Salts, Bottle, Glass
-
Ammonium Acetate, Ultra Pure
MP BiomedicalsAmmonium acetate is a chemical compound which is derived from the reaction of ammonia and acetic acid. Ammonium acetate is volatile at low pressures. Because of which it has been used to replace cell buffers with non-volatile salts, in preparing samples for mass spectrometry. It is used as a buffer…
-
-
Grade: Reag. Ph Eur CAS No.: 4338-98-1 pH: 3 - 4 (4 g/l, H2O, 20°C) Solubility: (20°C) slightly soluble Molar Mass: 215.71 g/mol Bulk Density: 748 kg/m3 Hill Formula: C8H10ClN3S
-
Diphenylamine-4-Sulfonic Acid Barium Salt Redox Indicator
MilliporeSigmaCAS No.: 6211-24-1 pH: 5.9 (10 g/l, H2O, 20°C) (slurry) Solubility: (20°C) soluble Melting Point: 300°C Molar Mass: 633.88 g/mol Bulk Density: 220 kg/m3 Hill Formula: C24H20BaN2O6S2
-
Rhodizonic acid disodium salt, 98%
BeanTown ChemicalCAS: 523-21-7 EC No: 208-340-3 MDL No: MFCD00001650 Powder Molecular Formula: C6Na2O6 MW: 214.04 Melting Point: >300°
-
1-Naphthol Gr For Analysis
MilliporeSigmaFormula: C10H7OH CAS No.: 90-15-3 Solubility: 0.1 g/l (20°C) Melting Point: 94 - 96°C Molar Mass: 144.17 g/mol Bulk Density: 450 kg/m3 Boiling Point: 288°C (1013 hPa) Vapor Pressure: 1.3 hPa (94°C) Flash Point: 125°C Density: 1.28 g/cm3 (20°C) Ignition Point: 510°C …
-
Dodecane-1-Sulfonic Acid Sodium Salt For Tenside Tests
MilliporeSigmaCAS No.: 2386-53-0 pH: 5.5 - 7.5 (100 g/l, H2O, 20°C) Solubility: (20°C) soluble Molar Mass: 272.37 g/mol Bulk Density: 330 kg/m3 Hill Formula: C12H25NaO3S
-
Fluorescein disodium salt
BeanTown ChemicalCAS: 518-47-8 EC No: 208-253-0 MDL No: MFCD00167039 RTECS: LM5425000 Powder Molecular Formula: C20H10Na2O5 MW: 376.28
-
Grade: ACS, Reag. Ph Eur CAS No.: 5808-22-0 pH: 3.6 (10 g/l, H2O, 20°C) Solubility: 170 g/l (20°C) Melting Point: >300°C Molar Mass: 400.30 g/mol Bulk Density: 780 kg/m3 Hill Formula: C10H6Na2O8S2 * 2 H2O
-
Aluminum Sulfate Hydrate
MP BiomedicalsAluminum sulfate hydrate is a hydrated aluminum salt. Aluminum sulfate is widely used in oil and fat processing, paper manufacturing and as a flocculant for water treatment. The kinetics of its dehydration by thermal decomposition has been investigated. It is one of the components of hematoxylin…
-
Sodium tetraphenylborate, ACS, 99.5% min.
BeanTown ChemicalCAS: 143-66-8 EC No: 205-605-5 MDL No: MFCD00011494 RTECS: ED3362500 UN No: UN2811; Haz Class: 6.1; Packing Group: III Solid Linear Formula: (C6H5)4BNa MW: 342.23 Melting Point: >300°
-
Sodium Perchlorate, Monohydrate
MP BiomedicalsSodium Perchlorate Monohydrate is used in standard DNA extraction and hybridization reactions in molecular biology.
-
Grade: ACS CAS No.: 366-18-7 pH: 7.5 (5 g/l, H2O, 25°C) Solubility: 5.5 g/l (22°C) Melting Point: 70 - 72°C Molar Mass: 156.18 g/mol Bulk Density: 500 kg/m3 Boiling Point: 272°C (1013 hPa) Flash Point: 121°C Hill Formula: C10H8N2
-
Potassium Iodide
MP BiomedicalsPotassium Iodide is known as Potassium Salt of Hydriodic Acid [HI]. Its Ionic form is K+ I-, and iodide ion being mild reducing agent, it can be easily oxidized to Iodine by powerful oxidizing agent like chlorine. Potassium iodide is often used as a fluorescence quencher. The use of KI to…
-
Sodium ethyl-2-sulfolaurate
BeanTown ChemicalCAS: 7381-01-3 EC No: 230-949-8 Solid Molecular Formula: C14H27NaO5S MW: 330.42
-
Dichloroisocyanuric Acid Sodium Salt Dihydrate
MilliporeSigmaCAS No.: 51580-86-0 pH: 6.7 (10 g/l, H2O, 20°C) Solubility: 250 g/l (25°C) Melting Point: 240 - 250°C (decomposition) Molar Mass: 255.98 g/mol Bulk Density: 980 kg/m3 Hill Formula: C3Cl2N3NaO3 * 2 H2O
-
Platinum(II) acetylacetonate
BeanTown ChemicalCAS: 15170-57-7 EC No: 239-223-5 MDL No: MFCD00000028 Needles Linear Formula: Pt(C5H7O2)2 MW: 393.30 Melting Point: 249-252°
-
Potassium Iodide
MP BiomedicalsPotassium Iodide is known as Potassium Salt of Hydriodic Acid [HI], available in white crystalline powder form. It is a mild reducing agent and can be easily oxidized to Iodine by powerful oxidizing agent like chlorine. With elemental iodine it forms I3 (tri iodide), the salts of tri iodide are…
-
Diphenylamine-4-sulfonic acid sodium salt, 98%
BeanTown ChemicalCAS: 6152-67-6 MDL No: MFCD00036468 Powder Molecular Formula: C12H10NNaO3S MW: 271.27
-
Diantipyrylmethane Gr For Analysis (Reagent For Titanium)
MilliporeSigmaCAS No.: 1251-85-0 Solubility: 0.431 g/l (25°C) (experimental) Melting Point: 179 - 182°C Molar Mass: 388.46 g/mol Bulk Density: 430 kg/m3 Hill Formula: C23H24N4O2
-
Sodium Metabisulfite
MP BiomedicalsSodium metabisulfite is an antioxidant reducing agent, with antimicrobial and antifungal properties. Gastric tissue studies report that sodium metabisulfite can augment lipid peroxidation and apoptosis in a dose-dependent manner. Sodium metabisulfite is used as an active ingredient in campden…
-
Sodium Sulfide Nonahydrate
MP BiomedicalsSodium sulfide is used in the formation of surface functionalized cadmium sulfide quantum dots.
-
Lithium Chloride
MP BiomedicalsUsed as an electrolyte for low temperature dry battery cells and as an oxidation catalyst. It is a solubilizer for polyamides and cellulose when used with amide solvents, and is a chlorinating agent for steroid substrates. Lithium chloride has also been utilized in: Large scale plasmid DNA…
-
Potassium Phosphate Monobasic
MP BiomedicalsPotassium phosphate is a reagent with high buffering capacity. It occurs in several forms: monobasic, dibasic, and tribasic (K3PO4). Most pH neutral potassium phosphate buffer solutions consist of mixtures of the monobasic and dibasic forms to varying degrees, depending on the…
-
Potassium Ferrocyanide Trihydrate
MP BiomedicalsPotassium ferrocyanide trihydrate is a salt of the Fe(CN)64- ferrocyanide ion. Ferrocyanide is a reducing iron species, being oxidized from ferrous Fe(II) to ferric Fe(III). Potassium ferrocyanide is used to determine the concentration of potassium permanganate, a compound often used in…
-
Zinc Chloride
MP BiomedicalsZinc chloride is a widely used reagent in various industrial processes. These include textile finishing, the etching of metals, the manufacture of parchment paper, and the preparation of galvanizing, soldering, and tinning fluxes. Zinc chloride is also used in organic chemical synthesis, such as in…
-
CAS No.: 51580-86-0 pH: 6.7 (10 g/l, H2O, 20°C) Solubility: 250 g/l (25°C) Melting Point: 240 - 250°C (decomposition) Molar Mass: 255.98 g/mol Bulk Density: 980 kg/m3 Hill Formula: C3Cl2N3NaO3 * 2 H2O
-
Grade: ACS CAS No.: 569-58-4 pH: 5.3 (10 g/l, H2O, 20°C) Solubility: 800 g/l (20°C) Melting Point: 220 - 225°C decomposes Molar Mass: 473.44 g/mol Bulk Density: 400 kg/m3 Hill Formula: C22H23N3O9
-
Sodium L-lactate, 98%
BeanTown ChemicalCAS: 867-56-1 EC No: 212-762-3 MDL No: MFCD00066576 Crystalline Molecular Formula: C3H5NaO3 MW: 112.06 Melting Point: 163-165°
-
Potassium Phosphate Dibasic Trihydrate
MP BiomedicalsPotassium phosphate is a reagent with high buffering capacity. It occurs in several forms: monobasic, dibasic, and tribasic (K3PO4). Most pH neutral potassium phosphate buffer solutions consist of mixtures of the monobasic and dibasic forms to varying degrees, depending on the desired pH. …
-
Ferric Chloride
MP BiomedicalsFerric chloride is a moderately strong Lewis acid and it is used as a catalyst in organic synthesis. The vapor-phase co-reductions with other metal halides by hydrogen results in finely divided intermetallics with applications as structural materials or compounds with useful thermoelectric,…
-
Potassium Sodium Tartrate Tetrahydrate
MP BiomedicalsPotassium sodium tartrate is a double salt. Potassium sodium tartrate tetrahydrate has been used in organic synthesis to break up emulsions in aqueous workups. The compound is an ingredient of Fehling’s solution and Biuret reagent and is used in detection of aldose and ketose functional…