Beaded rim and short, large bore stem Funnel i.d. and stem o.d. listed respectively

For use without filter paper Offered in nine sizes and three porosities Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material…

Supplied with a round glass stopper and a PTFE stopcock plug Lower stems have an i.d. that allows for more complete seperation and eliminates the necessity of emptying the funnel

Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock…

Inside flutings for rapid filtration For use in flasks or test tubes without filter rack

With Teflon ® stopcock plug Standard Taper ground neck has solid plug stopper of high-density polyethylene Designed for Federal Specification NNN-F-800

Glass stopcock and glass stopper Stem length of 65 mm

With Standard Taper glass stopcock and Standard Taper glass stopper 60 mm long stem, which drains completely after stopcock is closed

PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…

These 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…

These fritted disc funnels are very useful in preparative work, or in making separations where it is necessary to wash the precipitate and redissolve with chemicals, which would attack filter paper. The angle of the funnel body facilitates the removal of precipitates. These funnels are available…

Molded construction with bottom ground flat; for use in the sugar industries

PTFE stopcock Graduated with double white ceramic enamel scale; right side ascends and left side descends Calibrated to contain With replacement stopper Designed from ASTM Specification E1096, Type 1C requirements Manufactured from 33 expansion, low extractable borosilicate glass…

These 6L PYREX® pear-shaped separatory funnels have glass No. 10 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

Cylindrical funnel has a PTFE stopcock and a glass hex head stopper 633031 is supplied without a stopper Standard Taper bottom joint is 24/40 with a drip tip Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Utilizes PVC-coated borosilicate glass, which helps contain glass and contents should breakage occur Chemically and thermally resistant Excellent optical clarity Mechanically durable Autoclavable or microwaveable at 121°C (250°F)

Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body

These 30mL PYREX® pear-shaped separatory funnels have glass No. 2 Standard Taper stopcocks and strong, hollow No. 9 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination

KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and PTFE stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation…

These 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 19/22 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For replacement…

KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and polytetrafluoroethylene stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete…

These 125mL PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow No. 22 Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.

This Buchner KIMAX® funnel is used wherever filter paper and membranes cannot withstand the chemical attack of the filtrate. Funnels are constructed with heavy-walled stems, and top rims are beaded for extra strength With a marking spot With KIMFLOW® fritted disc …

Long and short stem funnels are ideal for filtering Molded to an accurate 60° angle for ease in fitting filter paper Beaded rim for mechanical strength Long stem, which is constructed of heavy wall tubing Molded to an exact 58° angle , which increases filtering speed High resistance to…

These 500mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and a strong, lightweight No. 27 Standard Taper glass stopper. The PTFE plug fits into the micro-finish barrel …

KIMAX funnel constructed with heavy uniform walls and strong, molded rims and fire polished stems to give a long service life Funnels have a high resistance to chemical attack and mechanical and thermal shock 58 º funnel angle is a Kimble exclusive, formed to an exact angle for rapid…

Clear polysulfone funnel with imprinted graduations. Magnetic coupling of funnel to stem for fast filter changes. Used with 47 mm membrane filters for coliform testing and prefiltration of many fluids. Fits standard manifold systems with #8 rubber stopper connections. Capacity 300 mL (10 oz).…

Designed to handle liquids for analysis of particulate or microbiological contamination; funnels are graduated for accuracy Choose the Ultra-Ware microfiltration assembly that best fits your application Fritted Glass Support, 25 mm (4588A01) Used for general filtration.…