Teflon® FEP Bottles RCF to 4,000 x g Withstand temperatures from -100° to +150°C Flat bottoms Autoclavable bottles have an 80% capacity (approx. 200 mL) in refrigerated centrifuges. Bottles include 38 mm Tefzel® ETFE screw caps. Dimensions (o.d. x H, mm): 62 x 122.

For 5804, 5804 R, 5810 and 5810 R Eppendorf Multipurpose centrifuges PCR strip rotor serves all models New rotors expand the versatility of the 5800 series For a variety of applications and capacities PCR TUBE STRIP ROTOR (For models 5804, 5804 R, 5810, 5810 R) spins 6 x 8 PCR…

Accessory for use with Eppendorf® centrifuge, model 5702. Round bucket centrifuge tube adapter for 25 mL tubes, round bottom for use with rotor model A-4-38. Pack of 2

The Labnet tank assembly is made of durable materials and meet all your laboratory requirements.

This Eppendorf 0.2 mL adapter is for all fixed-angle rotors for PCR and reaction tubes PCR tube size: 0.2 mL; diameter of adapter bore: 6mm Bottom of Form 7.4cm Rotor radius Adapter is autoclavable (121 degrees C, 20 minutes) 0.2 mL tube size

The Labnet fuse measuring 5 x 20 mm, has electrical rating of 125 V and 7 A.

Maximum speed: 3,486 x g (4,500 rpm) For use in Models 5810 and 5810 R only Rotor can handle up to – 2 x 5 MTP – 2 x 4 Cell culture plates – 2 x 2 DWP – 2 x 1 Filtration plate kits Maximum loading height of 60 mm Aerosol-tight lids2 for all applications involving…

The Labnet motor board assembly is highly efficient and easy to use.

The Labnet 0.4 mL individual tube adapter is made of durable materials and meet all your laboratory requirements.

Centrifuge tubes are used to hold various liquid mixtures or liquids containing suspended solids so that they can be spun and separated in a centrifuge. Our tubes are made of polypropylene, are graduated, come in a neutral color, and have a frosted writing area. The 15ml and 50ml tubes are…

Thomas No. 1203T19 RevSpin rotor replacement for RS-102, RS-150, RS-200. Standard (1.5mL or 2.0mL) 16 tube laminal rotor. Thomas No. 1203T20 RevSpin PCR strip rotor (0.2ml) replacement for RS-102, RS-150, RS-200.

Rotor for 0.2ml strip tubes or individual 0.2 ml tubes Shipping dimensions: 13 x 13 x 13 cm (5 x 5 x 5 in)

The Thermo Scientific replacement seal rings and lubricant is suitable for use with Sorvall™ stratos centrifuge models.

Process samples up to 100mL with the six-place capacity Thermo Scientific™ Fiberlite™ F15-6 x 100y Fixed-Angle Rotor. Reduced run-times with higher G-forces achieved with lightweight carbon fiber rotors Corrosion-and fatigue-resistant design that ensures structural integrity …

Adapter for Mini Plate Spinner C1000. The Mini Plate Spinner C1000 is 75% smaller than most plate centrifuges and accepts skirted, non-skirted and all standard PCR plates. Quickly spins down droplets and condensation. Use before and after thermal cycling to improve PCR yield. Support: 8 x…

Fixed-angle rotor for up to 6 x 250 mL bottles 1 Ideal for the pelleting of microorganisms and mammalian cells 12 different adapters for broad range of additional applications Max. speed 15,054xg (10,100 rpm) Eppendorf QuickLock rotor lid for fast lid locking Aerosol-tight 2 for…

The centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate. Holder accommodates up to eight 50 mL glass centrifuge tubes and test tubes up to 28 mm diameter, 140-180 mm long (stoppered) Up to 2 holders can be shaken at once …

For Eppendorf multi-purpose centrifuge models 5810 and 5810R Maximum capacity 4 x 400 mL Maximum speed 4,000 rpm Variety of adapters and capacities available Super high-capacity swing bucket rotor with wide speed range and choice of rotors provides maximum application versatility…

These Eppendorf A-4-62 rectangular replacement buckets for swing-bucket rotors are used with centrifuge models 5810 or 5810 R. Packaged in sets of four Autoclavable at 121 degrees C for up to 20 minutes Bucket Capacity: 250 mL This set of replacement buckets is an accessory…

With state-of the art digital brushless technology, the Denville 260D provides all the most requested features in a single afforable microcentrifuge. The 260D may be used in a cold room and its autoclavable rotorshave a clear cover that "snaps" on or off easily with one hand. The 45 degree angle…

Rotor, Replacement for 6 x 1.5 mL Shipping Dimensions: 13 x 13 x 13 cm ( 5 x 5 x 5 in.)

1227M85: The Thermo Scientific 6 x 50mL Fixed-Angle Highconic Rotor provides six-place flexible capacity. Unique 45° angle design enhances pelletization and reduces processing time in conical cell culture tubes. Separates sample at bottom of tube, rather than on walls, to produce a compact…

Four-place swinging bucket tube adapters for A-4-62 swing bucket rotor. For use with 5810/5810R centrifuges Maximum 25 tubes/adapter Capacity: 1.2 to 5mL tubes Pack of 2

Rotor Lid for TX-400 Round Bucket (1224A46) . ClickSeal® biocontainment lid Set of 4

Increase lab productivity with the Thermo Scientific™ TX-750 4 x 750mL Swinging Bucket Rotor, delivering maximum flexibility at 4700rpm. Buckets, lids and microplate carriers are sold separately; order TX-750 rotor body (75003180) and components to complete assembly. Tube adapters are…