MilliporeSigma Chromatography Vials
-
These vials provide the advantage of a sealed ampule with the flexibility of a screw cap bottle or a septum vial. These unique, screw-cap sample containers with a 1.2 x 28mm height capillary opening are designed for the storage of volatile samples and reference standards. Advantages: •No…
-
Vials, screw top
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type.
-
Short thread screw cap
MilliporeSigmaShort thread screw cap, 9 mm thread, with liner are suitable for use with short thread (11.6 X 32 mm) autosampler vials (9 mm thread). The PTFE/rubber septa are compatible with most organic solvents until pierced and are not recommended for aromatics, carbon disulfides, chlorinated solvents,…
-
Standard screw-thread autosampler vials
MilliporeSigmaConstructed of borosilicate glass. Vials use 8mm septa and screw-caps
-
Septa
MilliporeSigmaVial septa are available in a variety of materials. Septa, tan PTFE/silicone (diam. x thickness 8 mm x 1.5 mm) are sized to fit screw top vials. They are suitable for use with most organics (until pierced) and are not recommended for use with chlorosilanes.
-
Headspace vial, clear glass, beveled top
MilliporeSigmaLegal Information: PerkinElmer is a registered trademark of PerkinElmer Inc.
-
Vials, screw top
MilliporeSigmaVials, clear glass (1.5mL) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.
-
Short thread autosampler vial
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. Only the following insert part numbers are compatible with these large opening vials. •SU860067 PK100 0.1ML GLASS CONICAL INSERT, 6 X 31MM •854988 PK1000 0.1ML GLASS CONICAL INSERT, 6 X 31MM •SU860066 PK100 0.1ML GLASS CONICAL…
-
Screw cap, solid top
MilliporeSigmaScrew caps are available as solid caps with aluminum liner. Caps are made from phenolic resin. Solid phenolic caps can withstand a maximum temperature of 205 C.
-
Wheaton sample vials with rubber lined caps
MilliporeSigmaCaps have white styrene-butadiene rubber liner and are packed in Lab-File® cases. Clear Wheaton-33, low extractable borosilicate glass or amber Wheaton-320 glass. Can be sterilized and stored at low temperatures. Legal Information: Lab File is a registered trademark of Wheaton Industries, Inc.
-
Headspace vial, screw top, rounded bottom
MilliporeSigmaThese vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…
-
Mininert® Valve, screw thread
MilliporeSigmaThese valves are very easy to use. 1. Push the green button to open the valve2. Insert the needle through the septum and take sample3. Remove the needle and push to close Benefits include: •PTFE construction for inertness. PTFE is useful when working when acids and organic solvents. •Good sealing…
-
Vial crimp seals, BiMetal (magnetic)
MilliporeSigmaThe BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…
-
Vials, screw top
MilliporeSigmaVials are suitable basically to inject samples from an autosampler. They are available in various sizes, although 2 mL vials are more commonly used. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Application: It has been…
-
Septa, Blue PTFE/white silicone
MilliporeSigmaApplication: Septa, blue PTFE/white silicone (blue PTFE/white silicone) has been used as a part of injection port in the gas chromatographic (GC) analysis of nitrous oxide, methane and carbon-dioxide gases in soil samples subjected to irrigation.
-
Vials, screw top
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type. Other Notes: 27269 --> material nos. 27269 (100pk) & 27270-U (1000pk).
-
Vials Inserts
MilliporeSigmaMicro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. Vial inserts (volume 0.15 mL, glass insert (with bottom spring), O.D. x H 6 mm x 38 mm) allow the use of smaller sample volumes with standard autosampler vials.…
-
Amber storage bottles
MilliporeSigmaAmber storage bottles (volume 120 mL, O.D. x H 49 mm x 114 mm, thread 22-400, bottle only) are primarily used to protect the stored sample from sunlight. Oxidation of various oils is prevented when packaged in amber glass bottles. Synonyms: AMBER SCREW-CAP BOTTLE ONLY 120ML PK12
-
Space Saver storage racks
MilliporeSigmaEconomical and convenient storage for samples in your screw cap and crimp seal vials. Can be stacked when empty or full. Autoclavable, 120C. Each case contains 5 racks. Synonyms: VIAL RACK,40ML EPA VIAL, 5/CS Legal Information: WHEATON is a registered trademark of Wheaton Industries, Inc.
-
Liquid scintillation vials
MilliporeSigmaAutoclavable, easy to maintain. A vial is used to store or as a closure type,in order to prevent contamination.
-
-
Insert for 2 mL standard opening vial
MilliporeSigmaVial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.
-
Inserts for 2 mL large opening vials
MilliporeSigmaInsert fits 12 x 32 mm vials with large opening (6.0 mm) Application: It may be used to contain albumin standard solution in an absolute quantification method like protein hydrolysis, o-phthalaldehyde derivatization, and reversed-phase high-performance liquid chromatography analysis in a…
-
Wheaton sample vials with rubber lined caps
MilliporeSigmaCaps have white styrene-butadiene rubber liner and are packed in Lab-File® cases. Clear Wheaton-33, low extractable borosilicate glass or amber Wheaton-320 glass. Can be sterilized and stored at low temperatures. Legal Information: Lab File is a registered trademark of Wheaton Industries, Inc.
-
Vials, crimp top
MilliporeSigmaThese vials are constructed of clear, borosilicate glass; closure not included.
-
Certified screw thread vials, 10-425 thread
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…
-
-
Screw cap
MilliporeSigmaGreen Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…
-
Insert for 2 mL standard opening vial
MilliporeSigmaGlass conical inserts with polymer feet are basically used to contain standard mixtures for various experimental purposes. Application: It may be used to contain albumin standard solution in an absolute quantification method like protein hydrolysis, o-phthalaldehyde derivatization, and…
-
Vials
MilliporeSigmaVials (volume 2 mL, amber glass vial, thread 8-425) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Amber glass protects sensitive samples from exposure to UV…
-
Vials, screw top with solid green Thermoset cap
MilliporeSigmaSynonyms: PK100 2ML AMBER VIAL,SCREW TOP, SOLID CAP W/PTFE LINER
-
Headspace vial, screw top, rounded bottom
MilliporeSigmaThese vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…