Standards, T, 100 mL
-
Tungsten, plasma standard solution, W 1,000µg/ml
BeanTown ChemicalMDL No: MFCD00011461 Liquid (NH4)2WO4 in H2O
-
The SPEX CertiPrep™ grade ICP-MS initial calibration verification standard 2 is suitable for research and laboratory use.
-
-
Ricca Tantalum ICP Standard
Ricca ChemicalThe Ricca Chemical tantalum ICP standard with a composition of 96.99% water, 1.92% ammonium heptafluorotantalate and 1.10% hydrofluoric acid, is suitable for use in various industries. It can be stored at a temperature of 15 to 30 degree C.
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Titanium, plasma standard solution, Ti 1,000µg/ml
BeanTown ChemicalMDL No: MFCD00011264 UN No: UN3264; Haz Class: 8; Packing Group: III Liquid, Ti in 5% HNO3/tr. HF Density (g/mL): 1.000
-
spex® Claritas PPT® Grade ICP-MS Tuning Solution 2
SPEX CertiPrepSPEX CertiPrep Claritas PPT® standards are a class of Inorganic Certified Reference Standards designed specifically for today's new generation of trace ICP and ICP-MS instrumentation. Based on extensive development, our chemists have formulated this line of high-purity standards for user…
-
Assurance® Grade Trace Metals III
SPEX CertiPrepStandards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only…
-
Tin, plasma standard solution, Sn 1,000µg/ml
BeanTown ChemicalEC No: 231-595-7 MDL No: MFCD00133862 UN No: UN1789; Haz Class: 8; Packing Group: II Liquid, Sn in 20% HCl Density (g/mL): 1.045-1.051
-
-
-
spex® Claritas PPT® Grade ICP-MS Tuning Solution 4
SPEX CertiPrepSPEX CertiPrep Claritas PPT® standards are a class of Inorganic Certified Reference Standards designed specifically for today's new generation of trace ICP and ICP-MS instrumentation. Based on extensive development, our chemists have formulated this line of high-purity standards for user…
-
pH: 6 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.00 g/cm3 (20°C) Ignition Point: 6 (H2O, 20°C)
-
UN No.: 3264 pH: 1 (H2O, 20°C) Density: 1.012 g/cm3 (20°C) Ignition Point: 1 (H2O, 20°C)
-
pH: 3 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.000 g/cm3 (20°C) Ignition Point: 3 (H2O, 20°C)
-
spex Assurance® Grade Trace Metals II
SPEX CertiPrepStandards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only…
-
Matrix: H2O Min: >= 995 Max: =< 1005 ppm Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-