ICP-MS, NEW! Life Science
-
Cyclonic Spray Chamber Mounting
Agilent TechnologiesThe Agilent Technologies cyclonic spray chamber mounting is suitable for ELAN 9000/6x00/DRC and PerkinElmer ICP-MS instruments. Application: For ELAN 9000/6x00/DRC, PerkinElmer ICP-MS Instruments This product is only available to U.S. Domestic Customers. For research use only, not to be…
-
ICP-OES Nebulizers
Agilent TechnologiesAgilent offers a wide range of concentric and microconcentric glass nebulizers to facilitate sample introduction for a variety of ICP-OES measurements. Nebulizer styles can accommodate samples with up to 20% total dissolved solids (TDS) and slurry samples containing more than 20% total dissolved…
-
Spray Chamber
Agilent TechnologiesAgilent glass cyclonic, inert PFA spray chambers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision, efficient drainage, and reduced interferences and you can use them with complete confidence. Use the single pass glass cyclonic spray chamber for…
-
Laminar flow spray chamber addition gas tee, with F5 fittings and 1/4 PFA gas line fitting, for NexION 300 and 350 ICP-MS series instruments.
-
Nebulizer Union
Agilent TechnologiesThe Agilent Technologies nebulizer union provides a secure connection to ultra-clean sampler probe and with PFA-ST nebulizers. The strong Chlorotrifluoroethylene CTFE construction of the union provides added durability and strength. Application: For PFA-ST Nebulizer, Connects to Ultraclean Sampler…
-
Concentric Quartz Nebulizer, MEINHARD Type A3
PerkinElmerThe MEINHARD concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control.
-
7500 HMI Kit Supplies
Agilent TechnologiesICP-MS parts and supplies are designed, manufactured, and tested to the most rigorous specifications for your 7500 ICP-MS systems. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies…
-
Low Dead Volume Connector
Agilent TechnologiesThe Agilent Technologies low dead volume connector has a unique PEEK material construction that endures tough impacts and works well with 1.6 mm OD tubing. Application: For Type A/C/K Concentric Nebulizers, Suitable for Elan 9000/6Xx00/DRC & NexION This product is only available to U.S. Domestic…
-
Injector Support Adapter O-Ring
Agilent TechnologiesThe Agilent Technologies external cassette-type large injector support adapter O-ring is suitable for use with ELAN 9000/6xX00/DRC, NexION, Torch and PerkinElmer instruments. Application: For ELAN 9000/6xX00/DRC & NexION, PerkinElmer, Torch This product is only available to U.S. Domestic…
-
Injector Support Adaptor
Agilent TechnologiesAgilent quartz, sapphire, and alumina torch injectors, and injector support adapters for PerkinElmer NexION 300/350 & ELAN 9000/6x00/DRCs ICP-MS instruments. Achieve guaranteed performance with supplies for PE from Agilent that are equivalent to the PerkinElmer ICP-MS versions so you can use…
-
MicroMist nebulizer (glass) U-series 1/p
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Concentric Nebulizer
Agilent TechnologiesAgilent nebulizers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision and reduced interferences, so you can use them with complete confidence. They come complete with the PE gas and liquid connectors for use right out of the box. Application: For…
-
Injector Assembly
Agilent TechnologiesThe Agilent Technologies 1.8 mm injector assembly with twisting capability is made from PFA-sapphire material that ensures a smooth flow of liquid. Application: For High Matrix Geochemistry & Hf Applications Where Low Ppt Al not Required, For ELAN DRC-e/9000/6x00/5000/500/NexION, PerkinElmer…
-
ICP-MS Injector Support Adapter
Agilent TechnologiesAgilent quartz, sapphire, and alumina torch injectors, and injector support adapters for PerkinElmer NexION 300/350 & ELAN 9000/6x00/DRCs ICP-MS instruments. Achieve guaranteed performance with supplies for PE from Agilent that are equivalent to the PerkinElmer ICP-MS versions so you can use…
-
UniFit sample connector, 0.5mm id, 10/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
SeaSpray Concentric Nebulizer
Agilent TechnologiesThe Agilent Technologies SeaSpray concentric nebulizer with an uptake rating of 400 is compatible with 1.3 mm sample tubing. The borosilicate glass construction provides good strength and helps in enduring rigorous use. Application: For PerkinElmer ICP-MS, for ELAN 9000/6xX00/DRC/NexION This…
-
O-ring kit for Concentric Neb. (10 ea)
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Concentric Glass Nebulizer, MEINHARD Type C
PerkinElmerThe MEINHARD® concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. For use with high dissolved solids solutions.
-
Nebulizer Clip
Agilent TechnologiesThe Agilent Technologies nebulizer clip is suitable for A/C/K concentric nebulizers, ELAN 9000/6xX00/DRC, NexION and PerkinElmer ICP-MS instruments. Application: For A/C/K Concentric Nebulizers, For ELAN 9000/6xX00/DRC & NexION, PerkinElmer ICP-MS Instruments This product is only available to…
-
Injector Support Adapter O-Ring
Agilent TechnologiesThe Agilent Technologies internal twist cassette-type injector support adapter O-ring is suitable for use with ELAN 9000/6xX00/DRC, NexION, Torch and PerkinElmer instruments. Application: For ELAN 9000/6xX00/DRC & NexION, PerkinElmer, Torch This product is only available to U.S. Domestic…
-
Injector Sapphire Tube
Agilent TechnologiesThe Agilent Technologies demountable 2 mm injector sapphire tube is ideal for HF-resistant sample introduction system. It is suitable for ELAN DRC-e/9000/6x00/5000/NexION and PerkinElmer ICP-MS instruments. Application: For Hf-Resistant Sample introduction System, . For ELAN…
-
Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…
-
Spray Chamber
Agilent TechnologiesAgilent glass cyclonic, inert PFA spray chambers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision, efficient drainage, and reduced interferences and you can use them with complete confidence. Use the single pass glass cyclonic spray chamber for…
-
Spray Chamber
Agilent TechnologiesAgilent glass cyclonic, inert PFA spray chambers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision, efficient drainage, and reduced interferences and you can use them with complete confidence. Use the single pass glass cyclonic spray chamber for…
-
Sample Introduction Kit
Agilent TechnologiesThe Agilent Technologies HF-resistant chemically inert sample introduction kit includes two PFA MicroFlow nebulizers, PFA endcap with extra gas port, PFA spray chamber, PT injector and shield, quartz torch. This kit is suitable for use with PerkinElmer ICP-MS instruments. Application: For…
-
PFA Concentric Nebulizer (50ul/min)
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
PFA-Sapphire Injector Assembly
Agilent TechnologiesAgilent quartz, sapphire, and alumina torch injectors, and injector support adapters for PerkinElmer NexION 300/350 & ELAN 9000/6x00/DRCs ICP-MS instruments. Achieve guaranteed performance with supplies for PE from Agilent that are equivalent to the PerkinElmer ICP-MS versions so you can use…
-
SeaSpray Nebulizer
Agilent TechnologiesThe Agilent Technologies seaspray nebulizer conforms well with aqueous as well as organic solvents and the EzyLok connection ensures a secure fit. Borosilicate glass construction provides added strength and impact resistance. This product is only available to U.S. Domestic Customers. For…
-
PFA Inert kit, Sapphire 1.5mm with Torch
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Sapphire injector, inert torch, 1.5mm id
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
The baffled cyclonic spray chamber, made of perfluoroalkoxy alkanes (PFA), is an all-purpose hydrofluoric acid-resistant spray chamber. It features o-ring-free connections to the nebulizer and torch injector, secure, leak-free threaded drain port, internal baffle, and threaded auxiliary port for…
-
Concentric Nebulizer
Agilent TechnologiesAgilent nebulizers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision and reduced interferences, so you can use them with complete confidence. They come complete with the PE gas and liquid connectors for use right out of the box. Application: For…