Sample Preparation, Chromatography, Supplies
-
Diatomaceous earth is used as a filter aid to improve extraction efficiency of densely packed soils, such as clays. By mixing the sample with diatomaceous earth, recoveries can be improved and excess moisture can be absorbed. Packaged in a convenient 1 kg quantity. Improves extraction…
-
For ultimate inertness, SilcoCan air sampling canisters feature our unique Siltek treatment technology. Even highly active components, at low parts-per-billion concentrations, can be readily sampled and stored without loss. The RAVE valve is a high-quality, metal-to-metal seal, 2/3-turn valve with…
-
Extend the lifetime of air canisters, flow controllers, and other accessories. Serve as a more economical sacrificial connection, protecting more valuable equipment from thread damage. Optional filter frit removes particulates that cause damage, leaks, and valve failure. Standard compression…
-
These small canisters are designed for controlled sampling, such as personal air sampling, as an alternative to tube and pump samplers. The 1,000 cc canister is suitable for sampling volatile organic compounds in air according to methods TO-14A, TO-15, IP-1A, ASTM 5466, OSHA PV 2120, and NJ DEP Low…
-
Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…
-
Automated, in-line sample extract cleanup dramatically reduces sample preparation time. Simultaneous analysis and ILSP cartridge wash eliminate downtime between samples. Fast, simple alternative to QuEChERS or SPE for multiresidue pesticides analysis in foods. Minimizes money spent on…
-
-
Large Volume SPE Reservoir
MilliporeSigmaRetention Mechanisms: Lipid matrix is retained via normal phase, hydrophobic, and Lewis acid-Lewis base interactions Sample Matrix Compatibility: Oils Dual layer SPE that contains both LC-Florisil® (upper layer) and Z-Sep/C18 (lower layer) SPE sorbents, separated by a PE frit …
-
Rocker Vacuum Pumps
RestekOil-free vacuum pumps are piston powered, so they do not pollute the air and require minimal maintenance Quiet, low-vibration units keep disturbances to a minimum Built-in thermal protector automatically shuts off pump if it overheats and then restarts it once the unit is cool Inlet filter…
-
Optimized for Methods TO-14A, TO-15, IP-1A, ASTM D5466, OSHA PV 2120, and NJ DEP Low Level TO-15 Proprietary electropolished surface maintains compound stability. High-quality, metal-to-metal seal, 2/3-turn valve with stainless steel diaphragms prevent sample adsorption for more-accurate…
-
2-inch vacuum/pressure gauges, 316 stainless steel with 1/8" NPT fitting and center back mount. Recommended for use with canisters.
-
Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities
-
ALTEF Gas Sampling Bags
RestekSampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…
-
Extrelut Nt Refill Pack For Column Fillings Extrelut Nt 20
MilliporeSigmaCAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3
-
Proven long life—durable design is engineered to exceed 15,000 cycles Leak-free performance—every valve is helium leak-tested to 1x10 -6 mL/sec Effortless operation—easily finger-turn to achieve full valve closure (only 10 in-lb) Enhanced damage-resistance—W-type…
-
1/16" fittings, 1mm ID, for "W Type" valves Ideal for samples containing low concentrations of sulfur or other active compounds Sample loop sizes from 5 µL to 5 mL Sulfinert treatment eliminates active sites in the valve or loop for better recovery of active compounds.
-
Ottawa Sand (Bulk Adsorbent)
RestekOttawa sand is listed in several U.S. EPA methods as the specified medium for matrix spike and laboratory control blanks. Sample medium for matrix spikes and laboratory control blanks Packaged in convenient 5 kg buckets
-
Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities
-
Restek PAL SPME Fibers
RestekSuitable for a wide range of analyte chemistries and sample matrices Reliable performance meets or exceeds other brands Robust aluminum hub is more durable than plastic Optimized for PAL system autosamplers and compatible with most GC inlets SPME automated sample preparation reduces…
-
Accurately and precisely dispense liquids for QuEChERS extractions with this versatile pump. A quick, simple adjustment lets you set the output volume anywhere from 2.5 mL to 30 mL per stroke, and the included adaptors will accommodate most reagent bottles. Adjustment knob offers 56 output…
-
Mini-Can Accessories
RestekThese accessories enhance mini-can usage and provide flexibility in their application, from personal, to area, to vapor intrusion sampling. Sampling Belt: Adjustable up to 50" Two reclosable hook-and-loop straps securely hold mini-can or other sampling device Straps slide…
-
Anhydrous sodium sulfate is the most common drying agent used to remove moisture from sample extracts. We package our 10-60 mesh material in recloseable buckets. Ideal for removing water from sample extracts Activate by heating to 400°C for four hours before use Packaged in…
-
Robust, low-flow pump optimized for sampling volatile organic compounds (VOCs) onto thermal desorption (TD) sorbent tubes Small, lightweight, easy to use, and intrinsically safe—ideal for personal monitoring and a wide range of other air and gas sampling applications Compatible with any…
-
Resprep® vacuum manifolds for SPE sample preparation, filtration, and elution are available in 12- and 24-port configurations. These manifolds help in achieving consistent extraction and filtration results. Multiple sample processing with these manifolds simplifies procedures and saves time. The…
-
Threaded Midget Bubbler
MilliporeSigmaFeatures and Benefits Threaded Midget Bubbler - 20mm threads. Fritted glass stem. Back pressure <7 in. of water with 15mL water. 6-dram vial (22mL) included. General description These borosilicate glass impingers (for particles) and bubblers (for gases and vapors) are ideal for NIOSH…
-
Resprep SPE Flow Filters
RestekDesigned specifically to improve flow when filtering oil and grease samples Use with Resprep Diskcover-47 reservoir, or any 47 mm glass sample reservoir
-
Tedlar Sampling Bags
RestekSampling bags are a low-cost, whole-air sampling device for high-level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…
-
SDVB Resin
RestekStyrene/divinylbenzene, equivalent to XAD-2 resin Untreated, packaged in 1 kg plastic containers Spherical, 20 to 60 mesh particles
-
Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…
-
Q-sep Tube Racks
RestekAvailable for 2 mL, 15 mL, and 50 mL tubes Alphanumerical grid reference on top tier for easy identification of samples Easy to assemble; simply fold and snap together securely
-
Sample Inlets
RestekInlets have 1/4" stainless steel compression fitting on each end One end connects to flow controller or canister; nut on other end serves as rain guard Includes nuts and ferrules Two different lengths for use with large canisters and miniature canisters
-
Cleaned, assembled, and ready to use Clear or amber glass Caps and PTFE-lined septa included