Racks, Bottles, Tube
-
-
Floating Foam Tube Racks
Heathrow ScientificFloat in small baths as well as large vessels Brightly-colored, high-density polyethylene foam racks are ideal for floating tubes in water baths, tubs, or beakers. Closed-cell foam resists water absorption so racks can be washed and reused. The blue round rack features unique…
-
In-Line Test Tube Rack
SP Bel-ArtFor high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly
-
Holds two sizes of conical bottom tubes Polystyrene foam racks are designed to hold Corning 15 and 50 mL conical bottom plastic centrifuge tubes in the same rack.
-
Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 18 each 0.5 ml microcentrifuge tubes, 7.5 mm in diameter Overall…
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Wireless Tube Racks, Half Size
Globe ScientificFully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
labForce® Benchtop Tube Racks and Storage Boxes
labForce® (powered by Thomas Scientific)labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations. Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.
-
Abdos Twisty Tube Rack, PP (Blue + Purple)
Foxx Life SciencesThese Twisty Tube racks made of Polypropylene (PP) make dilution and concentration study easier as it can transfer samples between 0.2ml PCR tubes to 0.5, 1.5 and 2.0ml tubes. Can be rotated and customized according to end-user application. These racks have tapered wells that securely suspend tubes…
-
Test Tube Peg Racks
Globe ScientificFully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…
-
Microtube Storage Box
Thermo Scientific NalgeneBottom is of white polycarbonate with a permanent foam insert; lid is of clear polycarbonate Insert can accommodate up to fifty 1.5 mL microtubes. Usable temperature range -150° to +121°C. Gridded lid permits easy inventory control and can be written on with marker for box and tube…
-
Tube Rack
MTC BioThese compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…
-
Rack Tube Conical 50mL 28mm 4 Pos
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 4 conical 50 mL tubes
-
Leighton Tube Rack
Bellco GlassFor leighton type tissue tubes. Hinged front of rack locks tubes into position. Specifications: Tube Lengths: 125mm-150mm Tubes Per Rack: 36
-
Tube Racks
MTC BioMTC Bio’s benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. No. R1030 is a 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is…
-
Sedimentation Tube Racks with Leveling Bubbles and Adjustment Screws
DWK Life Sciences (Kimble)10 Place Erythrocyte Sedimentation Rate (ESR) Tube Rack for Westergren and Wintrobe Tubes
-
-
-
PLASTIC TEST TUBE RACK, ROUND, 24-TUBE
United Scientific SuppliesGood quality round test tube rack will hold 24 tubes up to 20mm in diameter. Solid high-impact plastic construction. Rack is 145mm in diameter and 70mm high, and features a perforated bottom. Shipped preassembled.
-
2D Tube Rack SAFE
LVL technologies2D Tube Rack SAFE side coded internal thread 980µl cap LIME Beta Sterile slide lock 10 racks per case; 50case
-
Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …
-
Labcon 80-Place Rack Hinged Storage Box. For use with 80-place storage racks this box is autoclavable (122°C) and freezable (-80°C). Made of polypropylene. With hinged clear lid For use with 80 place tube racks Accepts one 80 place rack for freezer storage Freezable to…
-
Color Comparison Tube Rack
SP Bel-ArtColor Comparison Tests Just Became Easier Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read. Useful for drying or storing test tubes Holds six, 25mm or eight, 18mm tubes; includes six drying pins Steam…
-
TEST TUBE RACK SET, PLASTIC TUBES
United Scientific SuppliesThis set contains twelve 15ml screw top graduated plastic tubes and a brightly colored two tiered test tube stand.
-
Scienceware® 50mL Tube Holders
SP Bel-ArtPolystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top
-
Snap Cap Tube Rack
ClickBioIntended to allow reproducible and secure positioning of 1.5, 2.0, and 5.0 mL microcentrifuge tubes in automation workflows. The tube is held securely in the open position, with the cap located in the adjacent slot to prevent interference. Two models available: 1.5 and 2.0 mL version holds 24 tubes…
-
-
Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…
-
Poxygrid® 500mL Centrifuge Tube Racks
SP Bel-ArtKeeps 500mL Centrifuge Tubes Upright and Secure This unique steel wire rack allows storage and transport of up to four (4) 500mL conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature…