Vials, MilliporeSigma, CE and CE/MS
-
Certified glass inserts
MilliporeSigmaMicro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. Vial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts should be chosen based on the inner diameter of the vial neck. …
-
Insert for 2 mL standard opening vial
MilliporeSigmaVial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.
-
Assembled screw cap
MilliporeSigmaApplication: Assembled screw cap may be used to store fresh plant material for collecting volatiles using solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method performed for determining bisphenol A, 4-t-octylphenol and…
-
Septa, PTFE/Silicone
MilliporeSigmaApplication: Septa may be used in headspace solid-phase microextraction (SPME) (lyophilized aqueous extract).
-
Certified screw thread vials
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…
-
Vials, screw top with solid green Thermoset cap
MilliporeSigmaSynonyms: PK100 7ML AMBER VIAL,SCREW TOP, SOLID CAP W/PTFE LINER
-
Headspace vial, beveled top, rounded bottom
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type.
-
Inserts for 2 mL large opening vials
MilliporeSigmaInsert fits 12 x 32 mm vials with large opening (6.0 mm)
-
Snap Ring polypropylene autosampler microvial
MilliporeSigmaSynonyms: Snap Ring Vial, 100muL, polypropylene, 100 pk Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type.
-
Vials, screw top
MilliporeSigmaVials (volume 22 mL, clear glass vial, thread 20-400) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.
-
Headspace vial, screw top, rounded bottom
MilliporeSigmaThese vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…
-
Vials, crimp top
MilliporeSigmaOther Notes: The diameter of inserts varies between manufacturers. Only the following insert part numbers are compatible with these large opening vials. •24719, 24720 Glass insert, conical bottom, 6 x 29mm •24721 Glass insert with bottom spring, 6 x 29mm •24722 Polypropylene insert with bottom…
-
Certified screw thread vials, 10-425 thread
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…
-
Headspace vial, beveled top, rounded bottom volume
MilliporeSigmaHeadspace vials are available in several sizes. The style and diameter of headspace vials depend on the autosampler. Vials with rounded bottoms are sturdier and more resistant to pressure than the flat bottom vial. The rounded bottom version was created to allow the vial, when transported by a…
-
Certified screw thread vials
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…
-
ABC Vial™
MilliporeSigmaThese vials have a 9mm thread that allows them to be used with robotic systems. Use with autosamplers that require 12 x 32 mm screw top or crimp top vials. •40% wider opeing than standard screw cap vials •Superior thread design ensures a secure seal •Compatible with most GC autosamplers that…
-
Inserts for 2 mL large opening vials
MilliporeSigmaInsert fits 12 x 32 mm vials with large opening (6.0 mm) Application: It may be used to contain albumin standard solution in an absolute quantification method like protein hydrolysis, o-phthalaldehyde derivatization, and reversed-phase high-performance liquid chromatography analysis in a…
-
Assembled screw cap
MilliporeSigmaUse with:Waters 96-Position Autosampler Application: Assembled screw cap with hole and PTFE/silicone septum was used with screw top vials, to contain plant tissue in an experimental study done in order to identify major volatiles emanating from chestnut reproductive plant tissue. It may also be…
-
Vials, screw top
MilliporeSigmaApplication: Vials may be used in headspace solid-phase microextraction (SPME) followed by GC-FID for simultaneous analysis of furan, 2-methylfuran and 2-pentylfuran from juice samples.
-
Inserts for 2 mL large opening vials
MilliporeSigmaInsert fits 12 x 32 mm vials with large opening (6.0 mm)
-
ABC Vial™
MilliporeSigmaLegal Information: ABC Vial is a trademark of Wheaton Industries, Inc. Other Notes: The diameter of inserts varies between manufacturers. Only the following insert part numbers are compatible with these large opening vials. •24719, 24720 Glass insert, conical bottom, 6 x 29mm •24721 Glass…
-
Vials, screw top, silane-treated
MilliporeSigmamaterial: amber glass vial feature: closure type screw thread / deactivation Silanized packaging: pkg of 100 ea O.D. × H × I.D.: 15 mm × 45 mm × 8 mm Beilstein Registry Number: 2054397 size: 4 mL fitting: thread 13-425 Features and Benefits Proprietary…
-
Vials for Waters® 96-position carousel
MilliporeSigmaThis vial is designed to work in the Waters WISP(TM) 96 Position Autosampler. Avialable in clear Type 1 borosilicate glass. Vials feature thicker walls for safer sample handling. Please order your closure separately. Legal Information: Waters is a registered trademark of Waters
-
Vials, pre-cleaned and assembled
MilliporeSigmaEach of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows:1. Wash containers in hot water using laboratory grade non-phosphate detergent.2. Rinse three times with copious amounts of tap water to remove detergent.3. Rinse three times with ASTM Type I…
-
Vials Inserts
MilliporeSigmaMicro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. Vial inserts (volume 0.15 mL, glass insert (with bottom spring), O.D. x H 6 mm x 38 mm) allow the use of smaller sample volumes with standard autosampler vials.…
-
MSQ(TM) Caps with Septa
MilliporeSigmaWe recommend using LA Vials with the MSQ polypropylene cap with PTFE/silicone septa. This cap and septa combination was purposely designed for use with mass spectrometry. It shows little to no background contamination when compared to other cap and septa products in the marketplace. Legal…
-
Insert for 2 mL standard opening vial
MilliporeSigmaVial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.
-
Amber storage bottles
MilliporeSigmaStorage bottles are generally used to store stock solutions and other chemicals. Amber bottles are used to avoid oxidative changes in photosensitive chemicals. Synonyms: SCREW-CAP AMBER SEPTUM BOTTLE 240ML PK12
-
Vials, screw top, clear glass (vial only)
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type.
-
-
Vial crimp seals, BiMetal (magnetic)
MilliporeSigmaThe BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)