Heating/Cooling Blocks, Supplies
-
Eppendorf Tube® 5.0 mL System
EppendorfEppendorf Tube® 5.0 mL System. Eppendorf Tubes are the benchmark for simple and safe sample preparation from 0.5 to 2.0 mL. For larger volumes, 15 mL and 50 mL conical tubes are commonly used. With medium sample volumes you may face an issue: they need to be processed with large conical screw…
-
DryChill™ Ice-free Cooling Block
Benchmark ScientificThe DryChill cooling blocks are designed to store samples safely on the lab-bench without sample degradation due to temperature increase of fluctuation. Unlike traditional ice buckets, these blocks do not require any ice and are uniquely designed to minimize condensation, resulting in a…
-
Microcentrifuge Tubes (5890J51, 5890J55, 5890J61, 1231R87, 1231R88) Constructed from a solid anodized aluminum block, the close contact of tubes to block walls allows for maximum heat retention. Single block. Titer Plate (5890J65) Constructed from a solid anodized aluminum block. Ideal for…
-
OptiTherm® Recovery Flask Inserts
ChemglassOptitherm™ blocks provide a SAFE and cost effective solution for replacing your existing oil baths and heating mantles. The innovative PTFE shield on the unit reduces the exterior exposed surface temperature by as much as 100°C. For example, the PTFE shield would be approximately 80°C…
-
Compact Dry Bath Accessories
Thermo ScientificIncrease your application capabilities with a variety of accessories for the Thermo Scientific™ Compact Dry Baths/Block Heaters.
-
Multi-Use Well Plate/Tube Rack
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Weight: 5.0 lbs Weight metric: 2.3 kg Dimensions: 6.0" x 8.0" x 1.5"
-
Single Block, 20 x 2.0 ml tubes
CorningThis is a single block, 20 x 2.0 mL tubes, for use with Corning® LSE™ Digital Dry Bath Heater.
-
SYNTHWARE Heat Transfer Block for Round Bottom Flasks
Kemtech AmericaHeat Transfer Block, Round bottom flasks, Synthware, Holds 5, 10 and 25mL round bottom flasks.
-
Aluminium Dri-Block® Inserts
Techne (Cole-Parmer)Manufactured from anodised aluminium, Techne has the widest choice of interchangeable block inserts of any manufacturer. This allows Techne Dri-Block® heaters to accommodate the widest variety of microtubes, test tubes, cups, plates, cuvettes and vials on the market, resulting in the most…
-
HB120-S LED Digital Dry Bath
DLAB Scientific• A wide range of temperature control 25-120°C • Timer function support is available • Temperature control accuracy - ±0.5? • Time setting range - 0min~99h59min • …
-
-
Heat Transfer Block - Microscale
Ace GlassAluminum heat transfer block, 9594-12 for use in place of a glass sand bath in Microscale experiments. Offers excellent heat transfer and will not interfere with magnetic stirring. Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect…
-
Digital Dry Baths/Block Heaters
Thermo ScientificIncrease lab versatility with the Thermo Scientific™ digital dry baths, which offer a range of configurations with interchangeable modular blocks for a variety of application needs. Designed for basic to advanced applications with a max temperature of 130°C, a timer and available in 1, 2…
-
High Insulation Cover for all Dry Bath Blocks
Crystal TechnologiesCTI’s Digital Dry Baths are microprocessor controlled with an automatic PID temperature control program, providing accurate and uniform temperature distribution on the thermal block. These Digital Dry Baths are ideal tools for a wide variety of life science, clinical and general chemistry applications.
-
LSE™ Digital Dry Bath Heaters
CorningThe Corning Digital Dry Bath Heaters are available in single, dual, and four block configurations and provide a broad temperature range up to 150°C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories. They…
-
EchoTherm™ Orbital Mixing Chilling/Heating Dry Baths
Torrey Pines ScientificSC20 Orbital Mixing Chilling/Heating Dry Bath Energy efficient Peltier design Orbital mixing at speeds from 200 to 1000 rpm Built-in data logger Compact size UL, CSA and CE compliant The SC20 Orbital Mixing Chilling/Heating Dry Bath is a compact, solid-state device…
-
Similar to our CLS-3620, but made to hold 2 each 96 well PCR plates and PCR tubes. Because of its two tray design, transferring from one PCR plate to the other or process two different plates at once. Dimensions are 6.2” x 6.7” x 1”.
-
PIE-BLOCK Reaction Block System
ChemglassSafety Pie Plate Holder keeps up to Four pie wedges securely locked together on the hotplate Aluminum construction provides excellent heat transfer while not interfering with the magnetic field Interchangeable pie wedges permit various sized vials or flasks on one hotplate Holes are spaced…
-
Tri-Block™ Reaction Block
ChemglassReaction TRI-BLOCK is designed to fit directly on 135mm diameter circular top hot plate stirrers. Versatile design of the tri-block fits the most common vial sizes on one hot plate: 11ea- 1 Dram vials, 11ea- 2 Dram vials and 7ea– 20mL scintillation vials. Tri-block is hard coat anodized black…
-
Digital Dry Bath Accessories
Benchmark ScientificThe Digital DryBaths offer digital control over both temperature and time, eliminating the need for an external thermometer or timer. Available in three configurations, the digital dry baths offer capacity for up to four blocks. The cavities within the high grade aluminum blocks are…
-
Features: Offers a Clean and Safe Alternative for Heating NMR Tubes in Oil Baths. Eliminates Hassle of removing Oil Residue from Outside of the NMR Tubes. Aluminum Construction Offers Excellent Heat Transfer. Ideal for Performing Kinetics Studies Where you run a standard…
-
Analogue Dri-Block® Heaters
Techne (Cole-Parmer)Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years, offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of precision temperature control for general, routing applications and…
-
ThermoMixer
EppendorfSample preparation redefined. Improve your assay results by mixing and incubating samples at the same time. The ThermoMixer C convinces with its quick and easy-to-exchange SmartBlocks™ for all common lab vessels, new and improved program functions, and high level of stability for every mixing…
-
Aluminum Heating Blocks
DWK Life Sciences (Kimble)Ideal for use in place of a sand bath in microscale experiments. Excellent heat transfer Does not interfere with magnetic stirring
-
Rotor, Microplate, 96 x 0.2 mL, Ea.
EppendorfFor use with MTPs, PCR plates and up to 2 x 96 0.2 mL PCR tubes and tube strips Load MTPs and PCR plates directly To spin down individual PCR tubes or tube strips, PCR plates and MTPs without frame, use the Work tray and Frame Rotor is autoclavable at 121°C, 20 min Two MTPs can be…
-
Digital Dri-Block® Heaters
Techne (Cole-Parmer)Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years. Now Techne® are proud to introduce the new, updated 2014 range offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of…
-
Touchscreen Dry Bath/Block Heaters
Thermo ScientificDesigned to achieve precise temperature stability and uniformity with an easy-to-use touch screen controller. With 1, 2 and 4 block models, a broad range of heat blocks and a wide temperature range of ambient +5°C to 130°C, you’re sure to find the dry bath to fit your application…
-
isoBlock™ Digital Dry Baths
Benchmark ScientificThe new IsoBlock from Benchmark contains two isolated block chambers. Each chamber is controlled independently, allowing the dry bath to serve as two dry baths in one. The hinged (and removeable) lid is designed with a dividing wal, when the lid is closed this dividing wall acts as a barrie,…
-
Digital Dry Bath
Benchmark ScientificThe Digital Dry Baths offer digital control over both temperature and time, eliminating the need for an external thermometer or timer. Available in three configurations, the digital dry baths offer capacity for up to four blocks. The cavities within the high-grade aluminum blocks are…
-
Single Block, 24 x 1.5 ml tubes
CorningThis is a single block, 24 x 1.5 mL tubes, for use with Corning® LSE™ Digital Dry Bath Heater.
-
-
SYNTHWARE Heat Transfer Block for Mini Vials
Kemtech AmericaHeat Transfer Block, Minivials, Synthware, Holds 3.0 and 5.0 mL heavy wall reaction vials.