2602F40 is translucent Usable to 50,000 x g in refrigerated or non-refrigerated centrifuges *2610D22 and D30 with lip

Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.

KIMAX tube used for the determination of small quantities of solids in large volumes of liquids. Calibrated to contain. Stem is graduated in 0.01 mL to 0.2 mL and the body has graduations at 25, 50, and 100 mL. Recommended for the determination of free water and sediment in diesel and other…

Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to…

KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to…

Without stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations:  from 1 to 5 mL in 1 mL   from 5 to 50 mL in 5 mL   from 50 to 100 mL in 10 mL divisions

Calibrated "to contain" (TC), this Goetz-type borosilicate glass bulb oil centrifuge tube is a pear shaped tube, similar to LG-4420, but it has a lower stem calibrated to hold 1.5mL. Specified in ASTM Method D 96 as suitable for a number of tests on petroleum products. Reference No.…

Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

KIMAX tube designed for field use in testing petroleum. Calibrated to contain. Scale and legend are durable white ceramic enamel. Top is tooled to accept a Snap Cap (28150R-6) Graduated in %. 100 mL equals 200%

Calibrated "to contain" (TC), this borosilicate glass long oil centrifuge tube is used for determinations of water and sediment in petroleum and its products, including fuel oils and lubricating oils. See ASTM Methods D 96, D 1796 and D 91 and also API Code 2500. Reference No. ASTM D…

Standard Taper KIMAX® tube with a screw thread finish Graduated and calibrated to contain Cap supplied has cemented-in white rubber liner and is packaged separately Scale, legend and marking spot are durable white ceramic enamel Replacement cap for 0493K43 & 0492Y27 is 45066B …

These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…

This long form 100mL capacity oil centrifuge tube has a capillary tip that makes it ideal for use when only small amounts of solids are present. Made of borosilicate glass, its approximate widest O.D. is 38mm and approximate length is 200mm. Reference No. ASTM D 2709

Designed for use in ASTM D-2273 and ASTM D-2709, this borosilicate glass capillary tipped long form centrifuge tube is 200mm in length.