Water Quality, Supplies
-
Chlorine Test Strips
LaMotteTests 0-5 ppm Five intervals: 0, 0.5, 1, 3 and 5 50 strips per vial Unique range and sensitivity covers critical chlorine concentrations for many applications of food processing, water/wastewater treatment, education and other areas.
-
Spectroquant® Iron Test Method: photometric
MilliporeSigmaPrecautionary Statement(s): P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P352: IF ON SKIN: Wash with plenty of soap and water. P304 + P340: IF INHALED: Remove victim to…
-
-
Cyantesmo Test Paper
MACHEREY-NAGELThis test paper allows the quick and easy detection of hydrocyanic acid and cyanides in aqueous solutions and extracts. They are for example formed in the manufacture of fruit brandies and are toxic even in low concentrations. To detect cyanides in solution, a drop of concentrated sulfuric acid is…
-
-
The Lovibond® aluminum no. 1/no. 2 combi-pack tablet set is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Water hardness is caused almost entirely by calcium and magnesium ions. Other di- and trizalent metals have a similar effect, but usually are not present in high enough concentration in potable waters to cause problems. Hardness increases soap consumption in laundries and causes scale in boilers. …
-
Spectroquant® COD Cell Test
MilliporeSigmaAll necessary reagents for the analysis are contained in the cells Considerate packaging design protects the cells from fluctuation even in unfavorable environment Elimination of possible mistakes through barcode-system
-
Iron (Total & Ferrous) Vacu-vials Kit
CHEMetricsIron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron…
-
UN Number: UN3316
-
-
Phosphate Vacu-vials® Kits
CHEMetricsPhosphorus occurs naturally in rock formations in the earth's crust, usually as phosphate. High phosphate concentrations in surface waters may indicate fertilizer runoff, domestic waste discharge, or the presence of industrial effluents or detergents. Although phosphates from these sources are…
-
Chlorine Dioxide Test Strip
LaMotteInsta-TEST® Chlorine Dioxide is a convenient way to test for Chlorine Dioxide levels in sanitized water. Range and sensitivity is 0, 10, 25, 50, 100, 250, 500 ppm. Range and sensitivity is 0, 0.25, 0.5, 1, 3, 10 ppm.
-
Ammonia Vacu-vials Kit, Range: 0-14.0 ppm
CHEMetricsLow-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries),…
-
Glycol CHEMets Kit
CHEMetricsEthylene glycol and propylene glycol are the primary ingredients in commercially-available antifreezes. They are used with various corrosion inhibitors to protect metal surfaces in cooling water systems. CHEMetrics glycol kits are used to monitor potable waters for glycol contamination…
-
QUANTOFIX Glucose - box of 100 strips
MACHEREY-NAGELQUANTOFIX Glucose semi-quantitative test strips for the determination of glucose content. Measuring range: 0-50-100-250-500- 1000-2000 mg/L glucose
-
Nitrite Sodium Kit
LaMotteThis kit tests for Sodium Nitrite using the Direct Reading Titrator method. Applications: Industrial Water Boiling and Cooling, Water and Wastewater Range/sensitivity is 0-1000 ppm/20 ppm NaNO2
-
Hydrazine CHEMets Kit
CHEMetricsHydrazine is a powerful reducing agent that is used in various chemical processes and in boiler water as an oxygen scavenger. To control corrosion, residual hydrazine typically is maintained in the 0.05 to 0.1 mg/L range. Higher levels may be used to guard against corrosion when the boiler is out…
-
-
WaterWorks™ Low Range Peroxide Check
Industrial Test SystemsSensafe® Low Range Peroxide Check is a break through in testing for Hydrogen Peroxide (H2O2). Utilizing ITS’ patented aperture technology, this strip allows for detection levels of 0.05, 0.3, 0.5, 1.0, 2.0, and 4.0 ppm, all in an easy dip and read procedure. Simply dip the patented…
-
Test Kit
CHEMetricsThe CHEMetrics peracetic acid CHEMets kit and peracetic acid comparator are used to determine various levels of peracetic acid in liquids. These are easy to use and ensure accurate testing. Application: For the Analysis of Peracetic Acid
-
Chlorine Test Kit
LaMotteThis Chlorine test kit measures for Chlorine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl. Applications: Drinking Water, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater # Tests (# Rgts): 50 at 10…
-
Arium Consumables & Accessories
SartoriusConsumables & accessories for Sartorius Arium laboratory water systems. Arium® Smart Station flexible remote dispenser Ultrapure Water for benchtop or wall-mounted installation. The Arium® Smart Station is designed for flexible remote dispensing of ultrapure water directly at the…
-
pH Test Kits
LaMotteWide Range Octet Comparator Method Employ Octet Comparator having eight color standards in increments of 5.0 or 1.0 pH unit, as indicated in listings below Kits are offered covering ranges from pH 3.0-10.0 to pH 8.5-12.0 For each pH range, two kits are offered: one without and one…
-
Spectroquant® Fluoride Cell Test
MilliporeSigmaMethod: photometric 0.10 - 1.80 mg/l F? Spectroquant® HS Code: 3822 00 00 Storage Class (GHS): 10 - 13 Other liquids and solids Storage: Store at +15°C to +25°C
-
VISOCOLOR PP Total Chlorine
MACHEREY-NAGELVISOCOLOR Powder Pillows total Chlorine reagent set for photometric determination of total chlorine. Ideal for pool or drinking water analysis. Measuring range: 0.03-6.00 mg/L Cl2
-
Iron Test Strips
HachIn domestic water supplies, iron can do great economic damage by staining laundry and porcelain fixtures and by producing an off taste in beverages. In water supplies used for commercial beverage production, low levels of iron are critical. Hach's test strips provide the most easily-used method for…
-
Protects water baths and other water systems against the growth of algae, bacteria, molds and biofilms. Just 2ml per liter of water adds a blue tint which will fade after about 3 months reminding you to change the water and add new conditioner. Protects pumps and thermostats and helps…
-
Detergent Test Kit
LaMotte4507 Drop Count Method For determining anionic forms of detergent One drop equals 1.0 ppm detergents; range approximately 0 to 5.0 ppm Sufficient for 60 tests at 5.0 ppm
-
Cadmium Test Kit
LaMotteOctet Comparator Method For determining cadmium in water using Dithizone method; commonly occurs from the deterioration of galvanized pipe Octet comparator has color standards representing 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0 ppm cadmium. For use only where organic matter is absent and…
-
Waterworks Test Strips
Industrial Test SystemsDip and read No mixing sample and reagent Economical, quick results Patented tests are quick alternatives for food or environmental testing. Supplied in bottles of 50 loose strips or packages of individually wrapped strips Tests for lead and other heavy metals