Pipets

Compare Tool

Select up to 3 products

1 - 32 of 35
Sort
View
Show
  • Serological Pipet, KIMAX-51, Color-Coded

    DWK Life Sciences (Kimble)

    Pipet, Color-Coded With Fused Scale Made from uniform-bore N51A tubing Designed from ASTM Specification E 1293, Style 1, Class B requirements Graduated between points above Safe-Gard tempered tip 50 mL size is not color-coded; calibrated to deliver Tolerances: 1/10 mL…

  • Standard cotton-plug type, but plug is not supplied. N-51A glass. Designed from ASTM E1044, Style II requirements. Pipets are calibrated to tip; with volume adjusted for blowing out the last drop. Designated by a ground band near the top. Sizes 5 mL and larger are constricted to retain plug, but…

  • Sterile, cotton-plugged, individually wrapped Individually wrapped in resealable plastic bags Borosilicate glass Tolerances: 1/2 mL pipet,± 0.013 mL ; 1 mL pipet, ±0.02 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.3 7536T48 pipets have black markings: remaining sizes have blue markings.

  • Sterile, cotton-plugged, bagged N-51A borosilicate glass; color-coded, graduated scale Designed from ASTM Standard E-714 Tolerances: 1 mL pipet, ±0.02 mL ; 2 mL pipet, ± 0.4 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.30 mL Calibrated to tip, for blow-out, 7536S55 pipet is ungraduated below…

  • Available in borosilicate or soda-lime glass PYREX® Pasteur Pipets are made from heat-resistant borosilicate Code 7800 glass Corning Pasteur Pipets are mode from economical soda-lime glass One-time use eliminates the danger of cross-contamination of valuable specimens or…

  • Disposable, sterile, PYREX® canister pack Calibrated "to deliver" Packaged in a flip-top canister to keep the pipets racked Sealed in polyethylene bags for sterility

  • Disposable, sterile, PYREX® individually wrapped Calibrated "to deliver" Has negative graduations and fire-polished tips for burr-free, even flow rates Individually wrapped in Steri-View™ wrapping (one side paper, one side plastic) for easier identification and opening

  • Disposable Bacteriological Pipets

    DWK Life Sciences (Kimble)

    Sterile Disposable Plugged Calibrated “to deliver” Wide tip glass pipets are sterile, disposable, plugged and suitable for transferring viscous or suspended liquids. Pipets are multi-packed in plastic bags (200 pieces each) to protect against contamination.

  • These precision PYREX® volumetric pipets are manufactured and calibrated "To Contain" (TC - bottom line) and "To Deliver" (TD - top line) to specifications for Class A volumetric ware. Pipets are color-coded with colored graduations and calibration lines enameled onto the glass.

  • These reusable PYREX® glass pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. They are calibrated "to deliver" (TD) their total capacity without blow-out. Reference: ASTM E-1293.

  • Sterile, disposable, cotton-plugged, individually wrapped, shorty, PYREX® glass Same pipets as 7536N10 series, but individually wrapped in Corning Steri-View™ pouch Color-coded

  • Color-Coded, SAFE-GARD Tempered Tip Calibrated to deliver Ideal for bacteriology or microbiology KIMAX-51 glass highly resistant to scratching and chemical attack. Scale is permanent brown stain fused into the surface without etching. All pipets are graduated to the tip and have…

  • Disposable, Shorty, PYREX Glass Similar to 7536D49 series, but neither sterilized nor cotton-  plugged Markings removed by dichromate cleaning solution

  • These reusable PYREX® pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-1293. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Calibrated "to deliver" (TD) their total…

  • These PYREX® VISTA™ volumetric pipets are manufactured to Class A capacity tolerances as indicated by ASTM E-969.

  • Pyrex® sterile multi-pack Designed for the larger volume user, these pipets are calibrated "to deliver" and are packed to permit easy access to several pipets at a time without contaminating the entire case Multi-packed plastic bags to ensure sterility Cotton-plugged …

  • Milk Testing Pipets

    DWK Life Sciences (Kimble)

    Kimble Kimax-51, APHA, Glass For milk and milk dilutions Blunt tip Calibrated to the tip, with volume adjusted for blowing out the last drop of undiluted milk or touching off the last drop of milk dilutions Fused-on markings provide sharp contrasts Size 1.1 mL is color-coded Tips are…

  • These PYREX® volumetric pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-969. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Color-coded markings enameled onto the glass. …

  • Color-coded Calibrated “to deliver” Graduated PYREX pipets are designed for cotton plugging. The uniform top-end openings permit performing of plugs and allow precise control of liquid column. Color-coded by size for easy identification and sorting. Colored graduations in…

  • Calibrated "to deliver" Large tip opening to allow more rapid intake and delivery of suspensions and viscous materials Color-coded by size for easy identification and sorting Accu-Red graduations are permanently fused into the glass Two rings at the top indicate the pipet…

  • Specially designed for use in low tissue culture hoods or other confined enclosures The 1, 5 and 10 mL sizes of these pipets are almost 3” shorter than comparable disposable serological pipets The 25 mL size is 5” shorter than most comparable reusable pipets All sizes have…

  • These PYREX® glass volumetric pipets were designed primarily for schools and laboratories where the Class A tolerance of No. 7100 is not required. They are constructed to the same wall thickness and length as our No. 7100, but have larger tip openings for faster delivery. It is primarily…

  • These PYREX® volumetric pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-969. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. These precision PYREX® volumetric pipets are…

  • Serological Pipets

    DWK Life Sciences (Kimble)

    Disposable, Glass, To Deliver, Plugged, Sterile, Non-Pyrogenic, Canister Pack, Color-Coded Pipets ave a uniform pulled tip and are clean, plugged, sterile and ready for use. Calibrated to deliver to the tip, with two rings near the top denoting that the small amount remaining in the tip after…

  • Pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. These “to deliver” pipets must be blown out to obtain total rated capacity. Reference: ASTM E-1044.

  • Soda-Lime Glass Pasteur Pipets

    DWK Life Sciences (Kimble)

    Econo-Pak Economy priced Plain or cotton-plugged Ungraduated with long capillary tips approximately 1 mm id Body of pipet is approximately 7 to 7.5 mm outside diameter with small constriction approximately 30 mm from the upper end to retain a cotton plug. Tip length of all 5…

  • Glass ungraduated Approximately 4 mL capacity Pasteur-type pipets for one time use in the transfer of small volumes. These pipets do not feature a constriction. Useful in automatic clinical analyzer techniques. Packaged in dispenser boxes containing 100 pipets and one 4 mL rubber bulb.

  • Pipet Serological Glass Single Wht 2ml

    DWK Life Sciences (Kimble)

    Non-pyrogenic Pipets have a uniform pulled tip and are clean, plugged, sterile and ready for use Calibrated To Deliver (TD) to the tip Provided with “negative” graduations to increase the versatility of the pipet 72105 series is packaged in color-coded paper/plastic…

  • Calibrated "to deliver" N-51A borosilicate glass Not sterilized or cotton-plugged Size 10 mL has constriction near top, forming chamber in which protective cotton plug can be inserted 7536U86 contain five shelf packs of 100 each.

  • Manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements.

  • Borosilicate Glass Pasteur Pipets

    DWK Life Sciences (Kimble)

    High-quality borosilicate glass, plain or cotton-plugged Designed from ASTM E732 specifications Ungraduated with square-cut ends Tip length of all 5 3/4" pipets is approximately 50 mm. Tip length of all 9" pipets is approximately 120 mm. Constriction approximately 25 mm from…

  • Pipet, KIMAX-51, Color-Coded, Serialized Similar to 7464D13 series, but is Class A serialized Pipet has a Safe-Gard tempered tip and meets ASTM specification E 694

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.