Separatory Funnels, Funnels, Supplies
-
KIMAX Squibb Separatory Funnels With Plastic Stopper
DWK Life Sciences (Kimble)With Teflon ® stopcock plug Standard Taper ground neck has solid plug stopper of high-density polyethylene Designed for Federal Specification NNN-F-800
-
KONTES® Non-Vortexing Separatory Funnels
DWK Life Sciences (Kimble)These separatory funnels prevent the vortexing of liquids during phase separation. The funnels are designed with an internal baffle plate to divert the liquids being separated from vortexing and then remixing The funnels are supplied with PTFE stopcocks and Standard Taper 29/42 center…
-
Glass Separatory Funnels
GSC International, Inc.These Separatory Funnels are made from quality borosilicate glass, and come with a glass stopcock. They are commonly used in liquid-based extractions to separate the parts of the mixture into two solvent phases of different densities. PRODUCT WARNINGS WARNING: This product can expose…
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
-
Globe KIMAX® Separatory Funnels with PTFE Stopcock
DWK Life Sciences (Kimble)KIMAX® funnel is supplied with a Standard Taper ground glass stopper and a PTFE stopcock Gradually tapering shoulders and a wide neck facilitate cleaning Sharp separations are provided for by a narrow bore in the body just above the stopcock Replacement stopper is 850100 Replacement…
-
Sibata Glass Separatory Funnel
Vee Gee ScientificSibata Glass Separatory Funnels Feature smooth tooled tips, white block letters and marking squares Supplied with PTFE stopcocks to eliminate freezing and lubricant contamination Made from high-quality borosilicate tubing with a low coefficient of expansion
-
Ungraduated Addition Funnels
DWK Life Sciences (Kimble)Cylindrical funnel has a PTFE stopcock and a glass hex head stopper 633031 is supplied without a stopper Standard Taper bottom joint is 24/40 with a drip tip Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Squibb style separatory funnel with a glass stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…
-
Autoclavable plastic separating funnel Excellent clarity and strength Leak-proof threaded screwcap This durable polypropylene separating funnel is a fantastic alternative to the fragile glass lab ware that so often finds itself in pieces on the counter or floor. It has a threaded,…
-
These replacement 125mL PYREX® glass separatory funnels have inner and outer 19/22 Standard Taper joints. They require Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcock plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For…
-
Glass stopcock and glass stopper Stem length of 65 mm
-
Glass Seperatory Funnel
United Scientific SuppliesSeparatory Funnel, conical Shape with PTFE Stopcock and Plastic Stopper.
-
These 4L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 8 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For…
-
Nalgene™ FEP Separatory Funnels with Closure
Thermo Scientific NalgeneFunnel can be autoclaved; stopcock can be chemically sterilized. No stopcock lubrication needed. So transparent that phase interface is visible down to the stopcock and nonwetting surface—enhances complete drainage Break-resistant and impervious to any chemical used in a separatory…
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length PTFE stopper. See CG-3020-A for replacement stoppers.
-
KONTES® Squibb Separatory Funnels with Glass Stopcocks
DWK Life Sciences (Kimble)Squibb-type with Standard Taper joint and stopcock Plain stem, but may be used with a 179800 adapter. Note stem diameter for a proper fit when using this adapter Replacement stoppers are 850100 series 636010 series is supplied without a stopper Plug is 801001 Manufactured from 33…
-
-
Funnel 500 ml Cs4
CorningThese 500mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and a strong, lightweight No. 27 Standard Taper glass stopper. The PTFE plug fits into the micro-finish barrel …
-
Similar to CG-1728, but graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line. Supplied complete with listed size stopper. For replacement stoppers see CG-3018. Dimensions are the same as CG-1726.
-
These 125mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination.
-
Funnel 125 ml
CorningThese 125mL PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow No. 22 Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.
-
Squibb shaped separatory blank complete with tooled and finished ground stopper neck top. Lower portion of blank is unfinished and requires a stopcock to be sealed. NOTE: SUPPLIED WITHOUT STOPPER.
-
Utilizes PVC-coated borosilicate glass, which helps contain glass and contents should breakage occur Chemically and thermally resistant Excellent optical clarity Mechanically durable Autoclavable or microwaveable at 121°C (250°F)
-
PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…
-
Funnel Separatory, Safety
Ace GlassThe safest separatory funnel available, our 7247 funnel features a plastic coating, a removable PTFE drip tip and pressure relief rodaviss threaded cap and stopper. Common accidents involving separatory funnels are breaking the glass drip leaving a jag
-
Separatory Funnels, Squibb, Pear-Shaped, Standard Taper Stopper, with Totally…
DWK Life Sciences (Kimble)KimCote® plastic-coated funnel is supplied with a standard taper ground glass stopper and a totally autoclavable PTFE stopcock plug. Lower stems have an I.D. large enough so that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation and eliminating the…
-
Funnel 30 ml
CorningThese 30mL PYREX® pear-shaped separatory funnels have glass No. 2 Standard Taper stopcocks and strong, hollow No. 9 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.
-
KIMAX Squibb Separatory Funnels With Glass Stopper
DWK Life Sciences (Kimble)Supplied with a round glass stopper and a PTFE stopcock plug Lower stems have an i.d. that allows for more complete seperation and eliminates the necessity of emptying the funnel
-
-
Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination
-
SYNTHWARE Separatory Funnels with Squibb Glass Stopcocks
Kemtech AmericaSeparatory Funnel, Squibb, Glass Stopcock, Synthware, Capacity: 30-1000mL available, Stopper Size: #13, #16, #22, or #27, Stopcock Bore: 2 or 4mm, Supplied with flask length glass stopper.