Sodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl. Application: For use as Blood Bank Saline

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

The Ricca Chemical sodium acetate with a composition of 80.00% water and 20.00% sodium acetate trihydrate, is suitable for use in food, textile, cosmetic and concrete industries. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical soap solution helps in minimizing the surface tension of water thus making it ideal to wet and clean dirty surfaces. Soap solution is derived from fatty acids and is used extensively for cleansing and lubricating products.

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical sulfosalicylic acid with a composition of 81.82% water and 18.18% 5-sulfosalicylic acid dihydrate, is suitable for use in urine protein content determination. It is used in wide range of industries. It can be stored at a temperature of 15 to 30 degree C.

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

Sodium carbonate refers to a family of inorganic compounds with the formula Na2CO3?, where x can range from 0 to 10. All forms are white, odorless, water-soluble salts that yield alkaline solutions in water. Historically, it was extracted from the ashes of plants grown in sodium-rich soils.

The Ricca Chemical synthetic sea water is composed of 95.87% water, 2.39% sodium chloride, 1.08% magnesium chloride hexahydrate, 0.15% calcium chloride dihydrate, 0.07% potassium chloride, 0.02% sodium bicarbonate, 0.01% potassium bromide, 0.00% strontium chloride hexahydrate, 0.00% boric acid,…

The Ricca Chemical sodium hydroxide is widely used in biochemistry industry and is useful for neutralization of acids. It is a basic solution and has the ability to raise pH of chemical solutions. This neutralization agent is perfect for use in the chemical industry, paper making, petroleum…

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical sulfosalicylic acid with a composition of 90.57% water and 9.43% 5-sulfosalicylic acid dihydrate, is suitable for use in urine protein content determination. It is used in wide range of industries. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical sodium thiosulfate with a composition of 59.02% water, 40.65% sodium thiosulfate pentahydrate and 0.33% sodium carbonate, is suitable for use in analytical chemistry analysis. It is used in water treatment process and is used to treat cyanide poisoning. It can be stored at a…

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

The Ricca Chemical sodium hypochlorite solution with a composition of 94% water and 6.00% sodium hypochlorite, acts as a bleaching or disinfectant agent. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical starch indicator with a composition of 99.38% water, 0.50% starch, soluble and 0.13% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C. Application: For Iodometric Titrations

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP). Application: Suitable for Orsat Gas Analysis

Silver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

The Ricca Chemical synthetic fresh water with a composition of 99.91% water, 0.04% sodium bicarbonate, 0.02% magnesium sulfate, 0.02% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. Very…

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

The Ricca Chemical saccomanno collection fluid is perfect to use for the fixation process of cytology specimens including fine needle aspirates, urine, sputum and bronchial washings and pleural and peritoneal fluids. Fixative and preservative for sputum samples

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water. Application: For Fat, Babcock Method

The Ricca Chemical synthetic fresh water with a composition of 100.00% water, 100.00% sodium bicarbonate, 0.00% magnesium sulfate, 0.00% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. …

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical synthetic fresh water with a composition of 99.99% water, 0.00% sodium bicarbonate, 0.00% magnesium sulfate, 0.00% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. Soft…

The Ricca Chemical sulfosalicylic acid with a composition of 95.15% water, 4.85% 5-sulfosalicylic acid dihydrate, is suitable for use in urine protein content determination. It is used in wide range of industries. It can be stored at a temperature of 15 to 30 degree C.