ICP-MS Nebulizers
These nebulizers convert liquid samples into aerosols, which are then transported into the plasma torch for analysis. The precision of ICP-MS Nebulizers, particularly those from the nebulizer ICP range, allows for detecting trace elements and isotopes at extremely low concentrations, making them invaluable in environmental monitoring and geochemistry. Their design ensures minimal sample loss and maximizes analytical sensitivity, offering reliable and consistent performance.
By providing a seamless interface between liquid samples and high-temperature plasma, these nebulizers support the advanced analytical capabilities of ICP-MS systems, contributing to the generation of accurate and reproducible results.
-
MicroFlow nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport effciency and high sensitivity. The PolyPro-ST MicroFlow nebulizer is a low-cost, HF-resistant alternative to the PFA nebulizer. The PolyPro nebulizer has a lower chemical…
-
PFA MicroFlow Nebulizer with Integrated Autosampler Probe (Carbon Fiber support). This nebulizer self-aspirates at low-flow rates with any autosampler and provides the same benefits of the PFA MicroFlow nebulizer. The integrated sampling probe is constructed by encapsulating a rigid support…
-
VeeSpray Ceramic Nebulizer 0.6 - 3.0 mL/min
PerkinElmerThe Ceramic VeeSpray nebulizer is made from alumina ceramic, making it ideal for HF analyses. It provides reproducible performance when working with samples containing large particulates. Material: 99. 8% Alumina Ceramic High physical reproducibility ~ 1% TDS tolerance, typically up to 30% …
-
The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization effciency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts, and conferring signifcant…
-
-
Poly-Pro Nebulizer (Elan Version) (Detachable Capillary)
-
No further information is available for this product.
-
TR Plus Glass Nebulizer 0.5 mL
PerkinElmerMeinhard TR Plus glass nebulizer, low internal volume, 0. 5 mL/min, 50 psi, with FG+ PFA gas fitting and sample uptake line.
-
-
PFA-100 Microflow Nebulizer 10 uL/min
PerkinElmerThese nebulizers self-aspirate at low-flow rates with any autosampler and provide the same benefit ts of the PFA MicroFlow nebulizer. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is…
-
.043 ODx.018 ID polyethylene tubing 10ft for Mira Mist Nebulizer
-
MEINHARD Plus Nebulizer fitting for the NexION 2000 and 1000 ICP-MS Concentric Nebulizer (N8152378).
-
Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow…
-
.043ODx.018 ID polyethylene tubing 100ft for Mira Mist Nebulizer
-
-
Complete high purity sample introduction system for NexION 300 and 350. All wetted surfaces are PTFE and platinum. Used by a majority of semiconductor labs worldwide for the analysis of semiconductor grade chemicals and Si wafer samples. This kit includes: 47 mm PFA Barrel Spray Chamber with…
-
This product is a PFA MicroFlow Nebulizer with Integrated Autosampler Probe and carbon fiber support. It self-aspirates at low-flow rates with any autosampler and provides the same benefits of the PFA MicroFlow nebulizer. The integrated sampling probe is constructed by encapsulating a rigid support…
-
-
-
CTFE union kit (10-32 to 1/4-28), for the NexION 2000 and 1000 ICP-MS PFA-LC nebulizer.
-
Replacement connector and sample tubing for U-Series concentric nebulizers. Supplied in a pack of 10.
-
Slurry U-Series Nebulizer 4 mL/min
PerkinElmerThe Slurry Nebulizer excels at the analysis of slurries. One common slurry application is the analysis of used engine oils for wear metals. Any sample which consists of small particulates in a liquid matrix is a slurry and is suited to this nebulizer. Samples that contain high dissolved solids are…
-
Four Male Peripump Union barb fittings are included in the NexION 2000 ICP-MS Base Configuration's Consumable Kit (N8150054), Core Configuration's Consumable Kit (N8150055), Productivity Configuration's Consumable Kit (N8150056), and Semi Configuration's Consumable Kit (N8150057).
-
Gas line for NexION 2000 and 1000 ICP-MS concentric glass and quartz MEINHARD nebulizers. Metal-free and 6 inches in length.
-
0.5 meters of .044 OD X .018 ID Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines. (10-pack)
-
FG+ Gas Quick Connect for MEINHARD Nebulizers
PerkinElmerFG Gas Quick Connect for MEINHARD Nebulizers with maria for both small bore and standard bore nebulizers.
-
Replacement connector and sample tubing for U-Series concentric nebulizers. Supplied as a pack of 10.
-
GemTip Cross-Flow II Nebulizer for Optima 8x00
PerkinElmerThe PerkinElmer GemTip Cross-Flow II Nebulizer is for use with the Optima 8x00 ICP-OES. It is an excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and samples with less than 5% dissolved solids.
-
Apex-ST PFA MicroFlow Nebulizer
PerkinElmerHigh temperature apex-ST PFA MicroFlow nebulizer with external 1/4-28 threaded connector. These nebulizers allow self-aspiration at low sample consumption rates with the apex high sensitivity desolvation system.
-
-
EzyFit Glass Mixing T-piece
PerkinElmerReplacement mixing chamber/combiner for internal standard kit.
-
The Single Cell Application Module within PerkinElmer’s Syngistix ™ for ICP-MS software is the ideal tool for laboratories analyzing metal content in cells, either from bioaccumulation of metals or metallic nanoparticles in solution or measuring the intrinsic metal content of the cell. This unique…