For use with Corning® LSE™ Digital Dry Bath Heaters, Single Block.

Designed to achieve precise temperature stability and uniformity with an easy-to-use touch screen controller. With 1, 2 and 4 block models, a broad range of heat blocks and a wide temperature range of ambient +5°C to 130°C, you’re sure to find the dry bath to fit your application…

The new MyBlock™ HL is the first and only mini heat block featuring a heated lid for protecting samples against unwanted condensation and evaporation. Both the block and lid temperature can be selected independently in increments of 0.1°C, making this MyBlock the ideal choice for the…

The DryChill cooling blocks are designed to store samples safely on the lab-bench without sample degradation due to temperature increase of fluctuation.  Unlike traditional ice buckets, these blocks do not require any ice and are uniquely designed to minimize condensation, resulting in a…

This is a single block, 20 x 2.0 mL tubes, for use with Corning® LSE™ Digital Dry Bath Heater.

Features: Offers a Clean and Safe Alternative for Heating NMR Tubes in Oil Baths. Eliminates Hassle of removing Oil Residue from Outside of the NMR Tubes.  Aluminum Construction Offers Excellent Heat Transfer. Ideal for Performing Kinetics Studies Where you run a standard…

Safety Pie Plate Holder keeps up to Four pie wedges securely locked together on the hotplate Aluminum construction provides excellent heat transfer while not interfering with the magnetic field Interchangeable pie wedges permit various sized vials or flasks on one hotplate Holes are spaced…

OptiTherm® aluminum reaction / heating blocks provide a SAFE and cost effective solution for replacing your existing oil baths and heating mantles. The innovative PTFE shield on the unit reduces the exterior exposed surface temperature by as much as 100°C. For example the PTFE shield would…

Chill, freeze or heat and run unattended temperature profiles automatically Precise, digital control Energy efficient Peltier design Control at ambient Temperature ramping at exact rates Built-in data logger Applications include unattended restriction digestions or…

Microcentrifuge Tubes (5890J51, 5890J55, 5890J61, 1231R87, 1231R88) Constructed from a solid anodized aluminum block, the close contact of tubes to block walls allows for maximum heat retention. Single block. Titer Plate (5890J65) Constructed from a solid anodized aluminum block. Ideal for…

Benchmark's myBlock series is a "next generation" product line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition,…

Aluminum heat transfer block, 9594-12 for use in place of a glass sand bath in Microscale experiments. Offers excellent heat transfer and will not interfere with magnetic stirring. Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect…

For dry block heaters Machined and fabricated from solid aluminum Anodized to resist oxidation Rows and columns are labeled on appropriate blocks for easy vessel identification Each block module measures 3" x 3 3/4 " x 2". See Thomas numbers 5152M65 to M75 for additional blocks.

SC20 Orbital Mixing Chilling/Heating Dry Bath Energy efficient Peltier design Orbital mixing at speeds from 200 to 1000 rpm Built-in data logger Compact size UL, CSA and CE compliant The SC20 Orbital Mixing Chilling/Heating Dry Bath is a compact, solid-state device…

This is a single block, 24 x 1.5 mL tubes, for use with Corning® LSE™ Digital Dry Bath Heater.

Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years, offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of precision temperature control for general, routing applications and…

Dry blocks for us with Grant Dry Block Heating Systems: QBD1, QBD2, QBD4, QBH2, QBA1 and QBA2.

The Digital DryBaths offer digital control over both temperature and time, eliminating the need for an external thermometer or timer. Available in three configurations, the digital dry baths offer capacity for up to four blocks. The cavities within the high grade aluminum blocks are…

Temperaure set between 0-100°C with programmable time up to 24 hours. Allow for up to 3 segments of time phases and temperature ramps. Each segment runs automatically to the next segment. The interchangement of different blocks is easy and convenient. Applications: Enzymatic…

Digital Dry Bath with Automatic PID Temperature Control Program Crystal Technology digital dry baths are microprocessor controlled with an automatic PID temperature control program, providing accurate and uniform temperature distribution across the thermal block. Digital dry baths are ideal…

For microtubes, stability and uniformity ± 0.1°C, range ambient + 5 to 100°C A compact and flexible fixed block system for rapid and precise heating of microtubes up to 100°C. Stability ± 0.1°C Digital temperature control for optimum precision …

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Weight: 5.0 lbs Weight metric: 2.3 kg Dimensions: 6.0" x 8.0" x 1.5"

•    A wide range of temperature control 25-120°C •    Timer function support is available •    Temperature control accuracy - ±0.5? •    Time setting range - 0min~99h59min •  …

The DynaBloc heating system supplies low-cost, highly efficient, simultaneous stirring and/or heating of multiple samples contained within various sizes of small, round bottom flasks. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm)…

Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years. Now Techne® are proud to introduce the new, updated 2014 range offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of…

The new IsoBlock from Benchmark contains two isolated block chambers. Each chamber is controlled independently, allowing the dry bath to serve as two dry baths in one. The hinged (and removeable) lid is designed with a dividing wal, when the lid is closed this dividing wall acts as a barrie,…

Sample preparation redefined. Improve your assay results by mixing and incubating samples at the same time. The ThermoMixer C convinces with its quick and easy-to-exchange SmartBlocks™ for all common lab vessels, new and improved program functions, and high level of stability for every mixing…

Heat Transfer Block, Round bottom flasks, Synthware, Holds 5, 10 and 25mL round bottom flasks.

The Digital Dry Baths offer digital control over both temperature and time, eliminating the need for an external thermometer or timer. Available in three configurations, the digital dry baths offer capacity for up to four blocks. The cavities within the high-grade aluminum blocks are…

Digital block heater provides precise temperature control in small vessels. Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling…

For precise temperature control; ±0.1°C Provide a safe, dry, constant temperature source in the laboratory for the purpose of incubation, boiling, inactivation, wet ashing, enzyme analysis, and a variety of clinical and industrial applications. NOTE: aluminum insert blocks are not included.

This is a single block, 24 x 0.5 mL tubes, for use with Corning® LSE™ Digital Dry Bath.