Chemglass Reaction Vessels & Flasks
-
Cylindrical shaped tube, similar to AF-0537 but with an standard taper inner joint, useful for simple reactions. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.
-
Jacketed large scale process reaction vessels. The 50 and 100L vessels have a 400mm ID flat ground flange. The inlet/outlet of the vessels are beaded pipe fittings for use with the CG-1964 and CG-1969-A beaded pipe adapters. Reactors have a 3"; beaded pipe valve that is detachable. These flush…
-
Tool Set, Process Reactors
ChemglassPrecision crafted 17-piece tool set which includes a variety of tools to handle basic assembly, repair and maintenance on process reactor systems. Includes 1 each of the following: CG-1963-B-40 Plastic Tool Box, 19" W x 10" D x 9" H. …
-
30L Process Reactor System
ChemglassComplete reactor system on our NEW open air stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can…
-
Cylindrical shaped tube useful for storage or simple reactions. Tube has a standard taper outer joint. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.
-
Unjacketed Filter Vessel Body Only
ChemglassCylindrical filter reaction vessel body constructed with a top flange having a groove formed in the sealing surface of the flange and a flat ground flange on the bottom. Bottom flange is for connection to a CG-1949-F/CG-1959-F style filter bases. Top flange is compatible with any of the lids…
-
100L Tall Glass Reactor System
Chemglass100L Tall glass reactor system with 400mm flange on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Tall Reactor System Features: Wider Access: 400mm ID Flange Provides…
-
This fluid driven Spray Ball gives nearly 360° spray coverage and is a convenient way to clean Chemglass 10 thru 100L glass reactors without dismantling the entire setup. It can also be used as a wall wetter. Spray ball is constructed of PTFE, the removable PTFE clip allows the…
-
Reaction Vessel Lids, 6-Necks, 200mm
ChemglassSix-Neck lid for 200mm flanged vessel. Lid has 45/50 center neck, four 45/50 side necks and a 60mm angled flange for powder addition. PLEASE NOTE: 60MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.
-
Adapters, Pressure Vessel
ChemglassAdapter permits rotary evaporation of the contents of any of our CG-1880 pressure vessels after the reaction is complete. Adapter can also be connected to any vacuum line having a 24/40 port or used in conjunction with a CG-1014 adapter to connect to hoses. Eliminates the need to transfer samples…
-
PTFE Baffle Cage, 4-Blade
ChemglassPTFE Baffle Cage, 4-Blade, 100mm ID Flange, for 1,000mL Vessel. PTFE insertable 4-blade baffle cage system for CG-1929-X series 100 and 150mm reactor systems. Baffle assembly has 4ea PTFE rectangular baffles attached 90 degrees apart to a 100 or 150mm flange ring. Flange ring is inserted between…
-
Reaction Vessel Lid, S.S., 400mm, 7-Neck
ChemglassReaction vessel lid is constructed of 1/4"; thick #316 S.S. with a 1/8"; thick PTFE gasket underneath. The only material exposed to the reaction is PTFE. Lid has seven openings that accept 45/50 outer PTFE inserts. One neck is a bulk addition port is 80mm reaction flange with o-ring…
-
Reaction Vessels, Spherical, Morton Type
ChemglassSpherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel…
-
For use with unjacketed cylindrical reaction vessels with a 200mm ID or 300mm ID flange. Coil can be used to cool or heat the contents of a vessel. Fabricated from #304 S.S. tubing with a green PFA coating that is electrically tested to insure complete coverage. This method of manufacture provides…
-
Shielded Reactor Support Frames
ChemglassFeatures: Rugged S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability All S.S. Uprights are Passivated to Inhibit Corrosion All S.S. Uprights are Passivated to Inhibit Corrosion Universal “H” Shaped Motor Mount for…
-
Unique baffle system for benchtop process reactors from 300mL to 5L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. PTFE jacketed stainless steel provides excellent strength and chemical durability. Features: Adjustable Rectangular…
-
Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…
-
Similar to CG-1930, but with morton indentations to increase agitation during stirring. Supplied complete with two polypropylene hose connections and two screw caps. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum
-
10L Process Reactor Sytems
ChemglassComplete reactor system on our NEW open air, auto-center stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…
-
Reaction Vessel Lids, 4-Necks
ChemglassFour neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30° angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
Reaction Vessel Lids, PTFE, 200mm
ChemglassReaction vessel lid is constructed entirely of PTFE. Low-form lid has eight openings: (A) center neck 1"; female NPT for PTFE standard taper adapter, (B) side necks 1-1/2"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10°; X 10°…
-
Cylindrical shaped tube useful for storage or simple reactions with a standard taper outer joint at the top and a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from tube while a purge of inert gas is maintained through the sidearm. Valve size is as listed.
-
Reaction Vessel Lid, 7-Neck, 300mm
Chemglass7-Neck reaction vessel lid for 300mm flanged vessels. Lid has a CN 45/50, 5-SN 45/50, and 1-SN 80mm Duran o-ring flange angled for powder addition. PLEASE NOTE: 80MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY. *** PLEASE NOTE: THE ANGLED POWDER ADDITION PORT IS NOW 80MM AND NOT…
-
75L Process Reactor Sytems
ChemglassComplete reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED USING THE CG-2077-H STIRRER BEARING. IF YOU…
-
Our unjacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…
-
Adapters, Beaded Pipe, Stainless Steel
ChemglassStainless steel transistion adapter from beaded pipe on the inlet/outlet of the reactor to M16 x 1 or M30 x 1.5 male. Used to connect fluid transfer hose to the vessel. Adapters require the beaded pipe couplings for connection to the vessel. Two are required per reactor.
-
Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…
-
Reaction Vessel Lids, 3-Necks
ChemglassThree neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space Perfluoro O-Rings on Tip and Plunger. …
-
Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Four side necks are vertical and one neck has a 10°; degree angle. Angled side neck is designed for use with CG-1235 angled distillation adapters. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
Storage vessel with a #15 o-ring joint on the sidearm and a Chem-Vacé; Chem-Cap®; valve to control gas or liquid flow into the vessel. Vessels are constructed of medium wall tubing and are used with AF-0060 and AF-0061 manifolds or any other Airfree®; component with a #15 o-ring…
-
Reactor Support Frame
ChemglassFeatures: Oversized Rugged 1" S.S. Pipe (1.315" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. All S.S. Uprights are Passivated to Inhibit Corrosion. Improved Support Clamp Auto-Centers Reactor and Lid,…