Removes all traces of oil Air pressure drives solvent No electrical contact needed Unit is designed to wash the inside of glass kinematic viscometer tubes with a jet of solvent. At the touch of a button, the solvent stream is cut off and an air jet is directed into the tubes for…

Yields accurate kinematic viscosity data quickly and easily using the Alphabetical Comparison Method (upward speed of a trapped air bubble) Conforms to ASTM D 1131, D 1545 and D 1725 Standard tubes easily identified by large letters Quick and easy cleaning Viscosity of the liquid sealed in…

CT-500 Temperature range 20° to 100°C Easy temperature setting Precise solid state temperature control within 0.01°C Multiple safety features The top cover contains seven round holes 51 mm (2") in diameter. Each unit maintains accurate temperature control of 0.01°C within the range of…

Programs are supplied on a 3.5” disk. The programs are designed to be user-friendly (they are accessed through a convenient menu system) and are provided with a detailed operator’s manual. The calculations performed include the following: Blending of oils- the W.A. Wright…

Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil Compact and easy to use Rapid results Inexpensive Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or less. Five cups are available differing only in the…

For glass capillary viscometers and other instruments requiring precise low temperature control All-digital, LCD displayed, microprocessor-controlled temperature regulation; Cooled thermoelectrically (solid state heat pump) Temperature range: -30°C to +30°C °C/°F…

Made of polished stainless steel Looped handle and finger ring Calibrated with Cannon viscosity standards traceable to NIST; Cannon standards are produced in accordance with ISO 90002 Each cup is furnished with the mathematical formula for calculating the viscosity in centistokes…

Wide temperature range 20°C to 150°C Easy temperature setting Insulated for precise solid-state temperature control Multiple safety features Ideal for temperature control of other instruments which must be viewed while immersed in a constant temperature bath. The top…

Calibrated viscometers For measurement of kinematic viscosity of transparent and opaque Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Also used to measure kinematic viscosity of cut-back asphalts and road oils at 140°F and asphalt…

For both laboratory and field use Aluminum cup and brass orifice Calibrated cups are calibrated to within 2% accuracy Ideal for measuring low viscosity liquids Results are expressed as time in seconds for the liquid to flow through the orifice until the first break in the…

Automatic timing option for simplified, accurate measurement of efflux times Microprocessor controls temperature between ambient and 240°C (464°F) Four-tube capacity Dual digital displays show setpoint and actual temperature °C/°F selectable Conforms to ASTM…

Very small sample size: The SV-1A requires a sample volume of only 2ml (SV-10A: 10ml or more) so users do not waste any samples and can save costs. Titanium sensor plates: Anti-corrosive, titanium (JIS Class 2) sensor plates, which are resistant to chemical substances X-Y-Z stage: Fine…

Developed for a wide range of applications, ViscoQC 300 ensures the quality of your substance – from almost any fluid to semi-solid samples – by delivering fully traceable viscosity results with a Peltier device for the most precise sample temperature control – right at your…

The Quick Connector enables the spindles to be connected directly to the ROTAVISC measuring System. Consisting of: 1x coupling to the ROTAVISC 6x adapter for the spindles

Calibrated Viscometers For measurement of kinematic viscosity of small samples of transparent Newtonian liquids, particularly petroleum products or lubricants Meets ASTM D 445 requirements Precision: ±0.2% Specifications conform with ASTM Standard D 446. Minimum sample…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume:10 mL. Requires liquid bath depth of 230 mm (9”). Includes certificate of…

The BH 600 clamp is suitable for 600 ml beakers. It fixes them, for example, to an IB R 9 or IB R 20 plastic bath.

The extremely low viscosity adapter spindle set ELVAS-1 includes a double jacket to quickly heat up or cool down the sample as well as a coaxial cylinder system for the analysis of the sample at a specific shear rate and shear stress. This 16 ml spindle is commonly used with the ROTAVISC lo-vi and…

With three or four manual valves for applying vacuum or pressure to capillary-type viscometers Designed for use with 9726T20 through 9726T67 Vacuum Regulators and Cannon-Manning, Asphalt Institute or Modified Koppers vacuum viscometers (see Thomas number 9724H50) Integral brackets permit…

Four Bulb Shear Dilution- Five-fold Dilution Type, Cannon CUSDC-11 Series For measurement of intrinsic viscosities extrapolated to zero shear rate Provides five-fold range of shear rates Design gives extra mechanical strength Negligible kinetic energy correction Precision:…

Uncalibrated and Calibrated Viscometers Suspended level viscometer for measurement of kinematic viscosity of transparent Newtonian liquids Also used for evaluating jet fuels and hydraulic fluids Meets ASTM D 445 and D 446, as well as ISO 3104 and 3105 requirements Suitable for use at…

All Cannon viscometer holders are designed to fit holes 51 mm (2 in.) in diameter. Rubber holders are made of neoprene rubber.  Plastic holders hold the viscometer firmly with a spring clip.  Metal holders are constructed of chrome-plated machined brass.  A handle permits…

Ideal for kinematic viscosity determinations between 10°C and 30°C Built-in thermoelectric cooling provides “rock-solid” temperature control at ambient and below Meets ASTM D 445 precision specifications from 10°C to 100°C The Cannon CT-600 has many of the engineering and control features of…

Used in ASTM Method D 1601. A test for Dilute Solution Viscosity of Ethylene Polymers at 130 degree C. It is applicable to a reasonably wide spectrum of ethylene polymers having densities from 0.913 to 0.970g/cc. Available in capillary sizes .6, .7, and .8mm.

Viscometer with revolutionary range & technology - Redefining standard viscosity determination. Advanced vibrating tuning fork technology works on a wide range of Newtonian Fluids. Provide fast accurate results and it is simple to use. Advanced benefits in difficult sample with low & high…

The bubble viscometers can be ordered individually to create a custom set. Economically priced Compliant with ASTM methods D1131, D1545, D1725

Anton Paar’s air-counter-cooled Peltier temperature device PTD 80 for the rotational viscometers ViscoQC 100/300 not only saves space in the laboratory but also provides fast and highly accurate sample temperature control from +15 °C to +80 °C. Anton Paar products are intended for…

Inexpensive, compact source of low-level pressure and vacuum Fused circuit and grounded plug ensure safe operation Multiple fittings kit and polyurethane tubing are provided Oilless diaphragm pump operates quietly to produce a continuous pressure of 35 psi or an adjustable,…

ViscoQC 100 is designed to bring simplicity to your daily operation for single-point viscosity determination. Unrivaled user experience is ensured by its automatic spindle detection with magnetic coupling. Save your time when searching a speed to measure an unknown sample, as ViscoQC 100…

Calibrated viscometers For measuring viscosity of asphalt at 60°C (140°F) Meets ASTM Standard D 2171 Applicable to materials with viscosity range of 42 to 200,000 poises. Two-piece design, with sample reservoir and calibrated capillary Vacuum of 300 mm Hg must be applied to top of capillary…

Contains an oxidation inhibitor which reduces tendency to darken at higher temperatures For use below 135°C (275°F) For higher temperature requirements, see Thomas number 6428R25.

Tapered from 6 mm top diameter to 2 mm bottom diameter, these solid rubber micro stoppers measure 20 mm long. Micro stoppers are for use with Cannon-Fenske Qpaque Viscometer and Cannon Cold-Cranking Simulator.