Syringes, Ready to Ship
-
Sterile, designed for single use Individually wrapped, with protective guard on needle Non-toxic; non-pyrogenic Syringe capacity and needle size are plainly marked on wrapper, which is color-coded to needle gauge. Needle hub and plunger are made of Color-Klear™ translucent,…
-
Autosampler Syringes
Agilent TechnologiesNeedle Styles Broad selection of syringes for manual and auto injection to provide accurate and effective sampling Tapered or straight needles Fixed Needle Syringe The epoxy-cemented, stainless steel needle is centered in the syringe barrel at the depth of the zero…
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…
-
Bulk, Non-sterile DNR (Latex) free 1600/case *Intended use for general purpose fluid aspiration/injection and NOT for storage before administration.
-
Cemented needles on 8928B58-64 Removable needles on 8928B67 Length: 2” Point style: 2 See 8928C40 for needle for 8928B67.
-
Safety without compromises Virtually eliminates splatter and aerosolization Allows for needle changes depending on protocol Easy-to-use SafetyGlide™ mechanism SafetyGlide™ Activation-Assist mechanism is single-handed, quick and easy to operate. Protective arm is…
-
Techon Flexible Tip
OK InternationalTS-P Series flexible tips allow access to hard-to-reach areas with the added benefit of being able to ''customize'' the length. Benefits of using this tip include resisting Cyanoacrylate clogging and preventing damage to substrates. In addition they are silicone and chloride-free with a maximum…
-
Batch fill with efficiency BD sterile syringe convenience trays help pharmacy staff save time and effort when batch-preparing syringes.
-
NIST Traceable For use with gasses Fixed, removable or Luer Lock needles Similar to 8929R01 series but in larger sizes. Luer Lock needles sold separately, see 8930D70 series.
-
Monoject™ Syringes – Rigid Pack
CovidienMonoject™ Syringes are available sterile or non-sterile, in 1, 3, 6, 10, 12, 20, 35, 60 or 140 mL sizes, with several different tip designs for convenience. Features: • Polypropylene barrel and plunger rod • Graduated barrel markings …
-
Dispenser packs of non-sterile syringes make sense. They're more economical and easier on the environment. Available in both luer slip and luer lock styles. Convenient dispenser cartons Reduced waste No wrappers to remove Require less storage space These all polypropylene…
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1μL up to 500μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…
-
Monoject™ 140 mL Piston Syringes
CovidienFeatures and Benefits: Bold dual graduations: 140mL in 5mL increments and 5 oz, in 1/4 oz. increments Autoclavable Latex Free
-
Tan, PrecisionGlide Allergy Tray Attached Needle Without Safety 1mL Sterile 27…
McKesson Medical-Surgical -
OSHA standards require healthcare facilities to “reflect changes in technology that eliminate or reduce exposure to bloodborne pathogens [1910.1030(c)(1)(iv)(A)]”. OSHA guidelines can be obtained from your local OSHA contact and professional associations. BD SafetyGlide™…
-
NORM-JECT Plastic Syringes
RestekNORM-JECT syringes are latex-free, contain no rubber, no silicone oil, styrene or DEHP and are DNA-free. These syringes are the choice for any situation needing an inert, nonreactive syringe. Because of their composition, they are ideal for chromatography and many other laboratory procedures. They…
-
Needle, Pink, High Precision Tip, 20 gauge, 0.5"
Jensen GlobalPink Threaded Luer Lock Hub; 20 gauge 0.5 inch High Precision tip - id inch:0.024(0.600mm) od inch:0.036(0.910mm). Polypropylene plastic threaded hub with burr free passivated stainless steel canula, bonded with a UV cured adhesive.
-
-
Disposable Plastic Syringes
National ScientificFor use with syringe filters No rubber or synthetic plunger gaskets No silicone oil lubricant Luer-Slip or Luer Lok® fittings Two-part, all plastic syringes have polypropylene barrels and either polypropylene or polyethylene plungers for a wide range of chemical…
-
Monoject™ 35mL Syringes
CovidienMonoject™ 35mL syringes are sterile, single-use, individually packaged in either 100% recyclable rigid packaging or soft pack. Available with different tip styles for convenience.
-
Techon Wiper Piston
OK InternationalWiper Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Wiper seal pistons prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100 psi (6.9bar).
-
27 Gauge 1.0" IT Series Tip ID .009" - Gray
Jensen GlobalOur highly flexible PTFE dispensing tips offer a scratch-free dispensing solution designed for highly sensitive applications. The polytetrafluoroethylene composition works especially well with cyanoacrylates, anaerobics and other epoxies that tend to clog in a typical stainless steel cannula. The…
-
Needle, Pink, 20 gauge, 0.5"
Jensen GlobalPInk Threaded Luer Lock Hub; 20 gauge 0.5 inch - id inch:0.025(0.635mm) od inch:0.036(0.9144mm). Polypropylene plastic threaded hub, with a UV bonded stainless steel canula.
-
700 Series Dispensing Syringe Barrel, 30 cc
OK InternationalTechcon System's 700 Series Premier dispensing syringe barrels are silicone and chloride- free and designed to work with industry standard equipment. The syringe barrels are made from low friction polypropylene to ensure accuracy, repeatability and productivity. Features a double Helix Luer lock…
-
-
Non-sterile, clean, ready-to-use Assembled, graduated Bulk packed in double wrapped polybags. Can be autoclaved or gas sterilized out of polybags. 8940S32, 8940S69, 8940T39, 8940T75, & 8940V50 *Intended use for general purpose fluid aspiration/injection and NOT for storage…
-
Hypodermic Needles
Cadence ScienceCadence Science® hypodermic needles are precision made and designed to ensure strict adherence with U.S. Government specification GG-N-196. Points are machine ground to achieve uniform sharpness. Precision grinding, micro-bead jet blasting, and ultrasonic cleaning assure freedom from burrs and…
-
Needle, Blue, 25 gauge, 0.5"
Jensen GlobalJensen Global blue gauge needle consists of Blue Threaded Luer Lock Hub; 25 gauge 0.5 inch - id inch:0.012(0.3048mm) od inch:0.02(0.508mm). Polypropylene plastic threaded hub, with a UV bonded stainless steel canula.
-
Precision TE Series Needle Tip, 23 Gauge, .25", Orange
OK InternationalThe TE series 23-25 gauge needle consists of stainless-steel cannula with a double helix Polypropylene hub. This premier line of dispensing needles is burr-free with an electro-polished cannula for unobstructed and consistent material flow. In addition they are silicone and chloride free. …
-
Monoject™ Hypodermic Needles are available as needle only or needle and syringe combinations Features: • Stainless steel lubricated cannula • Color-coded needle hub • Not manufactured with DEHP or natural rubber latex • Sterile,…