The Model SD Monitoring Kit was specifically designed and manufactured to meet US EPA requirements for field test procedures approved in the Federal Register (Volume 55, No. 217), to monitor illicit storm drain connections. Each unit includes tests for pH, Total Chlorine, Total Copper, Phenols,…

Octet Comparator For determining silica in natural and industrial waters Employs modified APHA Method 425D Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10.0 ppm silica Sufficient for 50 tests

The Cyanuric Acid (Stabilizer) test kit measures Cyanuric Acid levels at 20, 30, 40, 50, 60, 80 and 100 ppm. The kit includes 50 Cyanuric Acid visual grade TesTabs® tablets that are added to a test tube. Once the tablet disintegrates then the analyst would look down through the test tube and…

This kit tests for Nitrate in water using reagents to form a pink color. Results are determined using the Octa-Slide 2 Comparator Range/sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm NO₃ - -N

Contents: 30 mL Hydrogen Peroxide 3% 30 mL Chloride Reagent A 30 mL Sulfuric Acid, 0.5N 15 mL Phenolphthaein Indicator 0.5% 2 x 30 mL Silver Nitrate 0.171 N 1 Sample Tube, 5-10-25 mL w/ cap  

For determining potassium in natural waters and brine Turbidity tube is calibrated for 6, 8, 10, 20, 30, 40 and 50 ppm potassium Sufficient for 100 tests For replacement reagent, order 0534B49

Octet Comparator For determining total iron (dissolved, suspended and collodial) in natural waters Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10 ppm iron Bipyridyl indicator Sufficient for 100 tests Octet Comparator For determining trace…

Kit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer

Octa-Slide Comparator Tests total iron after any ferric iron is reduced to ferrous in the sample Sufficient for 90 tests Ferrous and ferric iron may be tested separately by eliminating the reduction step. Octa-Slide has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0…

DPD Tablet Octa-Slide (9859G42) Sufficient for 50 tests Employs DPD tablet method: EPA- accepted method for NPDWR Octa-Slide has color standards representing 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 and 3.0 ppm Cl Low Range Octet Comparator (9859H10) Employs DPD tablet…

Direct Reading Titrator For determining levels of sodium in natural and treated waters Range 0 to 500 ppm sodium in 10 ppm increments Test requires three titrations: one to determine bicarbonate and carbonate ions; one to determine sulfate and chloride ions; and one to determine calcium and…

This kit tests for nitrate nitrogen using tablet reagents and the Octa-Slide 2 Comparator. Range/sensitivity is 0, 1, 2, 4, 6, 8, 10, 15 ppm NO₃ - -N Applications: Drinking Water, Environmental Education, Food and Beverage, Industrial Water Boiling and Cooling,…

Applications: Food and Beverage, Environmental Education, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater This kit tests for nitrate or nitrite using the Octa-Slide 2 Comparator. Range/sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm…

Octet Comparator For detection of nickel in waste effluents and water supplies Employs dimethylglyoxime method Octet Comparator has color standards representing 0.5, 1.0, 2.0, 4.0, 5.0, 7.5, and 10.0 ppm nickel Sufficient for 20 tests

EPA-accepted method for NPDWR and NPDES Employs modified APHA Argentometric method Range of 0 to 50 ppm Cl in 1 ppm increments Sufficient for 50 tests Range of 0 to 200 ppm Cl in 4 ppm increments Sufficient for 50 tests at 200 ppm Employs Argentometric method

4790 OctaSlide Comparator For determining Diethylhydroxylamine (DEHA) concentrations by way of iron reduction method Octa-Slide comparator provides 8 standards between 0.05-1.5 ppm Three reagents perform 100 tests

3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…

The LaMotte 0.04% pH bromothymol blue indicator solution is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

Applications: Drinking Water, Industrial Water Boiling and Cooling, Water and Wastewater This Alkalinity Test Kits uses a Direct Reading Titrator with standard acid to the phenolphthalein (P) and/or total (T) alkalinity endpoint. Range and sensitivity is 0–200 ppm as CaCO3 in 4 ppm…

Octet Comparator Method (9859C70 and C71) For determining ammonia nitrogen in water using Nessler method Octet Comparator has color standards representing 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0 and 8.0 ppm ammonia nitrogen Sufficient for 50 tests Octa-Slide Comparator Method…

3114 Mid-Range Octet Comparator For determining orthophosphates in water Employs ascorbic acid reduction method Octet Comparator has color standards representing 0.5, 1, 2, 3, 4, 6, 8 and 10 ppm phosphate Sufficient for 50 tests

The ColorQ Pool 4 measures four basic pool and spa tests, Free Chlorine (0 to 10 ppm); Total Chlorine (0 to 10 ppm); Bromine (0 to 22 ppm) and pH (6.5 to 8.5 pH). As a bonus, the ColorQ Pool 4 can also measure Total Alkalinity (Code 7038-G), Calcium Hardness (Code 7041-G and 7042-G), and Cyanuric…

The LaMotte 30 mL sample bottle with flip top is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is made of sturdy plastic material which ensures long lasting usage.

The LaMotte 0 - 15 ppm ColorQ nitrate TesTabs are suitable for use with ColorQ and ColorQ 2x test kits. They are mainly used in research facilities and chemical laboratories to conduct wide range of experiments. They are easy and convenient to use.

Applications: Laundry and Sanitation This kit tests for caustic levels by adding drops of Barium Chloride solution to a sample where white precipitate will form if carbonates are present. Levels are then determined using the Phenolphthalein Indicator. Range and sensitivity is 1 drop = 0.1 or…

This kit tests for Calcium and magnesium hardness by using the Dropper Bottle method. All results are as CaCO₃. Range/sensitivity is 1 drop = 10 ppm or 1 gpg CaCO₃. Applications: Industrial Water Boiling and Cooling, Water and Wastewater # Tests (# Rgts): 50 at 200…

This LaMotte Phosphate test kit tests for low range Phosphate using the LRC Comparator. Range and sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 ppm PO43-. Applications: Environmental Education

LaMotte introduces the new BrewLab® Pro water analysis kit. Designed with the professional brewer in mind, this kit measures 11 test factors which are important in the brewing process. Water is the most important ingredient for any brewer. The BrewLab® Pro helps you to make your best craft…

The LaMotte 0-15 ppm (CTA) octa-slide 2 bar is suitable for use with nitrate nitrogen test kit. It is mainly used in food and beverage, environmental education, industrial water boiling, laundry, sanitation, water and wastewater applications.

No. 7436-01 Determines corrosion conditions in water supplies which can introduce lead and heavy metals Supports a water supplier’s lead abatement program in drinking water Includes TDS pocket tester to meet EPA requirements for corrosion testing Packaged in a portable…

Applications: Industrial Water Boiling and Cooling This test kit measures for Chlorine or Bromine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl or Br.