Chromatography Sample Preparation
-
QuEChERS methods are fast, easy, and cost-effective, and Restek Q-sep products make QuEChERS procedures even simpler. All extraction salts, sorbents, and sample tubes are included—no specialized equipment or glassware is required. Prepare samples more efficiently with a complete line of…
-
CAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3
-
Restek PAL SPME Fibers
RestekSuitable for a wide range of analyte chemistries and sample matrices Reliable performance meets or exceeds other brands Robust aluminum hub is more durable than plastic Optimized for PAL system autosamplers and compatible with most GC inlets SPME automated sample preparation reduces…
-
1174R53 : Long-term storage of blank/sampled tubes. 1174R54 : Long-term storage caps. 1174R55 : Use for tightening long-term storage caps. 1174R57 : Assists with tube packing. 1174R58 : Use for connecting tubes in series. 1174R59 : Required for diffusive sampling with stainless…
-
Restek's passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* The improved filter design greatly reduces the number of potential leak sites. The passive air sampling kit is available in seven sampling flow ranges and…
-
Cleaned, assembled, and ready to use Clear or amber glass Caps and PTFE-lined septa included
-
Single-stage, stainless steel Two pressure gauges and CGA-180 fitting Stainless steel diaphragm and Kel-F seat Accurate pressure control even at low flow rates Individually tested for leaks and impurities
-
Silica Gel 60 (230-400 Mesh) 25 Kg Silicar
Avantor - Macron Fine Chemicals™For Column Chromatography Grade: SilicAR CAS Number: 63231-67-4 HTS Number: 2811221000 Specific Gravity: 1L = 2.10 Kg Management of Change: N
-
The Restek accessories are compatible to use with Resprep SPE tubes and have a strong polypropylene material that offers great strength and durability.
-
Easy-VOC Grab Sampler
RestekPerfect for fast and simple grab sampling of small air volumes (50–500mL) directly into sorbent tubes* Easy, instant sample collection with no complicated pumps to calibrate or maintain Convenient to use anywhere, just attach a sorbent tube to the end of the handheld unit and draw a…
-
Sample Cylinder Valves
RestekAlta-Robbins' unique valve design incorporates a fully contained soft seat that provides durability and longer lifetime. Tight shut-off is easily achieved with very low torque, yet the valve is rugged enough to withstand overtightening. Multiple valve configurations are available for both…
-
Firm nylon bristle brushes for easy cell cleaning and removal of solid samples Range of sizes to fit all extraction cells for ASE 100, 200, and 300
-
Large Volume SPE Reservoir
MilliporeSigmaRetention Mechanisms: Lipid matrix is retained via normal phase, hydrophobic, and Lewis acid-Lewis base interactions Sample Matrix Compatibility: Oils Dual layer SPE that contains both LC-Florisil® (upper layer) and Z-Sep/C18 (lower layer) SPE sorbents, separated by a PE frit …
-
Canister Air Sampling Timer
RestekThese timers are designed to simplify both automated and manual air sampling. The easy-to-use keypad and graphic display facilitate the programming of up to 12 timed events. They offer the convenience of remote start/stop sampling and permit intermittent sampling throughout a test period. The LCD…
-
Resprep PPT 96-Well Plates
RestekPolypropylene protein precipitation (PPT) 96-well plates offer highly efficient >99% protein removal Minimum 24-hour drip-free feature for easy in-well protein precipitation—no fear of backflushing or contamination Built-in dual-layer membrane with different porosities in each layer…
-
Small Cylinder Stand
RestekThis cylinder stand is designed to support small-diameter cylinders, such as 104L and 110L disposable cylinders. It is a simple, safe, and economical way to stabilize the position of small cylinders, while keeping them within close proximity. The stand is constructed of heavyweight painted steel…
-
Anhydrous sodium sulfate is the most common drying agent used to remove moisture from sample extracts. We package our 10-60 mesh material in recloseable buckets. Ideal for removing water from sample extracts Activate by heating to 400°C for four hours before use Packaged in…
-
Chemker Vacuum Pumps
RestekPTFE wetted parts are highly resistant to corrosive gases Diaphragm-based pump is low maintenance and virtually pollution free Quiet, low-vibration units keep disturbances to a minimum Built-in thermal protector automatically shuts off pump if it overheats and then restarts it once the…
-
These small canisters are designed for controlled sampling, such as personal air sampling, as an alternative to tube and pump samplers. The 1,000 cc canister is suitable for sampling volatile organic compounds in air according to methods TO-14A, TO-15, IP-1A, ASTM 5466, OSHA PV 2120, and NJ DEP Low…
-
Luer lock inlet offers leak-tight syringe connection Variety of filter types, porosities, and diameters Color coded for easy identification Rugged polypropylene housing Autoclavable to 121°C for 15 minutes Quantity break pricing for greater savings Cellulose Acetate, Nylon,…
-
Sampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…
-
Optimized for Methods TO-14A, TO-15, IP-1A, ASTM D5466, OSHA PV 2120, and NJ DEP Low Level TO-15 Proprietary electropolished surface maintains compound stability. High-quality, metal-to-metal seal, 2/3-turn valve with stainless steel diaphragms prevent sample adsorption for more-accurate…
-
Glass fiber disks embedded with C18 or C8 bonded silica Extract semivolatile organic compounds Deep-pore design reduces clogging and allows faster flow rates Meet requirements for EPA Methods 525.1, 506, 550.1, and 549.1 Lower cost than PTFE disks
-
-
Hydrophilic (polar) adsorbents used to extract hydrophilic analytes from nonpolar matrices, such as organic solvents (e.g., polar contaminants from sample extracts). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. …
-
Chromatographic Spray
Ace GlassDelivers a true aerosol with no droplets. Enables thorough brushing for uniform development. Spray action begins at .028m3 per minute air flow. Atomization rate approximately 10cc per minute. Easily controlled with thumb pressure on vent hole. Suction stem is 125mm long.
-
47 mm glass fiber disks embedded with specialty bonded silica Meet requirements for EPA Method 1664.* Reduce emulsion formation and amount of solvent required by previous EPA methods No chlorofluorocarbons needed *A sodium sulfate drying tube (cat.# 26207) and a 0.45 µm PTFE…
-
Q-sep Tube Racks
RestekAvailable for 2 mL, 15 mL, and 50 mL tubes Alphanumerical grid reference on top tier for easy identification of samples Easy to assemble; simply fold and snap together securely
-
Allows switching from pressure to vacuum in a matter of seconds. Quiet, oil-free unit will not contaminate the extraction system or your samples. Provides 20" Hg (68 kPa) vacuum or 18 psi (124 kPa) pressure. Not recommended for use with 24-port manifold. Warranty period is one year from…
-
Metering Control Valves
RestekReduces pressure between sample cylinder and GC injector Maintains fine metering control Contains Kel-F seat
-
Accurately and precisely dispense liquids for QuEChERS extractions with this versatile pump. A quick, simple adjustment lets you set the output volume anywhere from 2.5 mL to 30 mL per stroke, and the included adaptors will accommodate most reagent bottles. Adjustment knob offers 56 output…