Tubes, Burets, Centrifuge
-
Autoclavable Ungraduated Round Bottom Centrifuge Tubes
Thermo Scientific Nalgene2602F40 is translucent Usable to 50,000 x g in refrigerated or non-refrigerated centrifuges *2610D22 and D30 with lip
-
Centrifuge Tube 12 ml
CorningThese 12mL heavy-duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…
-
PYREX Micro Tubes (Corning 8061)
CorningGraduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm
-
Tube 10mL Self Stand Screw Cap
CorningSkirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached
-
Description: Centrifuge Tube, 15mL, Attached Blue Flat Top Screw Cap, White Printed Graduations Material: Tube: Polypropylene (PP) Cap: High Density Polyethylene (HDPE) Specifications: Gamma Sterile RNase/DNase Free Max RCF: 10,000 x g …
-
Labcon UVSafe™ tubes are designed to block 100% of Ultra violet light. They can be used instead of foil to shield samples sensitive to UV band radiation. They have been lab tested and certified to block UV light, but will still pass visible light so you can see your sample volume.…
-
These 15mL PYREX® conical centrifuge tubes have white enamel graduations. The 15mL sizes are graduated upward from tip in 0.1mL divisions.
-
labForce® Centrifuge Tubes
labForce® (powered by Thomas Scientific)Printed Graduations (with marking area) New clearer polypropylene copolymer High centrifugal strength - up to 15,000 RCF Flat markable cap with seal Phenol / Chloroform resistant DNase, RNase and pyrogen free
-
These heavy duty 10mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity of these…
-
Oak Ridge Polysulfone Centrifuge Tubes with Sealing Caps
Thermo Scientific NalgeneEasily view contents using strong, transparent Thermo Scientific™ Nalgene™ Oak Ridge Polysulfone Centrifuge Tubes, featuring an enhanced resistance to acids and bases. Features: Round bottoms fit high speed rotors Transparent, with straw-colored cast Can be used up…
-
Friction-Fit Polypropylene Closures for Plastic Centrifuge Tubes
Thermo Scientific NalgeneEasily remove Thermo Scientific™ Nalgene™ Friction-Fit Polypropylene Closures for Plastic Centrifuge Tubes from the centrifuge with a convenient pull tab. These autoclavable closures are designed to fit Nalgene™ round and conical centrifuge tubes. They may not be liquid-tight…
-
MTC Bio’s SpectraTube™ is a new twist on a staple in the life science laboratory. We’ve taken the proven design of the 15 and 50mL conical tube and configured them conveniently in a foam rack with five different colored caps to make sample identification a breeze. These tubes…
-
Centrifuge Tubes
United Scientific SuppliesThese polypropylene tubes feature a screw top with easy to read black graduations. These sterile, conical bottom tubes also feature a writing area to allow for easy sample identification. Temperatures between 0-40degrees Celsius are the suggested working range.
-
These 50mL PYREX® conical centrifuge tubes have white enamel graduations and are graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50 in 1mL divisions. The No. 16 Standard Taper pennyhead stopper is solid glass.
-
Centrifuge Tube Oak Ridge™ Conical-Btm PPCO 35 ml
Thermo Scientific NalgeneCarry out a variety of applications with these tubes, which combine the superior separation and pelleting of a conical tube with the higher sealing capability of an Oak Ridge tube. Thermo Scientific™ Nalgene™ Conical Oak Ridge Graduated Polypropylene Centrifuge Tubes can spin up to…
-
Self-Standing Centrifuge Tubes
United Scientific SuppliesPolypropylene tubes include a convenient flat bottom so they stand on their own, a large white frosted labeling area, silk screen graduations, and a leak-proof cap. Autoclavable at 121°C and 15 psi for 30 minutes. Radiation sterilized DNase, RNase, Pyrogen and latex-free. Maximum RCF 9000.
-
Heavy-Duty Graduated Centrifuge Tubes with Screw Caps
DWK Life Sciences (Kimble)Graduated and calibrated to contain Scale is durable white ceramic enamel Made with heavier walled tubing to withstand higher centrifugation speed Top has a screw thread finish Autoclavable cap with rubber liner is included but not attached Replacement cap is 45066B Manufactured…
-
Posi-Click 0.6 mL Centrifuge Tubes
labForce® (powered by Thomas Scientific)Boil-proof cap Withstand 28,000 x g Easy to open, easy to close Double, high pressure locking ring RNase, DNase and pyrogen free Unsurpassed clarity Frosted writing surface and graduations Ultra smooth interior-low liquid retention …
-
Oak Ridge™ PSF Centrifuge Tubes
Thermo Scientific NalgeneStrong and tough like polycarbonate but much more acid- and base-resistant. Can be used up to 50,000 x g in refrigerated or non-refrigerated centrifuges. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to at least 80% of the total capacity.
-
EZ Flip™ Conical Centrifuge Tubes
Thermo Scientific NuncHinged flip cap for single-handed opening Chemical-resistant Leakproof Sterile EZ Flip™ Conical Centrifuge Tubes feature a patented closure system that allows one-handed opening and closing without compromising aseptic conditions. Manufactured to exacting tolerance,…
-
Shevsky-Stafford Type Glass Centrifuge Tubes
labForce® (powered by Thomas Scientific)Borosilicate glass Capacity: 6.5 mL Narrow tip 15 mL shields Graduations (mL): stem to 0.4 in 0.01 from 0.4 to 1 in 0.1 at 1.5, 2.0, 3.0, 4.0 and 6.5 (body)
-
Frosted or non-frosted Graduated or non-graduated Three capacities: 0.6, 1.5 and 2.0 mL 0.6 mL microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available…
-
Centrifuge Tubes
NEST Scientific USAPrinted Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and pyrogen free
-
Conical Bottom Centrifuge Tubes
SP Bel-ArtChemical and corrosion resistant Conical bottom 15ml polyethylene tubes with rim Molded in graduations Useful for refrigerated use and continuous temperatures up to 52°C (125°F) Capacity: 15ml O.D.: 17mm Length: 117mm
-
Tube Centrifuge Oil Short
DWK Life Sciences (Kimble)KIMAX tube designed for field use in testing petroleum. Calibrated to contain. Scale and legend are durable white ceramic enamel. Top is tooled to accept a Snap Cap (28150R-6) Graduated in %. 100 mL equals 200%
-
38mL High-Speed Round Bottom PPCO Centrifuge Tubes
Thermo Scientific NalgeneThermo Scientific™ Nalgene High-Speed Round-Bottom Polypropylene Copolymer Tubes uniform wall thickness and diameter provides improved rotor fit and performance. Tubes have excellent chemical resistance. Designed with round bottoms to fit high speed rotors in refrigerated or…
-
Centrifuge Tube 12 ml
CorningThese 12mL heavy-duty PYREX® conical centrifuge tubes are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and…
-
Large centrifuge tubes are perfect for clarifying large volume solutions or concentrating live cells in tissue culture. Made from pure pre-tested medical-grade resins to ensure the integrity of your work. Each lot is tested and certified free of RNase/DNase, Endotoxins, and is non-pyrogenic.…
-
Centrifuge Tube
EndochThe Endoch centrifuge tube is sterilized in nature to prevent any cross contamination in the event of transportation of samples. Polypropylene construction of the tube offers added strength.
-
Centrifuge Tubes, Disposable, Plain, Snap Cap Finish
DWK Life Sciences (Kimble)Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet-nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. The 5, 10, and 15 mL sizes…
-
PYREX® Oil Centrifuge Tube
CorningGraduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…
-
50 ml Screw Cap Centrifuge Tubes
SimportTubes made of either polystyrene or polypropylene These centrifuge tubes are also useful for collecting and transporting biological specimens. Leakproof characteristics are ensured by a flat top plastic screw cap with an inner sealing lip. Tubes are made of translucent polypropylene or…