Water Quality, Supplies
-
Nitrite VACUettes Kit, Range: 0-80 ppm
CHEMetricsNitrite, an intermediate in the nitrogen cycle, is formed during the decomposition of organic matter but readily oxidizes to form nitrate. These processes occur in wastewater treatment plants, water distribution systems, and natural waters. Nitrites are useful as corrosion inhibitors,…
-
-
The Insta-Test Low Range Hydrogen Peroxide Test Strips is a convenient way to quickly measure peroxide levels in water with fast dip and read results. Range and sensitivity is 0, 1, 3, 10, 30, 50 ppm. Applications: Drinking Water, Industrial Water Boiling and Cooling, Laundry…
-
Spectroquant® Chloride Test Method: photometric
MilliporeSigmaPrecautionary Statement(s): P273: Avoid release to the environment. P280: Wear protective gloves/ protective clothing. P302 + P352: IF ON SKIN: Wash with plenty of soap and water. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if…
-
QUANTOFIX Carbonate Hardness-100 strips
MACHEREY-NAGELQUANTOFIX Carbonate alkalinity semi-quantitative test strips for the determination of the carbonate hardness. (Strong bases -or other acid-consuming substances cause false results.) Measuring range: 0-3.8-7.5-12.5-18.8-25.0 °e
-
This kit tests for nitrate nitrogen using tablet reagents and the Octa-Slide 2 Comparator. Range/sensitivity is 0, 1, 2, 4, 6, 8, 10, 15 ppm NO3 - -N Applications: Drinking Water, Environmental Education, Food and Beverage, Industrial Water Boiling and Cooling,…
-
Hardness Test Kits
LaMotteDirect Reading Titrator (9859X42 and X43) For determining total hardness of water Range 0 to 200 ppm as CaCO3 in 4 ppm increments Titrators may be refilled to test higher concentrations Sufficient for 50 tests at 200 ppm Direct Reading Titrator (9859X72 and X73) For…
-
Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…
-
Quant® Strips-Ion Selective Colorimetric Test Strips
MilliporeSigmaFor detection and semi-quantitative determination of cations and anions in solution Furnished in aluminum vials with plastic snap cap Desiccant pack is provided inside cap Each strip contains reagents, buffers and masking chemicals necessary to perform the test. All but sulfate…
-
-
Chlorine Test Strips
LaMotteTests 0-5 ppm Five intervals: 0, 0.5, 1, 3 and 5 50 strips per vial Unique range and sensitivity covers critical chlorine concentrations for many applications of food processing, water/wastewater treatment, education and other areas.
-
Range: 0.5 to 14mg/L Parameter: Nitrate Method: 2,6 Dimethylphenole For use in test kits, colorimeters and spectrophotometers Case of 24 Manufacturer Part No: LOV-2420702
-
No color matching, no look up charts, no guessing! The unique, multi-test ColorQ pool and spa hand-held photometer reads SEVEN test factors (Free Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Calcium Hardness, and Cyanuric Acid) directly on a digital display. Featuring an innovative…
-
Chlorine Test Kit
LaMotteThis Chlorine test kit measures for Chlorine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl. Applications: Drinking Water, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater # Tests (# Rgts): 50 at 10…
-
Water Purification System Accessories
CHEMetricsThe CHEMetrics accessory is suitable for use with water purification system, which ensures best water quality by resisting airborne contaminants. This accessory is carefully designed with durable construction to ensure optimum performance.
-
pH Test Kits
LaMotteWide Range Octet Comparator Method Employ Octet Comparator having eight color standards in increments of 5.0 or 1.0 pH unit, as indicated in listings below Kits are offered covering ranges from pH 3.0-10.0 to pH 8.5-12.0 For each pH range, two kits are offered: one without and one…
-
Chlorine Free Micro Test Strips
HF ScientificThe Micro Check Test Strips are an accurate, inexpensive and safe alternative for reagent chlorine testing. Quick, accurate and easy to use results are achieved in under 1 minute. Free Chlorine with sensitivity as low as 0.05ppm (mg/L). Micro Check free, detection levels ppm (0, 0.1,…
-
Alkalinity Test Kits
LaMotteDirect Reading Titrator Method (9859A70 and A71) For determining total (T) alkalinity in water Range of 0 to 200 ppm as CaCO3 in 4 ppm increments Employs APHA Method 403. Sufficient for 50 tests at 200 ppm. Direct Reading Titrator (9859B10) For determining phenolphthalein (P)…
-
Insta-Test® PRO Phosphate
LaMotteInsta-Test® PRO Phospate strip measures the Phosphate levels from 0, 100, 200, 300, 500, 1000, and 2500 ppb in 15 seconds. The PRO Phosphate strips are packaged 50 strips per bottle in a 6-pack case.
-
Hardness is a measure of the mineral content of water. Calcium and magnesium are the most common minerals that contribute to hardness. Hard water causes scaling in boilers and other industrial equipment, and diminishes the effectiveness of soaps and detergents. The EGTA Method (Calcium) …
-
Spectroquant® Fluoride Test Method: photometric
MilliporeSigmaPrecautionary Statement(s): P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P240: Ground/bond container and receiving equipment. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.…
-
Waterworks Test Strips
Industrial Test SystemsDip and read No mixing sample and reagent Economical, quick results Patented tests are quick alternatives for food or environmental testing. Supplied in bottles of 50 loose strips or packages of individually wrapped strips Tests for lead and other heavy metals
-
All necessary reagents for the analysis are contained in the cells Considerate packaging design protects the cells from fluctuation even in unfavorable environment Elimination of possible mistakes through barcode-system
-
-
Spectroquant® Sulfite Test
MilliporeSigmaMethod: photometric 1.0 - 60.0 mg/l SO3² - 0.8 - 48.0 mg/l SO2
-
Paper Iodine Test 200 Tests
LaMotteThe Iodine test papers are a convenient way to test Iodine in water with fast results. Range and sensitivity is 0, 30, 60, 120, 180 ppm.
-
Phenols Vacu-vials® Kits
CHEMetricsPhenol (hydroxybenzene) is the simplest of a group of similar organic chemicals, which includes cresols, xylenols, and catechols. Phenol itself is a common ingredient of disinfectants. In drinking water, low-level phenolic concentrations impart a foul taste and odor, especially upon chlorination.…
-
R2A Agar
Hardy DiagnosticsR2A Agar is recommended for enumeration of heterotrophic bacteria in water, especially potable water. This product is not intended to be used for the diagnosis of human disease.
-
Nitrite CHEMets Kit, Range: 0-2.5 ppm
CHEMetricsNitrite, an intermediate in the nitrogen cycle, is formed during the decomposition of organic matter but readily oxidizes to form nitrate. These processes occur in wastewater treatment plants, water distribution systems, and natural waters. Nitrites are useful as corrosion inhibitors,…
-
Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…