Precision Current & Voltage & Thermocouple Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 24V DC power source for 2-wire current loop 0 to 20V DC calibration source Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N) CJC - Cold Junction…

Dual-channel Oscilloscope with 3.8" (97mm) color LCD display Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms Peak Detect function for 50ns glitch capture XY Mode and FFT function to view component frequencies …

Quickly Identifies and Pinpoints Gas Leaks 16" (406mm) gooseneck for easy access into hard to reach locations High Sensitivity One hand operation with thumb controlled sensitivity adjustments to eliminate background gas levels Visible and audible alarm at 10% (LEL) Lower…

Tests up to 1000VAC with visual/audible indication 75 to 1000VAC input voltage with 45 to 65Hz frequency range LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live Beeper sounds intermittently when correct phase is detected and continuously…

The PQ3450-2 is a 200 Amp Data logging Power Analyzer (up to 30,000 sets of measurements). Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu. Full system analysis with up to 35 parameters. Includes 200 Amp Current Clamps; Optional 1200 Amp Current Clamps or 3000…

The EC210 is a Compact handheld Conductivity Meter with long life carbon rod combination electrode measures Conductivity, TDS and Temperature. Units of measure include μS/cm, mS/ cm, ppm, °F, and °C. The meter features three ranges for Conductivity and TDS plus adjustable Temperature…

The Extech EX470A True RMS Multimeter and Infrared Thermometer with Capacitance, Frequency, and Duty Cycle Measurements and 2 K-Type Remote Probes is the perfect meter for HVAC or plant maintenance. The IR thermometer measures the surface temperature from -4 to 518 °F (-20 to 270 °C)…

Precision meter provides resolution down to 1µOhm 6 ranges with 3 sub-ranges in each current range Measurement of resistive and inductive materials 5-Digit backlit LCD, PC interface Auto or Manual ranging, 10A maximum test current Store/Recall up to 3000 measurements …

Fast response with high accuracy, the Extech IR270 is ideal for quick checks of multiple spots in a process or for catching spikes in temperature. Easy programmable High/Low Alarm with tri-color display and audible alarm measures non-contact temperature up to 1202°F (650°C).

The HDV540 is a light weight Videoscope which includes a wired handset and 6mm diameter camera with 240° articulating tip for best viewing angle. Easy one-hand operation of the articulating camera tip facilitates viewing in obstructed areas where standard camera tips cannot access. Images and…

Measure the Light Intensity for Color LED Lights Measure White, Red, Yellow, Green, Blue, and Purple LED and Standard Lighting in Lux or Foot-Candle (Fc) units Manually store/recall up to 99 readings 4000 count LCD display Cosine and color corrected measurements Min/Max Average…

Measure earth ground in 4 ranges from 2 to 2000 Ohm 4-wire, 3-wire, and 2-wire testing Large dual line LCD Automatic I (current) and P (potential) spike check Test Hold function for easy operation Autoranging, Automatic Zero adjustment, Data Hold and Auto Power off AC Earth…

The TKG-B is a carrying case for Extech's TKG series thickness gauges. The TKG-B is a durable case that will protect your meter. The built in belt clip secures the case to you when meter is not in use. The TKG-C is a bottle of water soluble coolant solution for use with the TKG series of…

Precision Current & Voltage Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 0 to 20V DC calibration source Up to five user adjustable calibration presets Palm-sized double molded housing and large dot-matrix digital backlit LCD Standard banana I/O ports Large…

The TP873-5M is an extra-long bead wire type K temperature probe. The TP873-5M is a 5 meter long temperature probe with a mini connector and banana plug adaptor. Comes with a six month warranty.

The rugged, full-featured Extech MM750W Wireless Datalogging Multimeter has 14 functions and includes a non-contact AC Voltage detector and Type K Temperature measurements. The CAT IV safety rating provides protection in industrial environments. Using the wireless feature, Bluetooth Datalogging…

The EX363 is a Compact HVAC True RMS Multimeter with a Built in Non Contact Voltage Detector. Featuring highly accurate True RMS measurements, LoZ for the prevention of false readings caused by ghost voltages, .5% basic accuracy, a 1000V AC/DC volt range, resistance up to 40MΩ, continuity…

The DT500 is a Laser Distance Meter with Bluetooth. This meter will measure the distance from the meter to a point 229ft (70m) away. The DT500 transmits distance readings to Apple iOS mobile devices and can measure Area and Volume as well as perform sum, difference and Pythagorean theorem…

Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R,P,ESR) Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance) Simultaneous 20,000/2,000 count…

The VB450 is a convenient compact sized Vibration Meter which measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases.  VB450 features a wide 10Hz to 1500Hz frequency range and provides…

The Extech TL708 Alligator Clip Set has toothed jaws for the solid gripping of fine wires. They are heavy duty alligator clips with a 1000V, 6A CAT IV-600V and CAT III-1000V safety rating. Each have a one inch jaw length and a 1.6 inch jaw opening. The overall length of these alligator clips is 4.2 inches.

The MA445 is an 11 Function, 400A True RMS AC/DC Clamp Meter and NCV. Compact Clamp Meter with Type K temperature measurements. True RMS feature for accurate readings regardless of waveforms. 1.2" (30mm) jaw size fits conductors up to 500MCM. CAT III 600V safety rating. CE and ETL certified.…

4-wire Pt-100Ohm RTD probe with 4-pin DIN plug latinum RTD temperature sensor (100Ohm) Wide temperatures range: -40 to 932°F (-40 to 500°C)

Transform select Extech meters to a datalogger! The 407001-PRO software allows you to live stream data from compatible meters to a desktop or laptop PC. Collected data can then be used to generate reports, graph data points, and to share with others on your team. Data can be viewed as a list or on…

Fast response detection of gas leakage Detects combustible gases - Liquefied Natural Gas (LNG) and Liquefied Propane Gas (LPG) from 500 to 6500ppm Highly sensitive detection circuitry Audible and visual alarm Continuous operation up to 4 hours LED indicators for gas leakage and…

Compact and powerful, the Extech EX410A Eight-Function True RMS Professional Multimeter provides the versatility of multiple meters in one convenient device. The EX410A measures AC/DC voltage and current, resistance, diode, and temperance. A large, backlit display and 1-inch high digits allow for…

Extech’s SP505 measures solar power level from outdoor sunlight to determine the best location of solar panel and solar water heater installations. It is also used indoors by window manufacturers, automotive industry, and remodeling home owners to check the level of solar radiation…

Extech’s SD900 allows technicians to easily monitor and record DC mA values from 3 external sensors, transducers, and other sources using one meter. It also stores the time and date of when readings are taken. The logger features a large triple LCD display and records data on an SD card in an…

The MA3010 is a 3000A True RMS AC Flex Clamp Meter. The MA3010 features a 10 inch flexible clamp with LCD monitor. The True RMS measurements are for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with two AAA batteries. UL listed and CAT IV 600V safety rating. …

The SDL900 is an AC/DC Magnetic Meter and Datalogger with automatic temperature compensation. The SDL900 utilizes Hall effect sensor. This meter features an adjustable data sampling rate from 1 to 3600 seconds. Complete with uniaxial magnetic probe sensor with protective cover, SD memory card, 6 AA…

The MA610 is a fully loaded clamp meter with multimeter functions including AC Current, AC/DC Voltage, Resistance, Frequency, and Capacitance. It also has a built-in non-contact voltage (NCV) detector to quickly check circuits and wires for live voltages. Complete with test leads, three AAA…