Sealing Film, MilliporeSigma, Bottles
-
ThermalSeal RT(TM) film thickness 2 mil
MilliporeSigmaA combination of optically transparent polyester film with a strong, ultra-smooth, non-absorbing, non-fluorescing medical-grade adhesive for superior performance in real-time PCR applications. In place of the customary paper backing, ThermalSeal RT has a plastic liner which is easily removed before…
-
PARAFILM® M roll size 4 in. x 125 ft
MilliporeSigmaPARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…
-
X-Pierce(TM) film non-sterile
MilliporeSigmaAlso useful for protecting contents of plate from contamination during multiple manual reagent additions over time. X-Pierce films are 89 mum thick vinyl with a 18 mum thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96 well plates. A precut…
-
Aluminum foil
MilliporeSigmaEasily covers laboratory dishes and forms inexpensive liners for bench tops, drawers, and trays. Easy cleanup in case of spill or contamination.
-
AlumaSeal® CS Films for cold storage
MilliporeSigmaAlumaSeal CS sealing films are a specially formulated aluminum foil with a 50 mum layer of acrylic adhesive that withstands cold storage at temperatures between: -80 C to +120 C . Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or…
-
Zone-Free(TM) Sealing Films non-sterile
MilliporeSigmaWith a 70 mum polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip…
-
A 38 mum thick aluminum sealing foil film with a 38 mum layer of acrylic adhesive for use with 384 well plates. AlumaSeal 384 sealing films have one end tab with no perforations. •Sealing film dimensions are 137.3 mm x 82.5 mm (13.5 mm end tab) •Available as non-sterile only •Pierceable …
-
AlumaSeal® CS Films for cold storage
MilliporeSigmaAlumaSeal CS sealing films are a specially formulated aluminum foil with a 50 mum layer of acrylic adhesive that withstands cold storage at temperatures between: -80 C to +120 C . Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or…
-
eXTReme(TM) Universal fit PCR Plate Seal polyester film
MilliporeSigmaXTR films offer high performance under extreme conditions. A 2 mil polyester film with a 1.65 mil layer of strong acrylic adhesive. eXTReme Seal films remove cleanly from plate surfaces without adhesive stringing, residue or contamination. Each sealing films measures 78.3 x 140.5 mm and offers…
-
Brightmax(TM) Sealing Films
MilliporeSigmaBrightMax(TM) sealing films are 200 mum thick white vinyl adhesive sealing films for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax(TM)…
-
PARAFILM® M
MilliporeSigmaPARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…
-
ThermalSeal RTS(TM) Sealing Films
MilliporeSigmaThermalSeal RTS(TM) sealing film is a 50 mum thick polyolefin with 50 mum inert encapsulated silicone adhesive. They are optically clear, with low autofluorescence, and are especially suited for real-time qPCR, storage, and protein crystallization applications. The encapsulated silicone adhesive is…
-
PTFE sealing tape
MilliporeSigmaEliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, bell jars, etc. Provides a vacuum-tight seal, yet will release readily even after long periods of time.
-
ClearASeal Peel(TM) heat sealable seal LabSheet
MilliporeSigmaClear peelable film with moderate solvent resistance.Features: Film, clear, peelable, good optical clarity, moderate solvent resistance, peelable, non-pierceable.Compatibility: Polypropylene (PP), Polyethylene (PE), Polystyrene (PS) & Cyclic Olefin Copolymer (COC) plates.Seal integrity range: -80C…
-
PTFE sealing tape
MilliporeSigmaEliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, bell jars, etc. Provides a vacuum-tight seal, yet will release readily even after long periods of time.
-
SealPlate® film sterile
MilliporeSigmaSheets pre-cut to fit standard multiwell plates. Both film and adhesive are inert and compatible with microplate procedures. Adhesive forms a tight, waterproof seal, preventing cross-contamination and evaporation. SealPlate film is 2 mil (0.05 mm) polyester, with a functional temperature range of…
-
AlumaSeal® II film for PCR and cold storage, sterile
MilliporeSigmaA 36 mum soft non-permeable aluminum foil sealing film with strong medical-grade adhesive, AlumaSeal® II sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length…
-
EZ-Pierce(TM) films non-sterile, Excel Scientific, EZP-100
MilliporeSigmaEasily pierceable, 70 mum thick, polyethylene with acrylic adhesive, EZ-Pierce films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 mm by 142.9 mm for 96 well plates. Legal Information: EZ-Pierce is a trademark of Excel Scientific, Inc.
-
SealPlate® film non-sterile
MilliporeSigmaSheets pre-cut to fit standard multiwell plates. Both film and adhesive are inert and compatible with microplate procedures. Adhesive forms a tight, waterproof seal, preventing cross-contamination and evaporation. SealPlate film is 2 mil (0.05 mm) polyester, with a functional temperature range of…
-
SealPlate® ColorTab(TM)
MilliporeSigmaSealPlate ColorTab adhesive films consist of 50 mum thickness clear polyester. They minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal for ELISA, EIA, and similar assays. These unique films include a color dot and white writing area on each end tab for…
-
ThermalSeal® MiniStrips™
MilliporeSigmaThermalSeal MiniStrips films are identical to ThermalSeal films, but designed for sealing only one or two 8 well rows at a time on PCR plates. Each film is 19.0 x 103.2 mm, including two removable positioning tabs. The long dimension with tabs removed is 82.6 mm.Note: Each package of 200 contains…
-
ThermalSeal® films, classic non-sterile
MilliporeSigmaA 50 mum heat-resistant polypropylene sealing film with a 25 mum layer of acrylic adhesive designed for thermal cycling applications. Each sealing film measures 79.4 x 137.8 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 123.1 mm.…
-
AeraSeal(TM) film sterile
MilliporeSigmaA 140 mum thick hydrophobic porous sealing film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal(TM) sealing films minimize cross-contamination, spillage and evaporation. They allow uniform…
-
PARAFILM® M
MilliporeSigmaPARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…
-
Plate roller secures sealing film onto plate
MilliporeSigmaConsists of a rubber coated dowel with a little give. The rubber allows better conformance of the film around the well area when sealing plates (Ensures sealing film covers all wells of a multiwell plate).
-
ThinSeal(TM) film sterile
MilliporeSigmaSemi-pierceable, and leaves minimal residue. Polyester films just 25 mum thick, clearer and marginally pierceable with single-channel pipettes for sample recovery. Dimensions are 54.0 mm x 141.0 mm. Legal Information: ThinSeal is a trademark of Excel Scientific, Inc.
-
A 38 mum thick aluminum sealing foil film with a 38 mum layer of acrylic adhesive for use with 96 well plates. Fits inside the rim of raised-rim plates. AlumaSeal 96 sealing films have one partial-width end tab with no perforations. •Film dimensions are 127 mm x 78 mm (9.5 mm end tab) •Available…
-
ThermalSeal RT2RR(TM) 50 mum polyester sealing films for real-time PCR are sized to fit within the edges of raised-rim 96 well plates. The same consistent ultra-high optical clarity as Excel's ThermalSeal RT(TM) sealing films makes possible more reproducible, reliable, and consistent DNA…
-
X-Pierce(TM) film sterile
MilliporeSigmaAlso useful for protecting contents of plate from contamination during multiple manual reagent additions over time. X-Pierce films are 89 mum thick vinyl with a 18 mum thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96 well plates. A precut…
-
ThermalSeal® films, classic sterile
MilliporeSigmaA 50 mum heat-resistant polypropylene sealing film with a 25 mum layer of acrylic adhesive designed for thermal cycling applications. Each sealing film measures 79.4 x 137.8 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 123.1 mm.…
-
ThermalSeal RTS(TM) Sealing Films
MilliporeSigmaThermalSeal RTS(TM) sealing film is a 50 mum thick polyolefin with 50 mum inert encapsulated silicone adhesive. They are optically clear, with low autofluorescence, and are especially suited for real-time qPCR, storage, and protein crystallization applications. The encapsulated silicone adhesive is…
-
AbsorbMax(TM) film non-sterile
MilliporeSigmaAbsorbMax films are 200 mum thick black vinyl adhesive films for use with 96 well, 384 well, and 1536 well black microplates. The films may be applied to either the top or bottom of the plate. A split backing aids in applying the film properly. Edge cutouts assist in positioning and accommodate…