The TP873-5M is an extra-long bead wire type K temperature probe. The TP873-5M is a 5 meter long temperature probe with a mini connector and banana plug adaptor. Comes with a six month warranty.

The FLIR VS80 is a versatile, professional videoscope that you can  rely on when inspecting locations that are difficult or unsafe to access. Seven unique compatible probes* with waterproof (IP67) camera tips are available to give you flexibility for virtually any type of inspection. Options…

Extech’s DCP36 Power Supply offers 80W constant power topology and Auto Ranging Voltage and Current outputs. This compact, lightweight unit provides easy portability, and is ideal for tight workbenches with limited space. It features two 4-Digit LED displays, 3-programmable presets,…

The Warmbier CPM74 Charge Plate Monitor is an simple-to-use device to measure air ionizers performance. Quickly and easily test ionizer decay times and offset voltage (balance) according to ANSI ESD2020 and IEC 61340-2-1. The CPM74 is battery powered and due to its compact design, it is very…

Enables precise measurement of solar radiation power for the manufacture and installation of solar panels and environmental applications. Results appear in W/m2 or BTU/ft2 on a triple tier backlit display which shows a continually updated minimum, maximum or average reading. The display also shows…

Simply approach the source at any angle and the triple-axis meter automatically determines EMF (electro magnetic frequencies), eliminating the need for additional calculations. X, Y, and Z axis results can also be viewed independently. Measures electro magnetic fields of extremely low frequency…

The MG320 combines a portable 20GΩ/1000V Insulation Tester with a True RMS Multimeter. Insulation tester includes PI/DAR modes, programmable timer, and a comparator for custom test configurations and quick results. Cat IV 600V Safety rating. Manually store/recall up to 99 readings. 5 Test…

Our compact, pocket-sized moisture meter measures moisture content in wood and other building materials such as: sheetrock, drywall, wallboard, concrete, mortar, plaster, etc. This handy, compact moisture meter has a dual backlit LCD digital display for moisture & temperature. Displays temperature…

Tests up to 1000VAC with visual/audible indication 75 to 1000VAC input voltage with 45 to 65Hz frequency range LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live Beeper sounds intermittently when correct phase is detected and continuously…

The METRISO® B530 ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020 and IEC 61340-5-1 and for qualification / verification of ESD control elements. The kit is built around the METRISO® B530 digital high resistance meter. …

Extech’s pocket-sized autoranging Light Meter offers wide light intensity ranges measuring up to 40,000Fc (400,000Lux) with high resolution to 0.01Fc (0.1Lux). Ideal for indoor lighting tests and for checking security and safety illumination in parking garages, night time ATM areas,…

Monitor visible light levels anywhere with fast, stable and accurate response. Results are easily read on the extra large LCD (1½" high, 38.1 mm) with bar graph, low battery and over range indications. The color and cosine corrected sensor meets C.I.E. photopic spectrum. Will read LED light. Also…

The Extech UV510 UV light meter measures UVA light radiation from natural and artificial light sources. It offers a backlit dual display, cosine corrected sensor, two selectable ranges, zero function, min/max recording, display hold, and auto power off. Compact size with handy wrist strap gives you…

Measure the RF strength of Wi-Fi and LAN, cell phone, radio and TV transmission towers, wireless cameras and microphones. Sper Scientific's 3-Axis RF Meter 840047 measures RF (Radio Frequency) electromagnetic field strength in the frequency range of 50 MHz to 3.5 GHz. The 3-Axis probe provides…

The HDV540 is a light weight Videoscope which includes a wired handset and 6mm diameter camera with 240° articulating tip for best viewing angle. Easy one-hand operation of the articulating camera tip facilitates viewing in obstructed areas where standard camera tips cannot access. Images and…

The IDP-STAT® ESD Badge Holders are an excellent way to shield employee badges, guest passes, or key cards. Made from permanently dissipative IDP-STAT® PVC film, these badge holders will never fail in the field and become a potential ESD threat. The ESD protection makes them safe for use in…

The Spartan Series Continuous Monitors provide ongoing verification of the wrist strap system and the work surface ground. The Spartan system eliminates the need for routine wrist strap testing and documentation and alarms when failures occur, greatly reducing the risk of ESD damage between tests.…

High speed, consistent static elimination for an extended 3’x6′ coverage area – Includes a heater! The BFN 8412 extended range ionizing blower, with AC technology, provides excellent balance and stability for secure workstation protection. Designed to cover a broad 3? x 6?…

The Extech EX430A True RMS Autoranging Multimeter (with K Type, Capacitance, Frequency, and Duty Cycle) is a professional grade True RMS multimeter capable of performing a wide range of measurements. Functions include AC and DC voltage to 600V, AC and DC current to 10A, resistance to 40MOhm,…

The CAL1000 device is used to facilitate easy, in-house, calibration verification of most ESD testers and surface resistance meters. The CAL1000 is designed to verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment. With the…

Compatible with SDL700 Pressure Meter/Datalogger Compact size, NPT thread Corrosion-resistant brass alloy Linearized voltage output (0 to 100mV DC)

The PhytoMAX-4 Commercial grade LED grow lights for research and production combine a truly complete broad spectrum including UV and industry-leading power density to provide the appropriate amount of high-quality light to any project from a single growth chamber to large-scale industrial…

The PGT120.COM personnel grounding tester takes quick and accurate resistance measurements of the ESD grounding products with the ability to integrate with a computer to store test data. Access to this information is valuable to your quality program. The unit operates with 3 independent measuring…

BR-17CAM-2M 17mm Borescope Camera head with Cable for Extech Borescope Models BR100, BR200 and BR250. 78.7 in. (2m)cable length with 2.36 in. minimum bend radius. 50 Degree viewing angle. 5.9 to 9.8 in. focus distance. Waterproof (IP67) with 2 bright LEDs with dimmer. BR-17CAM-5M 17mm…

The EFM51 is a full-featured hand-held field meter used to perform static surveys and evaluate charge accumulation in electronic manufacturing and in industrial operations. The EFM51 measures static voltages within ±20kV (20,000V) with a microcontroller that calculates the field strength (V/m) with…

SRM200 is a very useful instrument for checking surface resistance and resistance to ground. The instrument can be used on different work surfaces, floors, chairs, carts, clothing and packaging materials, etc. The measured value is displayed with LED display that indicates whether the value is…

Monitor up to 8 environmental parameters with one tiny instrument. Light weight, tiny size with simple, one-hand, operation. They are perfect for scientists, agricultural specialist, facilities managers, HVAC professionals, home inspectors, field technicians, health and safety personal, hazmat…

4-wire Pt-100Ohm RTD probe with 4-pin DIN plug latinum RTD temperature sensor (100Ohm) Wide temperatures range: -40 to 932°F (-40 to 500°C)

Precision Current & Voltage & Thermocouple Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 24V DC power source for 2-wire current loop 0 to 20V DC calibration source Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N) CJC - Cold Junction…

The METRISO 3000 test kit measures a wide range of values: low resistance from 1KilaOhm to 1.2 TeraOhm. The kit comes with two 5lb disc probes and has an integrated temperature and humidity gauge. Measuring voltage can be set between 10 – 500V and also be varied if desired.

This clamp meter offers all the features you need to fit the way you work. The small bodies and jaws fit perfectly in your hand and into tight places. Meter controls are positioned so that current measurements can be done with one hand. A large backlit display is easy to see, and the handy display…