Salts, ACS, 1 kg
-
Nickel(II) Sulfate Hexahydrate For Analysis EMSURE® ACS
MilliporeSigmaFormula: NiSO4 * 6 H2O Grade: ACS CAS No.: 10101-97-0 pH: 4.3 - 4.7 (100 g/l, H2O, 20°C) Solubility: 650 g/l (20°C) Melting Point: 53°C Molar Mass: 262.86 g/mol Bulk Density: 1000 kg/m3 Density: 2.07 g/cm3 (20°C) Hill Formula: NiO4S * 6 H2O
-
Sodium Chloride
MP BiomedicalsSodium chloride is a commonly used chemical which is found widely in nature. It is considered to be an essential nutrient. Excess amounts of sodium chloride can destroy electrolyte balance and cause death in most animals, including humans. Sodium chloride is used in a wide variety of biochemical…
-
Calcium Chloride
MP BiomedicalsCalcium chloride (CaCl2) is inexpensive, easily available calcium salt with a wide range of applications. It is a key component in deicers as it melts snow and ice. Reports suggest that CaCl2 helps in retaining the firmness of fresh cut fruits and vegetables during storage. Calcium chloride may…
-
Sodium acetate, anhydrous, ACS, 99.0% min.
BeanTown ChemicalCAS: 127-09-3 EC No: 204-823-8 MDL No: MFCD00012459 RTECS: AJ4300010 Crystalline/Powder Linear Formula: CH3COONa MW: 82.03 Melting Point: 300° Flash Point: >250°C (>482°F) Density (g/mL): 1.528
-
-
Formula: (NH4)6Mo7O24 * 4 H2O Grade: ACS, ISO, Reag. Ph Eur CAS No.: 12054-85-2 pH: 5.3 (50 g/l, H2O, 20°C) Solubility: 400 g/l (20°C) Melting Point: 90°C Elimination of water of crystallisation Molar Mass: 1235.86 g/mol Bulk Density: 800 kg/m3 Density: 2.498 g/cm3 (20°C) …
-
Formula: (CH3COO)2Pb * Pb(OH)2 Grade: ACS CAS No.: 51404-69-4 pH: 7.2 (50 g/l, H2O, 20°C) Solubility: (20°C) soluble Molar Mass: 566.50 g/mol Bulk Density: 2100 kg/m3 Hill Formula: C4H8O6Pb2
-
Sodium Bicarbonate
MP BiomedicalsSodium bicarbonate is a commonly used laboratory chemical. The compound can react with both acids and bases, therefore it can be used as a neutralizer. When reacting with bases the compound forms carbonates. Sodium bicarbonate may be used to remove or wash acidic impurities from a crude liquid to…
-
Sodium Phosphate, Monobasic, Monohydrate
MP BiomedicalsSodium phosphate is a reagent with very high buffering capacity that is widely used in molecular biology, biochemistry, and chromatography. Sodium phosphate occurs in several forms: monobasic (NaH2PO4), dibasic (Na2HPO4), and tribasic (Na3PO4). Most neutral sodium phosphate buffer solutions consist…
-
Mercury(II) Chloride For Analysis Reagent Ph Eur,ACS
MilliporeSigmaFormula: HgCl2 Grade: Reag. Ph Eur, ACS CAS No.: 7487-94-7 pH: 3.2 (15 g/l, H2O) Solubility: 74 g/l (20°C) Melting Point: 280.7°C Molar Mass: 271.5 g/mol Bulk Density: 2000 kg/m3 Boiling Point: 302°C (1013 hPa) (sublimed) Vapor Pressure: 0.0001 hPa (20°C) Density: …
-
Zinc acetate dihydrate, ACS, 98.0-101.0%
BeanTown ChemicalCAS: 5970-45-6 EC No: 209-170-2 MDL No: MFCD00066961 RTECS: ZG8750000 UN No: UN3077; Haz Class: 9; Packing Group: III Powder Linear Formula: Zn(CH3COO)2·2H2O MW: 219.50 Melting Point: 237° Density (g/mL): 1.84
-
Potassium hydrogen phthalate, primary standard, ACS, 99.95-100.05%
BeanTown ChemicalCAS: 877-24-7 EC No: 212-889-4 MDL No: MFCD00013070 RTECS: CZ4326000 Crystalline/Powder Molecular Formula: C8H5KO4 MW: 204.23 Melting Point: 295-300° (decomposes) Density (g/mL): 1.636
-
Nickel(II) Chloride Hexahydrate For Analysis EMSURE® ACS
MilliporeSigmaFormula: NiCl2 * 6 H2O Grade: ACS CAS No.: 7791-20-0 pH: 4.9 (100 g/l, H2O, 20°C) Solubility: 553 g/l (20°C) Melting Point: 1001°C (anhydrous substance),decomposes Molar Mass: 237.66 g/mol Bulk Density: 640 kg/m3 Boiling Point: 987°C (sublimed),(anhydrous substance) Hill…
-
Calcium Sulfate Dihydrate
MP BiomedicalsCalcium sulfate (or calcium sulphate) is a common laboratory and industrial chemical. Calcium sulfate is used in tile and plaster, polishing powders, paints, paper, dyeing and calico printing, metallurgy, drying industrial gases, solids, and many organic liquids, and in the determination of oxalates.
-
Magnesium Sulfate Heptahydrate
MP BiomedicalsComponent of Hanks′ balanced salt solution Component of plant cell-culture media and of culture media for microorganisms Purification of CAP, catabolite gene activator In the preparation of spheroplasts from E. coli K38
-
Formula: K2Cr2O7 Grade: ACS, ISO, Reag. Ph Eur CAS No.: 7778-50-9 pH: 3.6 (100 g/l, H2O) Solubility: 130 g/l (20°C) Melting Point: 398°C Molar Mass: 294.19 g/mol Bulk Density: 1250 kg/m3 Boiling Point: >500°C (1013 hPa) Density: 2.69 g/cm3 (20°C) Hill Formula: Cr2K2O7
-
Ammonium Sulfate
MP BiomedicalsAmmonium sulfate is an inorganic salt. Ammonium Sulfate may be used for the precipitation or fractionation of proteins or for purification of antibodies. Useful for crystallographic analysis of nucleic acids and proteins. The use of ammonium sulfate in long PCR buffer, in PCR lysis solution, and…
-
Sodium Phosphate, Dibasic, Heptahydrate - na2hpo4 7h2o
MP BiomedicalsSodium phosphate dibasic heptahydrate is a reagent with very high buffering capacity widely used in molecular biology, biochemistry and chromatography. Sodium phosphate dibasic is highly hygroscopic and water soluble. Useful in conjunction with Sodium Phosphate, Monobasic in the preparation of…
-
Magnesium Chloride Hexahydrate
MP BiomedicalsMagnesium chloride hexahydrate (MgCl2·6H2O) is an inorganic salt that can be generated from the acid leach solution of magnesite tailings. It is a potential phase change material (PCM) for storing thermal energy in solar cookers. The result of altering poly (vinyl alcohol)(PVA) films with…
-
Nickel(II) Nitrate Hexahydrate For Analysis EMSURE® ACS
MilliporeSigmaFormula: Ni(NO3)2 * 6 H2O Grade: ACS CAS No.: 13478-00-7 pH: 5 (50 g/l, H2O, 20°C) Solubility: 940 g/l (20°C) Melting Point: 56.7°C Molar Mass: 290.81 g/mol Bulk Density: 800 kg/m3 Boiling Point: 136.7°C (1013 hPa) Density: 2.05 g/cm3 (20°C) Hill Formula: N2NiO6 * 6 H2O
-
Ricca Sodium Hydroxide (Pellets)
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Sodium Metabisulfite
MP BiomedicalsSodium metabisulfite is an antioxidant reducing agent, with antimicrobial and antifungal properties. Gastric tissue studies report that sodium metabisulfite can augment lipid peroxidation and apoptosis in a dose-dependent manner. Sodium metabisulfite is used as an active ingredient in campden…
-
Lead(II) Nitrate For Analysis EMSURE® ACS, Reagent Ph Eur
MilliporeSigmaFormula: Pb(NO3)2 Grade: ACS, Reag. Ph Eur CAS No.: 10099-74-8 pH: 3 - 4 (50 g/l, H2O, 20°C) Solubility: 522 g/l (20°C) Melting Point: 458 - 459°C Molar Mass: 331.2 g/mol Bulk Density: 1850 kg/m3 Vapor Pressure: (20°C) Density: 4.49 g/cm3 (20°C) Hill Formula: N2O6Pb
-
Potassium Chloride
MP BiomedicalsPotassium chloride is a widely used reagent in biochemistry and molecular biology. Potassium chloride is a salt commonly used in the preparation of phosphate buffered saline and for the extraction and solubilization of proteins. It is a good potassium source. Also used in the hypotonic…
-
Zinc Chloride
MP BiomedicalsZinc chloride is a widely used reagent in various industrial processes. These include textile finishing, the etching of metals, the manufacture of parchment paper, and the preparation of galvanizing, soldering, and tinning fluxes. Zinc chloride is also used in organic chemical synthesis, such as in…
-
-
Potassium Bromide
MP BiomedicalsPotassium bromide may be used for removal of peripheral membrane proteins. Potassium bromide is a chemical salt that has been used in a variety of applications such as spectroscopy, infrared transmission, as a laboratory reagent. Used as bromine source in greener bromination of 1,3-dicarbonyl compounds.
-
Barium acetate, ACS, 99.0-102.0%
BeanTown ChemicalCAS: 543-80-6 EC No: 208-849-0 MDL No: MFCD00012447 UN No: UN1564; Haz Class: 6.1; Packing Group: III Crystalline Linear Formula: Ba(OOCCH3)2 MW: 255.42
-
Sodium Dichromate Dihydrate For Analysis EMSURE® ACS
MilliporeSigmaFormula: Na2Cr2O7 * 2 H2O Grade: ACS CAS No.: 7789-12-0 pH: 3.5 (100 g/l, H2O, 20°C) Solubility: 731.8 g/l (20°C) Melting Point: 356.7°C (anhydrous substance) Molar Mass: 298.00 g/mol Bulk Density: 1200 kg/m3 Boiling Point: 400°C (decomposition) Density: 2.35 g/cm3…