The IDP-STAT® ESD Badge Holders are an excellent way to shield employee badges, guest passes, or key cards. Made from permanently dissipative IDP-STAT® PVC film, these badge holders will never fail in the field and become a potential ESD threat. The ESD protection makes them safe for use in…

The EX655 is a 600A True RMS AC/DC Clamp meter. This clamp meter also measures AC/DC voltage, resistance, capacitance, frequency, temperature, continuity/diode test and has an NCV detector. The EX655 has a 1.18" jaw size which accommodates conductors up to 350 MCM. This meter also features a…

Pair the PGT120.COM tester unit with the PGT120.COM Data Terminal3 and you receive real-time ESD testing with personnel identification, access control and central data maintenance. The DT3 has a built in RFID reader, LCD display and relay. Also allows the connection to a number of accessories such…

The DT500 is a Laser Distance Meter with Bluetooth. This meter will measure the distance from the meter to a point 229ft (70m) away. The DT500 transmits distance readings to Apple iOS mobile devices and can measure Area and Volume as well as perform sum, difference and Pythagorean theorem…

Variable control from zero output to 95% line voltage. A voltage limit rear mounted center-off switch is used to select a 40v or 120v maximum output with the control knob on. 0-10 ammeter 5% accuracy F.S. NOT recommended for heaters rated less than 120 volts. Warning glow light mounted next to…

Precision Current & Voltage & Thermocouple Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 24V DC power source for 2-wire current loop 0 to 20V DC calibration source Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N) CJC - Cold Junction…

The MA3010 is a 3000A True RMS AC Flex Clamp Meter. The MA3010 features a 10 inch flexible clamp with LCD monitor. The True RMS measurements are for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with two AAA batteries. UL listed and CAT IV 600V safety rating. …

Measure the Light Intensity for Color LED Lights Measure White, Red, Yellow, Green, Blue, and Purple LED and Standard Lighting in Lux or Foot-Candle (Fc) units Manually store/recall up to 99 readings 4000 count LCD display Cosine and color corrected measurements Min/Max Average…

Measure the RF strength of Wi-Fi and LAN, cell phone, radio and TV transmission towers, wireless cameras and microphones. Sper Scientific's 3-Axis RF Meter 840047 measures RF (Radio Frequency) electromagnetic field strength in the frequency range of 50 MHz to 3.5 GHz. The 3-Axis probe provides…

Extech’s SP505 measures solar power level from outdoor sunlight to determine the best location of solar panel and solar water heater installations. It is also used indoors by window manufacturers, automotive industry, and remodeling home owners to check the level of solar radiation…

Extech’s DCP36 Power Supply offers 80W constant power topology and Auto Ranging Voltage and Current outputs. This compact, lightweight unit provides easy portability, and is ideal for tight workbenches with limited space. It features two 4-Digit LED displays, 3-programmable presets,…

The ESD-Audit-Kit includes instruments and equipment needed to perform ESD audits according to IEC 61340-5-1 and for qualification / verification of ESD control elements

Quickly and accurately verify the calibration of the Ranger Series dual wire resistance constant monitors. The CM2015PV is a resistance box with fixed 5% precision resistors. Resistance decade boxes can quickly and accurately simulate resistance for testing the accuracy of ESD testers and meters.

The rugged, full-featured Extech MM750W Wireless Datalogging Multimeter has 14 functions and includes a non-contact AC Voltage detector and Type K Temperature measurements. The CAT IV safety rating provides protection in industrial environments. Using the wireless feature, Bluetooth Datalogging…

Monitor up to 3 environmental parameters with one tiny instrument: Wind Speed, Air Temperature, Relative Humidity (RH). Light weight, tiny size with simple, one-hand, operation. They are perfect for scientists, agricultural specialist, facilities managers, HVAC professionals, home inspectors, field…

The SDL900 is an AC/DC Magnetic Meter and Datalogger with automatic temperature compensation. The SDL900 utilizes Hall effect sensor. This meter features an adjustable data sampling rate from 1 to 3600 seconds. Complete with uniaxial magnetic probe sensor with protective cover, SD memory card, 6 AA…

Tests voltage up to 10kV and measures Insulation Resistance to 500GOhm High test voltages up to 10kV with Insulation Resistance to 500GOhm Polarization Index (PI) measurement Dielectric Absorption Ratio (DAR) measurement EnerSave™ limits test duration to 10 seconds to save…

Key Features Detects between 100 V AC to 69,000 V AC Can be used in 5 ways - around the neck, clipped to front jacket pocket or belt, in the hand, on an arm and on a hot stick Allows hands free operation for work tasks by using a safety break-away neck lanyard or clipped or strapped…

The 7220.45 hand probes are designed to be used with resistance meters to evaluate ESD flooring according to ANSI ESD20.20. The probe is held in the hand and ensures excellent contact with skin while performing Walking Tests and other resistance measurements. The contact surface is made from rugged…

Test and graph the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The WT5000 Walking Test Kit has been designed to perform a voltage measurement of floor materials and footwear in combination with a person according to ANSI/ESD STM 97.2.…

The CM2815 Series dual conductor workstation monitor provides complete ESD protection to two operators by monitoring both resistance and voltage independently using dual conductor wrist strap. It also monitors ESD mat ground and low resistance of tool chassis' ground simultaneously. Utilizing…

The EX363 is a Compact HVAC True RMS Multimeter with a Built in Non Contact Voltage Detector. Featuring highly accurate True RMS measurements, LoZ for the prevention of false readings caused by ghost voltages, .5% basic accuracy, a 1000V AC/DC volt range, resistance up to 40MΩ, continuity…

32 to 149°F (0 to 65.0°C) Thermistor probe with 0.1° resolution Compatible with 407227/407228 - Heavy Duty pH/mV/Temperature meter/kit Compatible with SDL100 - pH/ORP/Temperature Datalogger

Data Terminal Controller For The 7100.PGT120.COM

The ET38 is a Voltage and Continuity Tester. This product has a flat head screw driver tip which tests voltages between 12 and 300V AC. LED light indicates the presence of a live voltage. Includes pocket clip and two button batteries.

The PGT120.CU device is designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120 Series ESD Combo Testers. The PGT120.CU is designed to verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment.…

Quickly Identifies and Pinpoints Gas Leaks 16" (406mm) gooseneck for easy access into hard to reach locations High Sensitivity One hand operation with thumb controlled sensitivity adjustments to eliminate background gas levels Visible and audible alarm at 10% (LEL) Lower…

Extension set with T-handle Note: Can be used only with Model 870 probe

High qualitlity alligator clip for grounding items such as ESD wrist straps. Connect to a standard banana plug

The METRISO 3000 test kit measures a wide range of values: low resistance from 1KilaOhm to 1.2 TeraOhm. The kit comes with two 5lb disc probes and has an integrated temperature and humidity gauge. Measuring voltage can be set between 10 – 500V and also be varied if desired.

50 m extension cable for floor measurements for the Metrsio 3000

The PGT120.COM personnel grounding tester takes quick and accurate resistance measurements of the ESD grounding products with the ability to integrate with a computer to store test data. Access to this information is valuable to your quality program. The unit operates with 3 independent measuring…