Standards, P, 100 mL
-
Ricca 10, 000 ppm P in H2O Phosphorus ICP Standard
Ricca ChemicalThe Ricca Chemical phosphorus ICP with a composition of 96.36% water and 3.64% ammonium dihydrogen phosphate, is used to determine metals and few nonmetals in solutions. It can be stored at a temperature of 15 to 30 degree C.
-
-
Platinum, plasma standard solution, Pt 10,000µg/ml
BeanTown ChemicalEC No: 231-595-7 MDL No: MFCD00011179 UN No: UN1789; Haz Class: 8; Packing Group: II Liquid, Pt in 20% HCl
-
Potassium Standard 100ppm
ExaxolThe Exaxol 100 ppm potassium standard is used to determine the concentration of solutions in ion analysis or titrations. It is used in atomic absorption spectroscopy methods. It is used in manufacturing soaps and detergents.
-
Assurance® Mixed Multi-Element Standards for AA & ICP Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns…
-
-
Phosphate, Ion chromatography standard solution, PO4-3 1,000µg/ml
BeanTown ChemicalMDL No: MFCD00145108 Liquid, KH2PO4 in H2O
-
-
Palladium, plasma standard solution, Pd 1,000µg/ml
BeanTown ChemicalEC No: 231-595-7 MDL No: MFCD03613603 UN No: UN1789; Haz Class: 8; Packing Group: II Liquid, Pd in 20% HCl
-
Potassium, plasma standard solution, K 10,000µg/ml
BeanTown ChemicalEC No: 231-714-2 MDL No: MFCD00133776 UN No: UN3264; Haz Class: 8; Packing Group: III Liquid, K in 5% HNO3
-
Ricca Profile Solution
Ricca ChemicalThe Ricca Chemicals profile solution is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Assurance® Grade Primary Drinking Water Metals with Mercury
SPEX CertiPrepAssurance® Mixed Multi-Element Standards for AA & ICP Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns…
-
Palladium, plasma standard solution, Pd 1,000µg/ml
BeanTown ChemicalMDL No: MFCD00011167 UN No: UN3264; Haz Class: 8; Packing Group: III Liquid, Pd in 5% HNO3
-
EC No: 231-595-7 MDL No: MFCD00151264 UN No: UN1789; Haz Class: 8; Packing Group: II Liquid, Matrix: 20% HCl
-
Palladium, plasma standard solution, Pd 10,000µg/ml
BeanTown ChemicalEC No: 231-595-7 MDL No: MFCD03613603 UN No: UN1789; Haz Class: 8; Packing Group: II Liquid, Pd in 20% HCl Density (g/mL): 1
-
Solubility: (20°C) insoluble Flash Point: 63°C Density: 0.86 g/cm3 (20°C)