Standards, S, 100 mL
-
VeriSpec™ Nickel Standard for ICP/MS, 100 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 99.5 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Matrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Common and Transition Elements Multielement Standard
GFS ChemicalsMatrix: 5% nitric acid with trace tartaric acid. Ag 100 ug/ml Al 100 ug/ml As 100 ug/ml Ba 100 ug/ml Be 100 ug/ml Bi 100 ug/ml Ca 1000 ug/ml Cd 100 ug/ml Cr
-
Ricca Cerium AA Standard
Ricca ChemicalThe Ricca Chemical cerium AA standard is perfect for the analysis and detection of chemical samples in laboratories and research facilities.
-
Ricca 1000 ppm Na in 3% HCl Sodium AA Standard
Ricca ChemicalThe Ricca Chemical sodium AA standard with a composition of 98.44% water, 1.31% hydrochloric acid and 0.25% sodium chloride, is suitable for use in atomic absorption spectrometry. It can be stored at a temperature of 15 to 30 degree C.
-
Formula: Zn in 3% HNO3
-
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
VeriSpec™ Cerium Standard for ICP, 1000 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Barium Standard for ICP, 10 g/L in 5% HCl
Ricca ChemicalMatrix: 5% HCl Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
-
Iridium 1,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 1,000 +/- 10 ug/ml Matrix: 20% Hydrochloric acid NIST Traceable
-
Ricca Magnesium ICP-MS Standard
Ricca ChemicalThe Ricca Chemicals magnesium ICP-MS standard with a composition of 96.75% water, 3.0% nitric acid, 0.16% magnesium Oxide, is suitable for use in laboratory use only. It can be stored at a temperature of 15 to 30 degree C.
-
-
-
Magnesium ICP Standard
Ricca Chemical1 mL = 1 mg Mg (1,000 ppm Mg) Formula: MgO in 3% HNO3 Formula Weight: 40.30
-
VeriSpec™ Cadmium Standard for ICP, 1000 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Ricca Silver ICP Standard
Ricca ChemicalThe Ricca Chemical silver ICP standard is perfect for the analysis and detection of various liquids samples in chemical laboratories.
-
VeriSpec™ Dysprosium Standard for ICP, 10 g/L in 5% HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Aluminum 1000 ppm ICP Standard Solution
GFS ChemicalsConcentration 1,000 +/- 10 ug/ml Matrix: 5% nitric acid NIST Traceable
-
pH: 3.4 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.00 g/cm3 (20°C) Ignition Point: 3.4 (H2O, 20°C)
-
Vanadium 10,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 10,000 +/- 100 ug/ml Matrix: 5% Nitric Acid NIST Traceable
-
VeriSpec™ Yttrium Standard for ICP, 1000 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Calcium Standard for ICP, 1000 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Ricca Scandium ICP Standard
Ricca ChemicalThe Ricca Chemical scandium ICP standard is perfect for the analysis and detection of various liquids samples in chemical laboratories.
-
Matrix: 2% HNO3/1% HF Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
UN No.: 3264 pH: Solubility: (20°C) not applicable Density: 1.018 g/cm3 (20°C) Ignition Point:
-
VeriSpec™ QC Standard for Chlorines/Chlorides, 10,000 mg/L
Ricca ChemicalMatrix: H2O Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Lead AA Standard
Ricca Chemical1 mL = 1 mg Pb (1,000 ppm Pb) Formula: Pb in 3% HNO3 Formula Weight: 207.20
-