Chromatography Tubes, Tubes
-
GBC Standard Graphite Tube, Pyrolytically Coated
PerkinElmerThe GBC Standard Graphite Tube is pyrolytically coated, D7/3.7x24.2 mm and comes in a quantity of 10. This tube is fit to perform on a GBC atomic absorption (AA) instrument and is the equivelant of GBC part 99-0059-00.
-
Inoculating Loops and Needles
MTC BioThese sterile disposable plastic loops and needles are designed for use in quantitative procedures such as sampling, urine counts and serial dilutions, as well as for bacterial inoculation. Because they are pre-sterilized and designed for single use, t
-
Exhaust Tube 1.5 m for Titan MPS
PerkinElmerUsed with optional accessory for exhausting Titan MPS oven cavity in laboratories that do not have exhaust systems. Exhaust Tube 1. 5 m (ID 76 mm, OD 82 mm) (one included with Titan MPS)
-
-
Partition Graphite Tube, Uncoated for Agilent
PerkinElmerThe partition graphite tube for Agilent is uncoated D6.9/3.9x24.9 mm and comes in a quantity of 10. It is fit to perform on atomic absorption (AA) instruments for Agilent and is equivalent to Agilent part 63-100015-00.
-
BioReactors Fixed Height Sample Tubes
ChemglassFixed height sampling tubes for bioreactors. Tubing is 1/4 inch OD.Like-for-like replacement parts for Applikon® Biotechnology and Broadley-James® brands of bioreactors.Applikon® is a registered trademark of Applikon Biotechnology, Inc. Broadley-James® and Broadley-James…
-
The exceptionally uniform temperature distribution obtained with transverse heating significantly reduces or eliminates condensation of the sample matrix components and "memory" effects and improves the atomization efficiency for refractory elements. For improved characteristic mass with volatile…
-
The pyrolytically coated GBC Standard Graphite Tube will perform on a GBC atomic absorption instrument.
-
Quartz Tube with Au/Pt Gauze for Amalgamation System
-
Tubes, Screw Thread, SVL®
ChemglassScrew thread tube for replacement of apparatus using the SVL® series of glass threads. For use with a CG-188 solid cap with PTFE liner or a CG-189 open top cap and sealing ring for use as a tubing connector. Threads are tooled on one end of a 6in length of tubing.
-
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
Capillary Sample Tubes
PerkinElmerHigh Capacity Hydrocarbon Trap contains: 750 cc of preconditioned activated charcoal, Stainless steel body, ¼” brass compression fittngs with ferrules for installation, Maximum pressure 200 psi, Recommended ow rate up to 2 L per minute, Will remove hydrocarbon impurities (50 ppm or less) from inert…
-
The spherically shaped platform accommodates up to 50 µL of sample. Graphite tubes with integrated platforms: Provide STPF conditions for volatile and nonvolatile refractory elements due to the significantly higher heating rates of tube and platform, which can be used for all elements. Offer an…
-
The Shimadzu Uncoated Standard Graphite Tube is fit-to-perform on a Shimadzu atomic absorption instrument and is equivalent to Shimadzu part 206-50587.
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
These tubes are fit to perform on atomic absorption (AA) instruments for Agilent and is equivalent to Agilent/Varian part 63-100037-00. PerkinElmer supplies a wide range of graphite tubes for non-PerkinElmer instrumentation. Graphite tubes are made with the highest quality material guaranteed to…
-
The partition graphite tube for Agilent is pyrolytically coated, D6. 9/3. 9x24. 9 mm and comes in a quantity of 10. It has an extended life and is fit to perform on atomic absorption (AA) instruments for Agilent. The extended life partition graphite tube is equivalent to Agilent part 63-100012-EL.
-
The graphite tube, the heart of the graphite furnace, plays a vital role in the overall stability of an analysis. In order to assure stable analytical conditions from one atomization cycle to the next, and from graphite tube to graphite tube, all graphite parts - contacts, tubes and platforms -…
-
Standard Graphite Tubes for Shimadzu
PerkinElmerThese tubes are fit to perform on atomic absorption (AA) instruments for Shimadzu, are pyrocoated, have a 90° contact cone and are equivalent to Shimadzu part 206-50588. PerkinElmer supplies a wide range of graphite tubes for non-PerkinElmer instrumentation. Graphite tubes are made with the…
-
PTFE connecting tube for connection to digestion vessels with 8 and 16 position Gas Containment Manifold.
-
For the lowest possible detection limits, residual contaminant levels may not be low enough to meet your requirements. UltraClean graphite tubes offer unmatched analytical advantages for special applications such as the determination of extremely low traces of Na, Ca, Fe, Cr and Ni in ultra-clean…
-
Needle Port Tube for Rheodyne Injection Valves, Model 9725/8125/7125/7725
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
Standard HGA Graphite Tubes with Lvov Groove
PerkinElmerThese HGA graphite tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. They are slotted to accept L'vov platforms, PerkinElmer part number B3001256. PerkinElmer has over four decades of experience in the design/development of graphite furnace systems and…
-
Overhead Drive
ChemglassADDITION DIP TUBE ASSEMBLIES, 3-PORT, SST, WITH HOSE BARBSOur hose barbed 3-port dip tube assemblies are designed for addition or sampling of media from Vertical Side Arm (VSA) Bioreactor Vessels. These addition dip tube assemblies are ideal for liquid addition of acid, base, antifoam or media.…
-
Omega Graphite Tube for Hitachi Instruments
PerkinElmerPerkinElmer offers Omega Platform Graphite Tubes designed specifically for Hitachi atomic absorption (AA) instruments.
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
These tubes are fit to perform on atomic absorption (AA) instruments for Agilent and is equivalent to Agilent/Varian part 63-100012-00. PerkinElmer supplies a wide range of graphite tubes for non-PerkinElmer instrumentation. Graphite tubes are made with the highest quality material guaranteed to…
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
Hitachi Standard Tube, Uncoated
PerkinElmerThe Hitachi® Standard Graphite Tube uncoated, D7.8/4.7x30 mm and comes in a quantity of 10. The Standard Graphite Tube is fit to perform on a Hitachi® atomic absorption (AA) instrument. It is equivalent to Hitachi® part 180-7400.
-
Every genuine PerkinElmer consumable and reagent is of high quality and designed specifically for your PerkinElmer instrument. Includes combustion and reduction tubes, reagents and capsules to perform 500 analyses in the CHNS mode. Total amount of runs may vary depending on selected combustion conditions.