Salts, ACS
-
-
Mercury(II) Acetate For Analysis ACS, Reagent Ph Eur
MilliporeSigmaFormula: Hg(CH3COO)2 Grade: ACS, Reag. Ph Eur CAS No.: 1600-27-7 Solubility: 400 g/l (20°C) Melting Point: 178 - 180°C (decomposition) Molar Mass: 318.68 g/mol Bulk Density: 1000 kg/m3 Density: 3.27 g/cm3 (20°C) Hill Formula: C4H6HgO4
-
Potassium Chloride
MP BiomedicalsPotassium chloride is a widely used reagent in biochemistry and molecular biology. Potassium chloride is a salt commonly used in the preparation of phosphate buffered saline and for the extraction and solubilization of proteins. It is a good potassium source. Also used in the hypotonic…
-
Lanthanum Chloride, Hydrated
MP BiomedicalsLanthanum chloride is used to precipitate phosphate from solutions. Lanthanum chloride is also used in biochemical research to block the activity of divalent cation channels, mainly calcium channels. Calcium channel blocker.
-
Lead(II) Nitrate For Analysis EMSURE® ACS, Reagent Ph Eur
MilliporeSigmaFormula: Pb(NO3)2 Grade: ACS, Reag. Ph Eur CAS No.: 10099-74-8 pH: 3 - 4 (50 g/l, H2O, 20°C) Solubility: 522 g/l (20°C) Melting Point: 458 - 459°C Molar Mass: 331.2 g/mol Bulk Density: 1850 kg/m3 Vapor Pressure: (20°C) Density: 4.49 g/cm3 (20°C) Hill Formula: N2O6Pb
-
Calcium Sulfate Dihydrate
MP BiomedicalsCalcium sulfate (or calcium sulphate) is a common laboratory and industrial chemical. Calcium sulfate is used in tile and plaster, polishing powders, paints, paper, dyeing and calico printing, metallurgy, drying industrial gases, solids, and many organic liquids, and in the determination of oxalates.
-
-
-
Grade: ACS CAS No.: 569-58-4 pH: 5.3 (10 g/l, H2O, 20°C) Solubility: 800 g/l (20°C) Melting Point: 220 - 225°C decomposes Molar Mass: 473.44 g/mol Bulk Density: 400 kg/m3 Hill Formula: C22H23N3O9
-
Formula: (CH3COO)2Pb * 3 H2O Grade: ACS, Reag. Ph Eur CAS No.: 6080-56-4 pH: 5.5 - 6.5 (50 g/l, H2O, 20°C) Solubility: 443 g/l (20°C) Melting Point: 75°C Molar Mass: 379.34 g/mol Bulk Density: 1200 kg/m3 …
-
Potassium antimonyl tartrate trihydrate, ACS, 99.0-103.0%
BeanTown ChemicalCAS: 28300-74-5 EC No: 229-436-1 MDL No: MFCD00148863 RTECS: CC6825000 UN No: UN1551; Haz Class: 6.1; Packing Group: III Powder Molecular Formula: C8H4K2O12Sb2·3H2O MW: 667.87 Melting Point: >300°
-
-
-
Ammonium Sulfate
MP BiomedicalsAmmonium sulfate is an inorganic salt. Ammonium Sulfate may be used for the precipitation or fractionation of proteins or for purification of antibodies. Useful for crystallographic analysis of nucleic acids and proteins. The use of ammonium sulfate in long PCR buffer, in PCR lysis solution, and…
-
Nickel(II) Sulfate Hexahydrate For Analysis EMSURE® ACS
MilliporeSigmaFormula: NiSO4 * 6 H2O Grade: ACS CAS No.: 10101-97-0 pH: 4.3 - 4.7 (100 g/l, H2O, 20°C) Solubility: 650 g/l (20°C) Melting Point: 53°C Molar Mass: 262.86 g/mol Bulk Density: 1000 kg/m3 Density: 2.07 g/cm3 (20°C) Hill Formula: NiO4S * 6 H2O
-
Formula: (NH4)6Mo7O24 * 4 H2O Grade: ACS, ISO, Reag. Ph Eur CAS No.: 12054-85-2 pH: 5.3 (50 g/l, H2O, 20°C) Solubility: 400 g/l (20°C) Melting Point: 90°C Elimination of water of crystallisation Molar Mass: 1235.86 g/mol Bulk Density: 800 kg/m3 Density: 2.498 g/cm3 (20°C) …
-
-
Sodium Metabisulfite
MP BiomedicalsSodium metabisulfite is an antioxidant reducing agent, with antimicrobial and antifungal properties. Gastric tissue studies report that sodium metabisulfite can augment lipid peroxidation and apoptosis in a dose-dependent manner. Sodium metabisulfite is used as an active ingredient in campden…
-
Stannous Chloride, Dihydrate Reagent (ACS)
GFS ChemicalsSnCl2•2H2O CAS#: 10025-69-1 F.W.: 225.63 NFPA#: 2-0-1 Specific Gravity: 0.000 DOT: 8/III
-
8-Hydroxyquinoline Gr For Analysis ACS, Reagent Ph Eur
MilliporeSigmaGrade: ACS, Reag. Ph Eur CAS No.: 148-24-3 Solubility: 0.56 g/l (20°C) Melting Point: 72.5 - 74.0°C Molar Mass: 145.16 g/mol Boiling Point: 267°C (1013 hPa) Hill Formula: C9H7NO
-
-
-
-
Formula: MnSO4 * H2O Grade: ACS, Reag. Ph Eur CAS No.: 10034-96-5 pH: 3.0 - 3.5 (50 g/l, H2O, 20°C) Solubility: 762 g/l (20°C) Melting Point: 700°C (anhydrous substance) Molar Mass: 169.02 g/mol Bulk Density: 1000 - 1200 kg/m3 Density: 2.95 g/cm3 (20°C) Hill Formula: …
-
-
-
Potassium Ferricyanide
MP BiomedicalsPotassium ferricyanide is the chemical compound with the formula K3[Fe(CN)6]. This bright red salt contains the octahedrally coordinated [Fe(CN)6]3- ion. It is soluble in water and its solution shows some green-yellow fluorescence. Potassium ferricyanide is used as an oxidizing agent to remove…
-
-
Sodium Bicarbonate
MP BiomedicalsSodium bicarbonate is a commonly used laboratory chemical. The compound can react with both acids and bases, therefore it can be used as a neutralizer. When reacting with bases the compound forms carbonates. Sodium bicarbonate may be used to remove or wash acidic impurities from a crude liquid to…
-
-
Sodium Chloride
MP BiomedicalsSodium chloride is a commonly used chemical which is found widely in nature. It is considered to be an essential nutrient. Excess amounts of sodium chloride can destroy electrolyte balance and cause death in most animals, including humans. Sodium chloride is used in a wide variety of biochemical…
-
Sodium Perchlorate, Monohydrate
MP BiomedicalsSodium Perchlorate Monohydrate is used in standard DNA extraction and hybridization reactions in molecular biology.