ICP-MS Supplies, Agilent Technologies
-
Basic Consumables Kit
Agilent TechnologiesThe Agilent Technologies basic consumables kit consists of 12 easy-fit peristaltic pump tubes for sample (2-stop, white/white, 5005-0020), 12 waste (3-stop, yellow/blue, 5005-0022), 12 internal standard (2-stop, blue/orange, 5005-0021). It also includes PFA sample tubing measuring 0.5 mm I.D x 1.6…
-
Guard Column
Agilent TechnologiesThe Agilent Technologies guard column is suitable for use with G3154-65001 or G3288-80000 speciation columns for arsenic. Application: For Arsenic Speciation. Use with G3154-65001 or G3288-80000 speciation columns for arsenic This product is only available to U.S. Domestic Customers. For…
-
Integrated Sample Introduction System 3 Flangeless Fitting
Agilent TechnologiesThe ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…
-
MassHunter Workstation User Guide
Agilent TechnologiesMassHunter Workstation user guide for Agilent 7700 Series ICP-MS. Application: For Agilent 7700 Series ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Skimmer base assy, 8900 with x-lens, SUS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Plasma/Aux gas tubing with inner sleeve
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing for Drainage (4.0mm id, 2.5m)
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing for reaction cell gas, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Integrated Autosampler (I-AS) Manl (JP)
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Z-Axis drive assy ASX520, PEEK anti-kink
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Speciation Column
Agilent TechnologiesHPLC separation, followed by ICP-MS detection is well established as the analytical method of choice for speciation analysis of many sample types. As a leader in GC and HPLC systems, columns, and ICP-MS instrumentation, Agilent is at the forefront of hyphenated ICP-MS research and development. For…
-
Ferrule for 0.25 mm id pump tubing
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
M5141A option - Add Pt sampling cone (18mm insert), 7800
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Oxygen Gas Regulator
Agilent TechnologiesThe Agilent Technologies two-stage oxygen gas regulator with PTFE seals and stainless-steel diaphragms has a brass body which provide excellent strength and durability. It has CGA580 inlet with maximum pressure of 3000 psig and outlet pressure of 15 psig with 30 psig gauge and 1/8 Inch Swagelok…
-
G3690A option - Add Ni skimmer cone for x-lens, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Power Amplifier Tube
Agilent TechnologiesThe Agilent Technologies ceramic power amplifier tube is suitable for NexION/ELAN 9000/6x00/DRCs, ELAN 5000 and PerkinElmer ICP-MS instruments. Application: For NexION/ELAN 9000/6x00/DRCs & ELAN 5000, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For…
-
Vacuum Fluid Odor Element
Agilent TechnologiesThe Agilent Technologies replacement vacuum fluid odor element is suitable for oil mist filter used with Edwards E2M18 vacuum pump. Application: For Oil Mist Filter for Edwards E2M18 Vacuum Pump, Replace Odor Element Every 12Mths Along with Oil Mist Filter & Rotary Pump Oil, or When Oil Begins to…
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Sampling Cone,Nickel Plated
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Peristaltic Pump Tubing
Agilent TechnologiesObsolete. Replaced by 5005-0023. Replaced by Easy-fit tubing with 2-stopper optimum length to avoid trimming and expedite sample and ISTD uptake. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Offset Skimmer Base Assembly
Agilent TechnologiesAgilent ICP-MS skimmer cone bases are available in either stainless steel or brass. The operating temperature of the skimmer cone tip is controlled by the skimmer base material. The stainless steel base is used for nickel (Ni) skimmer cones. The platinum skimmer cone should only be used with the…
-
O-rings for vent valve, Viton 2/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
MicroFlow Nebulizer
Agilent TechnologiesThe Agilent Technologies MicroFlow nebulizer with inert PFA and Agilent integrated SPS4 probe self-aspirates at 200 µL/min. It is suitable for use with Agilent SPS 4 auto sampler, for trace analysis and hydrofluoric acid (HF) analysis. Application: For use with Agilent Sps 4 Autosampler, For Trace…
-
Hyper Skimmer Cone Screw
Agilent TechnologiesAgilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…
-
Torch for GC-ICP-MS Interface
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
G1131A option - Mandatory option for a 79 with x-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Omega lens for x-lens, ICP-MS, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Ferrule & O-Ring Kit
Agilent TechnologiesThe Agilent Technologies ferrule and O-ring kit containing 2 FPM O-rings and 2 ferrules, provides replacement sealing parts for PP connector G1820-65052. It is suitable for use with nebulizer gas line connector for babington & quartz concentric nebulizer. Application: For Nebulizer Gas Line…
-
Tubing kit, argon humidifier 7900 ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Vacuum Fluid Oil Mist Filter Kit
Agilent TechnologiesOil mist filter kit for DS402 rotary vane pump. Includes oil mist filter element, connecting tubing, securing clamp. Application: For DS402 Rotary Vane Pump, ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.