Clear or amber Range of sizes Teflon-lined caps The organic series consists of clear and amber glass vials with solid or open top closures. The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone…

Thermo Scientific™ Depyrogenated Sterile Empty Vials are offered in capacities ranging from 1 to 100mL. Certificate of Sterility & Pyrogen Test included with each lot. Sterile vials are Type I borosilicate, assembled with butyl stoppers and aluminum seals. Type 1 Borosilicate…

Clear, non-graduated glass vials with open top black phenolic caps Teflon® faced silicone liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass …

The dram/sample vials are available in clear or amber Type I borosilicate glass assembled with solid top or open hole black polypropylene screw thread closures. The solid top closures are lined with PTFE/F217 material and the open hole closures have PTFE faced silicone septa assembled in the…

Clear or amber 20 mL capacity 24-400 screw cap Clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that meets ASTM Type 1 Class A and USP Type 1 standards. Amber vials are manufactured from Wheaton 320 amber glass that meets ASTM Type 1 Class B and…

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

Clear and amber dram sample vials are made of Type I borosilicate glass, providing excellent resistance to heat shock and chemical leaching. Finneran dram vials are available assembled with screw thread closures PTFE/F217 lined or PTFE/Silicone lined.

Made of clear type 1 borosilicate glass, our screw thread vials are designed with a continuous thread "CT" finish, permitting a positive seal, ideal for a variety of uses including laboratory or manufacturer’s use. These vials are available in a wide range of sizes and packaged…

Clear Borosilicate Sample Vials offer maximum visibility. Type I borosilicate glass assures the contents integrity. Most vial sizes packaged in blue corrugate boxes to reduce carbon dust. Green Thermoset F217 & Teflon® Caps.

Vials with vinylite liners Consisting of 9710F12 series borosilicate glass vials and attached 2386C10 series caps fitted with cork-backed vinylite liners Vials with Caps (9710D13 to D73, 1233Z28 to Z37) Vials without Caps (9710F12 to F82, 9711B45)

White printed graduations and writing space Volumes:1.2mL -5.0mL External threads Temperature range: -196°C to 121°C. Polypropylene (PP) Autoclavable Sample tubes idea for storage and transporting serums and other biological material. All tubes have a round bottom, except 1224L46…

Clear graduated glass vials with solid top black phenolic caps Teflon® faced 14B rubber liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with solid and…

Our screw thread vials are designed with a continuous thread "CT" finish, permitting a positive seal, ideal for a variety of uses including laboratory or manufacturer’s use. These vials are available in a wide range of sizes and packaged in attractive, white low-particulate…

Screw caps Autoclavable Rubber lined caps Amber sample vials have solid top black phenolic caps that are Teflon® faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. With these vials, Teflon® and Type 1 glass are the only surfaces that will make…

Trust our low-level certified vials for Total Organic Carbon testing and sampling. Manufactured, tested and packaged by exacting standards, Thermo Scientific™ TOC Certified Containers are certified to contribute <10ppb or < 20ppb TOC as background. Containers: Available…

Clear, non-graduated glass vials with solid top black phenolic screw caps Teflon® faced 14B rubber liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with…

Flint glass, with slight shoulder Tight-fitting polyethylene cap, with thumb tab, can be removed and applied easily with same hand in which vial is held. Cases are constructed to store jars neatly, with caps attached, in partitioned trays that can be pulled out as drawers.

Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable clear borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Vacule vials have controlled ID, for accurate stopper fit. Designed for…

Vials and Phenolic Caps with PTFE-Faced / White Rubber Liners Manufactured from amber 203 borosilicate glass Closed top black phenolic closures attached Closures with PTFE-faced / white rubber liners or white rubber liners Vials packaged in corrugated trays with partitions

Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10…

Type I, Class A borosilicate glass Accept larger 2D bar code Improved stability Patented Vial Design (US D554,763 S) E-Z Ex-Traction Vials from Wheaton Science Products combine the best attributes of high recovery vials with a patented (U.S. patent pending) bottom to provide the optimum…

Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass Capacity ranges from 2mL to 40mL Provide constant pH for duration of sample storage life Chemically inert caps suitable for most chromatography and storage applications Top grade…

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

4 mL size Marked with blue line at 3 mL level Pre-attached solid-top black phenolic screw cap with 14B rubber liner Autoclavable

External thread Free standing Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable borosilicate glass (meets ASTM Type I Class A and USP Type I standards.)

Clear screw thread sample vial Closed-top black phenolic closure with rubber liner (not attached) 60910L series vials are packaged in lab packs Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

The EvoluChem™ PhotoRedOx Box device is designed to facilitate photochemical experiment. This device is compatible with most vial formats (0.3 ml, 2 ml, 4 ml and 20 ml vials). Its compact design allows for use with any stirring plate. A built-in fan keeps the reaction conditions at room…

The Organic series consists of clear and amber glass vials with solid or open top closures.  The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone septa assembled in the cap. The cap material is black…

Lab grade polypropylene Hinged Vials are sterile, leak-proof and airtight. The containers are manufactured in FDA approved Class 10,00 and Class 100,000 clean rooms. The containers are sterile by process and for most applications do not require a second means of sterilization. The containers are…

Short-style shell vials are ideal for storing dry products. Plain top design Lab pack quantities Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Polyspring inserts feature a polyethylene spring to center the bottom of the insert and to provide a cushion against needle contact Precision point inserts permit maximum sample extraction Use metal spring with inserts that lack the Polyspring

Our drosophila vials are available in polystyrene, polypropylene, or a flexible K-resin All vials feature a flat bottom, straight wall design for convenient racking, stacking, and filling The tray pack's 10 x 10 row configuration is ideal for quick, effortless filling