ICP-MS, Protein Purification Chromatography Media
-
Spray Chamber
Agilent TechnologiesAgilent glass cyclonic, inert PFA spray chambers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision, efficient drainage, and reduced interferences and you can use them with complete confidence. Use the single pass glass cyclonic spray chamber for…
-
Spray Chamber for UHMI, 7900 ICP-MS 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow…
-
Includes all O-Rings used in the Cross-Flow and Cross-Flow II nebulizers.
-
The SeaSpray ™ concentric nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization ef ciency for trace level analyses. It offers freedom from clogging while nebulizing solutions to the limit of solubility of most mineral salts and conferring significant…
-
Low-Flow GemCone for Optima 3X00 Nebulizer
PerkinElmerCan be used with either the glass Cyclonic spray chamber or the Ryton ® MEINHARD ® end cap. RequiresMEINHARD ® End Cap II, P/N N0680504, when used with the Ryton ® double-pass, Scott-type spray chamber(glass or Ryton).
-
Drain Tank (with PVC connector,1 liter)
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Spray Chamber IsoMist Kit
Agilent TechnologiesThe Agilent Technologies spray chamber IsoMist kit includes all parts made of high-quality materials. Kit is suitable for PerkinElmer NexION instruments. Application: For PerkinElmer NexION This product is only available to U.S. Domestic Customers. For research use only, not to be used in…
-
EzyLok Kit for Glass Concentric Nebulizers
PerkinElmerIncludes: EzyLok Connector for 4mm Tubing EzyLok 6mm Hose Adaptor Nebulizer Hose Clip
-
F2 Standard Integrated Capillary
PerkinElmerF2 Standard Integrated Capillary (standard fitting with + nebulizers). F2 Standard integrated capillary for self-aspiration or pumping. Includes 0. 5 mm i.d. (orange marker) 70 cm long capillary.
-
Torch quartz 2.5mm ID for 7500 ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Torch Injector
Agilent TechnologiesAgilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…
-
Eluo Nebulizer Cleaner
PerkinElmerEluo Nebulizer Cleaner Particle build-up in a nebulizer capillary and tip causes sample flow to be constricted, thereby reducing nebulizer efficiency andperformance. Previously there was no simple way to effectively clean and unblock nebulizers. Now, blocked nebulizers can be safelyand easily…
-
Spray Chamber Connector
Agilent TechnologiesThe Agilent Technologies spray chamber connector is made from EzyLok technology that helps in preventing any kind of penetration and is used with jacketed spray chamber. Application: For Jacketed Spray Chamber. Suitable for PerkinElmer ICP-MS This product is only available to U.S. Domestic…
-
This baffled cyclonic spray chamber, made of borosilicate glass, is an integral part of the sample introduction system responsible for filtering the sample mist to permit appropriate droplet size distribution to reach the plasma. The spray chamber features a sand-blasted neck with EZ seal fitting…
-
Nebulizer Obstruction Removal Kit
Agilent TechnologiesThe Agilent Technologies nebulizer obstruction removal kit includes all parts made of high-quality materials. Kit is suitable for PFA nebulizers and PerkinElmer ICP-MS instruments. Application: For PFA Nebulizers, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. …
-
Injector Support Adapter
Agilent TechnologiesThe Agilent Technologies injector support adapter provides good resistance to corrosion and conforms well with Ryton Scott spray chamber and twist-type torch mounts. Application: For ELAN DRC-e/9000/6x00/5000. For Corrosion-Resistant Torch & Ryton Scott Spray Chamber & Twist-Type Torch,…
-
The Axial View Purge Extension Window is a replaceable quartz window that slides into the purge extension between the torch and the optics. The Radial View Purge Extension Window Tube is a replaceable quartz Tube that slides into the mount between the torch and the optics for the radial view.
-
The Axial View Purge Extension Window is a replaceable quartz window that slides into the purge extension between the torch and the optics. The Radial View Purge Extension Window Tube is a replaceable quartz Tube that slides into the mount between the torch and the optics for the radial view.
-
Sample Introduction Kit
Agilent TechnologiesThe Agilent Technologies HF-resistant chemically inert sample introduction kit includes two PFA MicroFlow nebulizers, PFA endcap with extra gas port, PFA spray chamber, PT injector and shield, quartz torch. This kit is suitable for use with PerkinElmer ICP-MS instruments. Application: For…
-
Long connector tube for ICP-MS inert kit
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Quartz connector tube straight, ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Torch, quartz 1.5mm inj taper for ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
7500 HMI Kit Supplies
Agilent TechnologiesICP-MS parts and supplies are designed, manufactured, and tested to the most rigorous specifications for your 7500 ICP-MS systems. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies…
-
The MicroMist ™ micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists with sample uptakes 0.2 – 0.6 mL/min are fitted with a UniFit connector with 1.3 mm O.D. x 0.50 mm I.D. x 700 mm long sample tubing (N0777513). MicroMists with sample uptakes 0.05…
-
This quartz hydride gas-liquid separator is used with all hydrideFAST autosampler systems.
-
Nebulizer Pressure Hose Clip
Agilent TechnologiesThe Agilent Technologies nebulizer pressure hose clip is suitable for ELAN 9000/6xX00/DRC, NexION and PerkinElmer ICP-MS instruments. Application: For Elan 9000/6Xx00/DRC & NexION, PerkinElmer ICP-MS Instruments This product is only available to U.S. Domestic Customers. For research use…
-
Viton Torch O-Ring Kit for NexION 2000/1000
PerkinElmerThis kit includes: 2.8 mm I.D. O-Rings, 4 Qty. 14 mm I.D. O-Ring, 1 Qty. 16 mm I.D. O-Ring, 1 Qty.
-
The internal standard mixing tee is perfect for online addition of internal standard or online dilution. Achieves excellent mixing with minimal dead volume.
-
UniFit sample connector, 0.25mm id, 10/p
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
This kit includes: O-Ring 29.74 mm I.D., Qty. 1 (09902131) O-Ring 20.3 mm I.D., Qty. 2 (09902223) O-Ring 28.17 mm I.D., Qty. 1 (09921061) O-Ring 26.57 mm I.D., Qty. 1 (09921062) O-Ring 20.3 mm I.D., Qty. 1 (09902045)
-
This kit includes: Glass Standard Cyclonic Spray Chamber (N0776052) Cyclonic Spray Chamber Mount Kit (N0770131) Cyclonic Spray Chamber Mount Nut (N0776005) Cyclonic Spray Chamber Mount Sleeve (N0776004) Cyclonic Spray Chamber Mount Ring (N0776003) 20 mm M4 Cap Screw (09919167) 6 mm M3 Cap…