most Organic Solvents, Except NMP This product is only available to U.S. Domestic Customers. For…

The Agilent Technologies PCI GPIB-IEEE (National Instruments) interface card is suitable for use with PCs and workstations with PCI expansion slots. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies HGA pyrocoated graphite tube is suitable for HGA 300/600/700/800/850/900 furnaces and PerkinElmer GFAAS systems. Application: For HGA 300/600/700/800/850/900 Furnaces, PerkinElmer GFAAS Systems This product is only available to U.S. Domestic Customers. For…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Barrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…

Agilent adapters with internal thread, adapters with external thread, and connectors for PerkinElmer FIMS/FIAS systems are equivalent to genuine adapters and connectors for PerkinElmer FIMS/FIAS systems. You can be confident that these adapters will integrate seamlessly with your PerkinElmer…

The Agilent Technologies 0.6 mm sampling probe is made from epoxy polymer for durability and the PTFE lining on the surface provides good corrosion resistance. Application: For AS-90/90A/90 Plus/91/93 Plus Autosamplers. Suitable for InOrganic Acids & Most Organic Solvents, Except NMP This…

Impact bead, for high-sensitivity nebulizer with Pt/Ir capillary, for PinAAcle and AAnalyst 100/200/300/400/700/800. Application: For High-Sensitivity Nebulizer with Pt/Ir Capillary, for Pinaacle & AAnalyst 100/200/300/400/700/800 This product is only available to U.S. Domestic Customers. …