Legal Information: Snap Seal is a trademark of J.G. Finneran Associates, Inc.

Crimp seals, 11 mm, with PTFE/rubber septa are for use with 12 x 32 mm crimp top vials. The PTFE/rubber septa are compatible with most organic solvents until pierced and are not recommended for aromatics, carbon disulfides, chlorinated solvents, hydrocarbons.

Economical and convenient storage for samples in your screw cap and crimp seal vials. Can be stacked when empty or full. Autoclavable, 120C. Each case contains 5 racks. Synonyms: VIAL RACK,40ML EPA VIAL, 5/CS Legal Information: WHEATON is a registered trademark of Wheaton Industries, Inc.

Application: Septa, tan PTFE/silicone may be used in headspace solid-phase microextraction (SPME) (lyophilized aqueous extract).

Screw caps [for use with 2 mL vial (standard opening), thread 8-425] are available for use with sealing septa and solid caps with aluminum liners. Caps are offered in solid phenolic caps that can withstand a maximum temperature of 135 C.

These vials are constructed of clear, borosilicate glass; closure not included.

Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type. Other Notes: 27269 --> material nos. 27269 (100pk) & 27270-U (1000pk).

The Supelco hand held crimper provides a consistent and dependable seal that allows secure vial closure each and evey time. The high quality construction is engineered for durability and long life to provide a smooth and simple operation.

Wheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.

Legal Information: QSertVial is a trademark of QIS, Inc.

Legal Information: QSertVial is a trademark of QIS, Inc.

Application: Septa may be used in headspace solid-phase microextraction (SPME) (lyophilized aqueous extract).

VIALS TAKING 11mm SNAP TOP SEALSLARGE OPENING, 12 x 32mmUse with:Agilent / HP 7673 series I/II,7670A, 7671A, 1042, 1090,8042, 1050, 1082, 1080, 1084AIM CPS-200A.I. (42 vial tray)Alcott 738AltexAMS 42Antek 736ASCBeckman 501, 507Carlo Erba AS V42, AS 105Carnegie CMA 230/200ChrompackDani 39.80, ALS…

Vials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials are used on many autosamplers. They are made from clear glass and include graduations. …

PTFE/Silicone is recommended for use with most organic solvents until PTFE is pierced. It has good resealability and can withstand a temperature of 250C.

Cap not included. Application: It has been used to collect pheromone samples from adult male beetle Neoclytus mucronatus mucronatus, for analysis under GC-MS.

Synonyms: Snap Ring Vial, 100muL, polypropylene, 100 pk Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type.

Vials are used basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top glass vials are used on many autosamplers with a standard opening of 4.6 mm. Amber glass prevents the…

Green Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…

Wheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.

Application: Assembled screw cap with hole and PTFE/silicone septum may be used to minimise the risk of explosion of diazomethane, during preparation of diazomethane for gas chromatographic analysis. It was also used to seal off the heat treated samples, during determination of sugar-amino acid…

Application: Short thread autosampler vial may be used for simultaneously eluting and derivatizing nonylphenol polyethoxy carboxylates (NPECs) to their respective methyl esters, in subcritical (hot) water/ethanol extraction of NPECs from industrial and municipal sludges. Other Notes: The…

This vial is designed to work in the Waters WISP(TM) 96 Position Autosampler. Avialable in clear Type 1 borosilicate glass. Vials feature thicker walls for safer sample handling. Please order your closure separately. Legal Information: Waters is a registered trademark of Waters

This product is designed to work in the Waters WISP(TM) 96 Position Autosampler. Limited volume shell vials have a precisely designed conical bottom which permits maximum sample evacuation.Vials for waters® 96-position carousel, 8 x 40 mm is used for different life science applications. …

Application: Headspace vial may be used in storing samples for stability analysis of freeze dried and fluid bed dried alginate microcapsules coated with chitosan containing model probiotic bacteria, Lactobacillus plantarum.

Application: Screw cap may be used for capping water samples in amber glass vial comprising of a polytetrafluoroethylene silicon septum for the analysis of chlorinated volatile organic compounds in water samples using headspace-solid-phase microextraction with gas chromatography (HS-SPME-GC).

Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type.

Synonyms: rubber stopper; stopper

These vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…

Septa, tan PTFE/silicone is a gas tight and inert nature septa, which is used for high temperature applications during pretreatment and sample oxidation.

Vials (volume 22 mL, clear glass vial, thread 20-400) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.

PTFE-faced butyl septum was used in sealing headspace vials to analyse the sampling efficiency and breakthrough of methyl bromide on activated charcoal using GC. It was also used for sealing water samples during headspace analysis with GC-FID, in a study which demonstrates cross-validation of…