The Precellys Evolution is the most efficient and flexible bead beating tissue homogenizer on the market. Thanks to its powerful 3D precession movement associated to a high energy motor (up to 10 000rpm) and an exclusive tube locking system, the Precellys Evolution can homogenize any sample from…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 3ml

* FastPrep 24 is he most advanced sample preparation system available * Provides the highest yields of DNA, RNA and proteins * Process any tissue or cellular sample type with high-quality results * Short processing times * Intuitive software, user-friendly touch screen The…

The BeadBeater disrupts microorganisms, single-cell preparations and pulverized plant and animal tissue with better than 95 percent efficiency. Up to 80 grams (wet weight) of cells can be processed in a typical three minute run. Relying on a unique crushing or cracking action rather than high shear…

Oilite® bearings are recommended for dry sample processing. These bearings are not autoclavable.

Bead beater ideal for lysing, extraction, or homogenization applications, utilizing an aggressive vertical mixing motion. Supplied with holders to hold vertically 12 microtubes (1.5 or 2.0ml), 6 15ml tubes, or 3 50ml tubes, and 12 microtubes (1.5 or 2.0ml) horizontally. Beads are also…

Mfr. No. PK-01200S and PK-02200S Ideal for micro-homogenizing in following tubes; 500ul, 1.5ml, and 2ml micro-tubes Volumes as small as 0.05ml can be easily homogenized in a matter of seconds 5mm flat-bottom generator probe designed for liquid and soft samples Ideal for…

Adapter is required for all Mixer Style Homogenizer Product Line generator probes. (One adapter is included with each Omni Mixer, Omni Macro, and Omni Macro-ES)

Pre-loaded 2 mL disruption tubes are ideal for fast and simple setup - add samples and you're ready to go. Vials are self standing, making it easier to add samples. Pre-filled with your choice of molecular biology grade silica beads, acid washed silica or zirconia beads, silica beads, or steel balls.

2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…

When testing and optimizing formulas, high process safety is paramount. This system enables processing of complex material systems with absolutely minimal loss of mass and minimal energy. This miniature format production system delivers efficent, replicable results like those of our inline machines…

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 15ml

High-throughput adapter for the FastPrep-96 that holds 96 x 2 mL Lysing Matrix Tubes. The ergonomic design of the adapter ensures an easy loading of Lysing Matrix tubes that remain securely sealed during homogenization. Ideally suited for DNA and RNA isolation. Enzyme isolation and protein…

Stainless Steel and Steel Chamber Assemblies For use with 3410B54 Macro ES, 3410B05 Mixer, and 3410B10 Macro Power Series Homogenizers Available in blade or generator probe style Aerosol contained safety sealed systems meet both NIH and CDC guidelines for aerosol containment (Spec…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

Replacement teflon o-ring used in the cap of a SS Lysing Matrix tube to provide a leak-proof closure.

Hollow glass pestle allows addition of ice water for chilling samples during homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a…

Bead tubes are pre-filled with an optimized amount of lysing matrix. Bead Media: Glass, Metal, Ceramic Compatible with: Bead Ruptor 4, 12 and 24 Certification: RNase & DNase free Soft Tissue Homogenizing Mix Recommended for: soft tissues, brain, liver, kidney, spleen,…

Hollow glass pestle allows addition of ice water for chilling samples during homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a…

Replacement parts, one bowl

Homogenizer drives are used as a source of motor for dis-aggregating tissue samples into individual cells. The drive motor can be set to a special rpm depending on the type of cell being used. The drives are typically bolted to an upright stand for support during the operation. Our stand is for…

The Omni Macro Homogenizer is a powerful 1800 watt homogenizer that is compatible with a wide range of generator probes, blade assemblies and sealed containers to offer the perfect mix of dependability, versatility and power. The Omni Macro is ideally suited for homogenizing, blending and creating…

ST tools are recommended for use with tissue and other fibrous materials Saw tooth design creates a cutting and tearing action for shredding fibrous materials Made of high quality stainless steel  

The Mini-Beadbeater-16 is a high-energy cell disrupter designed to handle four to sixteen samples at a time. The Mini-BeadBeater-16 disrupts microbial cells and plant and animal tissue by violently agitating four to sixteen 2 ml screw-cap microvials containing small glass, ceramic or steel beads…

Required to use Omni Tip™ Plastic Probes with Omni TH, µH, GLH and PDH.

Medium-scale adapter for the FastPrep-96 that holds 20 x 15 mL Lysing Matrix Tubes. Ideally suited for DNA and RNA isolation. Enzyme isolation and protein production. Isolation of natural products. Food preparation for quality analysis. Biopharma manufacturing. Forensic applications. …

The Cryoplate keeps sample lids cold during the grinding process. Used with the Cryo-Block or Cryo-Adapter (#2650) for titer plates. The Kryo-Tech accessories are used to chill samples to cryogenic temperature and to maintain temperature during grinding in the Geno/Grinder.

For POLYTRON® PT 3100 D and PT 6100 D, for measuring the product temperature. Probe can be directly connected to the rear panelof the device. Temperature range is displayed on LCD display with a range of 0°C to 120°C If the temperature probe is used with the PC software, you…

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 1ml

Deep-well reinforced titer plate with a 96-well format. Each square well has a volume of 1.4 mL and a working volume of 1.0 mL. Compatible with our 2010 Geno/Grinder due to the toughened wells that withstand bead beating. This plate can also be used with the 1600 MiniG.